Alamarin Jet: Pioneering Reliability and Innovation in Waterjet Propulsion
As a world-leading manufacturer of waterjet propulsion units, Alamarin-jet excels in providing specialized propulsion solutions that cater to the rigorous demands of marine sectors such as special forces. Recognized globally for their robust engineering and innovative control features, they are the trusted partner when reliability and dedicated service are at the forefront. With a commitment to excellence and a reputation as a reliable supplier to global marine sectors, Alamarin-jet continues to set industry standards and support their clients with unparalleled expertise and support.Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yachtsupply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Ref. BB
|
1-2 weeks delivery time The Alamarin Jet 10763 seal sleeve is a protective sleeve component fitted in the Jet-245 245A frame, providing a smooth, controlled sealing surface for the jet drive’s sealing interface. By supporting proper seal contact and shielding the frame area from wear, it helps maintain dependable water-jet operation on Alamarin Jet-245 propulsion units. |
$ 94.95
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10764 anode plug is a protective element installed in the stator assembly of Alamarin Jet-245 and Jet-340 water-jet units, including the 340E Rev. A and 340E2 variants. It helps reduce galvanic corrosion inside the jet’s wetted stator area, supporting long-term reliability of critical propulsion components in demanding marine service. |
$ 236.66
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10765 spacing element supports correct component positioning in the Jet-245 water-jet bearing and main shaft assembly, helping maintain alignment and smooth power transmission through the drive. Used as a bearing housing extension in the 245C setup, it assists reliable bearing support and consistent shaft running under marine propulsion loads. |
$ 297.20
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10766 support ring is a locating and support element used in the Jet-245 water-jet bearing and main shaft assembly for the 245C configuration. It helps maintain correct component positioning and load support around the main shaft and bearing area, contributing to stable shaft running and dependable propulsion performance. |
$ 105.05
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10772 shaft sleeve is a protective sleeve element used in the Jet-245 245C bearing and main shaft assembly, helping safeguard the shaft interface in Alamarin Jet-245 water-jet propulsion units. By providing a controlled running surface where shaft components and sealing or bearing areas interact, it supports smooth operation and long-term driveline reliability. |
$ 190.26
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10773 shaft sleeve is a protective sleeve component used in the Jet-245 water-jet bearing and main shaft assembly for the 245C configuration. It helps safeguard the main shaft’s running surface where seals and bearing-related interfaces operate, supporting smooth rotation and dependable drivetrain reliability in demanding marine propulsion use. |
$ 593.66
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10775 rear bearing housing cover is a protective closing component for the Jet-245 rear bearing housing assembly (10777), helping keep the bearing housing properly sealed and protected in demanding water-jet propulsion service. Designed for a correct OEM fit on Alamarin Jet-245 water jets, it supports clean, reliable operation of the aft bearing area by shielding internal components from the marine environment. |
$ 233.96
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10776 rear bearing housing supports and locates the rear-end bearing arrangement in Alamarin Jet-245 water-jet propulsion units, helping maintain stable shaft alignment under thrust and radial loads. Installed as part of the jet drive bearing housing assembly (reference 10777), it protects the drivetrain by keeping critical rotating components correctly seated for smooth, reliable operation. |
$ 326.75
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10777 rear bearing housing secures and supports the rear-end bearing arrangement within the Jet-245 stator assembly, helping keep the driveline running true under water-jet thrust and side loads. Designed for Alamarin Jet-245 (245E) propulsion units, this rear-end support housing promotes stable shaft alignment and dependable jet drive operation. |
$ 780.68
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10778R adapter flange connects DIN-150 interfaces to CV-21 couplings and includes screws. |
$ 1,607.07
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10783 adapter flange is designed for DIN-120 to CV-21 drivetrain connections. |
$ 812.33
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10783R adapter flange includes mounting screws for DIN-120 to CV-21 installations. |
$ 865.02
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10785 adjustment sleeve is a precision alignment component used in the Jet-245 245D impeller assembly, helping set and maintain correct positioning of rotating jet-drive parts. Installed as part of the impeller system in Alamarin Jet-245 water jets, it supports stable running conditions and consistent thrust performance after service or rebuild work. |
$ 263.73
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10786 isolation ring is a fit-critical element used in the Jet-245 245D impeller assembly, helping maintain controlled clearances and stable component positioning under operating loads. Installed as part of the impeller package on Alamarin Jet-245 water jets, it supports smooth, efficient thrust production by keeping the rotating assembly properly isolated within the drive. |
$ 87.52
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10789 stator seal is a sealing element for the Jet-245 water-jet stator assembly, supporting clean, controlled internal flow by preventing unwanted leakage paths around the stator area. Designed for Jet-245 245E stator applications, it helps maintain efficient thrust production and dependable jet drive operation. |
$ 240.33
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10791 choker 122 is intended for controlled flow restriction applications. |
$ 2,202.74
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10792 choker 126 supports regulated hydraulic and fluid flow systems. |
$ 2,202.74
-
+
|
|
1-2 weeks delivery time The Alamarin Jet 10795 nozzle 130 is designed for marine waterjet flow control applications. |
$ 2,202.74
-
+
|
What are the main advantages of using waterjet propulsion units in marine applications?
Waterjet propulsion units are renowned for their robust and efficient design, making them ideal for various marine applications around the world, from SAR operations to luxury yachting. These units provide exceptional maneuverability and rapid acceleration, courtesy of their advanced control systems, which are crucial for sectors requiring high reliability, such as special forces and high-performance marine vessels. Leading manufacturers like Alamarin-Jet are at the forefront of this technology, delivering waterjet solutions that excel in both high power inputs, such as 1500kw and 2040hp, and operational efficiency across global marine sectors.
What are some examples of customized features that Alamarin-Jet provides to meet the specific requirements of their marine sector clients?
Alamarin Jet, as a world-leading manufacturer of waterjet propulsion units, offers several customized features tailored to meet the unique demands of its diverse marine sector clients. For special forces and high-demand sectors, they provide enhanced control systems for greater precision and rapid response capabilities. Additionally, for sectors like fishing, where durability and efficiency are paramount, Alamarin-Jet incorporates robust designs that withstand harsh marine environments while maintaining optimal performance. As a trusted partner in the global marine industry, their focus on reliability and service ensures that each waterjet unit is built to the specific operational needs and service rate expectations of their clients.
How do waterjet propulsion units enhance maneuverability and control in high-performance marine applications?
Waterjet propulsion units significantly enhance maneuverability and control in high-performance marine environments by allowing vessels to maintain high speeds while executing precise movements. Leading manufacturers like Alamarin-Jet employ advanced control technologies that provide instant thrust direction changes and superior handling, essential for sectors requiring rapid response such as special forces and high-speed recreational activities. As a trusted global supplier, Alamarin-Jet's robust and efficient design philosophy ensures that these systems are at the forefront of operational excellence, providing reliable service in demanding marine conditions worldwide.