Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus NSF25 No-Smell Filter (article NSF25) is a large odour-absorbing filter designed for 25 mm breather hose systems on marine waste water tanks. It prevents unpleasant odours from escaping through the vent line by using a replaceable odour-absorbing cartridge, which must be renewed annually. The unit measures 148 × 150 × 162 mm and installs easily using standard hose clamps.
|
$ 167.03
-
+
| ||
|
1-2 weeks delivery time The Vetus NSF38 No-Smell Filter (article NSF38) is a large odour-absorbing filter designed for 38 mm breather hose installations on marine waste water tanks. It prevents unpleasant tank odours from escaping through the vent line using a replaceable odour-absorbing element, which must be renewed annually. Compact and easy to install, the filter measures 148 × 150 × 162 mm.
|
$ 167.03
-
+
| ||
|
1-2 weeks delivery time The Vetus VRF56A Vacuum Valve (article VRF56A) is a Ø56 mm corrosion-free safety valve designed to protect waste water tanks during shore-based pump-out operations. When vacuum increases inside the tank, the valve automatically opens to admit air and prevent tank deformation. With a free flow area exceeding 1,100 mm², it meets ISO 8099 requirements and replaces the need for oversized vent lines in systems with restricted hose diameters.
|
$ 61.29
-
+
| ||
|
1-2 weeks delivery time The Vetus WWSENSORA Waste Water Sensor (article WWSENSORA) is a 12/24V level sensor designed for marine waste water tanks. It features an adjustable arm length ranging from 200 mm to 412 mm, allowing precise adaptation to different tank depths. This compact and reliable unit offers easy installation and provides accurate level measurement for both black and grey water tanks.
|
$ 273.80
-
+
| ||
|
1-2 weeks delivery time The Vetus WWCP Waste Water Control Panel (article WWCP) is a 12/24V management panel for marine holding tank systems. It monitors tank levels via a compatible sensor and displays 25%, 50%, 75%, and 100% fill status with LEDs, while offering both automatic and manual pump-out control. Equipped with a security lock, relay output for toilet flush lockout, and compatibility with remotely operated valves, the 85 × 85 × 40 mm panel ensures safe and efficient waste system operation.
|
$ 636.50
-
+
| ||
|
1-2 weeks delivery time The Vetus ILTCONW Waste Water Connection Kit (article ILTCONW) provides a complete multi-port interface for waste water tanks, suitable for custom steel, aluminium, and Vetus rigid tanks. Designed for use with the ILT120 inspection port, it centralises all inlet, outlet, vent, and sensor connections into one disc. The kit includes 38 mm, 25 mm, and 19 mm inlet fittings, a 38 mm discharge fitting that can serve as a suction pipe base, a 19 mm vent port, and a 5-hole SAE flange for level sensors. Cut-out diameter is 159 mm, disc diameter 120 mm.
|
$ 85.54
-
+
| ||
|
1-2 weeks delivery time The Vetus EMP14012B Waste Water Pump (article EMP14012B) is a 12V self-priming marine pump designed for black water, grey water, and bilge applications. It delivers 27 litres per minute at zero head and uses durable duck-bill valves to prevent blockages. Featuring fully rotating 38 mm hose connections, a 6 A power draw, 3 m suction capability, 5 m delivery height, and a 7 kg construction, it offers efficient and flexible installation for demanding onboard waste systems.
|
$ 594.70
-
+
| ||
|
1-2 weeks delivery time The Vetus EMP14024B Waste Water Pump (article EMP14024B) is a 24V self-priming marine pump designed for black water, grey water, and bilge applications. It delivers 27 litres per minute at zero head and uses reliable duck-bill valves to prevent clogging. Featuring fully rotating 38 mm hose connections, a 7 kg build, 3 m suction height and 5 m delivery height, the pump ensures efficient performance and flexible installation in demanding marine waste systems.
|
$ 594.70
-
+
| ||
|
1-2 weeks delivery time The Vetus BTKIT (article BTKIT) is an installation kit designed for synthetic waste water tanks and includes two securing straps, an inspection lid, and a key for angled fittings. Suitable for various tank configurations, the kit provides essential mounting and service components. The inspection port requires a 115 mm cut-out and has an overall diameter of 156 mm.
|
$ 80.82
-
+
| ||
|
1-2 weeks delivery time The Vetus WTS78038S Extraction Pipe (article WTS78038S) is a straight 780 mm waste water tank extraction pipe equipped with a Ø 38 mm hose nipple. Suitable for Vetus and other waste water tank systems, it can be shortened to the required length and supports wall thicknesses up to 17 mm, ensuring reliable and efficient pump-out performance.
|
$ 50.03
-
+
| ||
|
1-2 weeks delivery time The Vetus WTS78038B Extraction Pipe (article WTS78038B) is a 780 mm adjustable-length waste water extraction pipe equipped with a Ø 38 mm right-angle hose nipple. Designed for marine waste water tanks, it fits Vetus and other brands and supports wall thicknesses up to 17 mm. The angled connection ensures optimal routing in installations with limited vertical or horizontal clearance.
|
$ 53.79
-
+
| ||
|
1-2 weeks delivery time The Vetus EIP12 Electric Impeller Pump (article EIP12) is a 12V electric pump designed for marine applications within the electric propulsion accessory system. Built for reliable fluid transfer, it features an impeller-driven design that ensures continuous flow and stable operation under varying onboard conditions.
|
$ 241.12
-
+
| ||
|
1-2 weeks delivery time The Vetus MV12A1/2 Motorized Ball Valve (article MV12A1/2) is a 12V remotely operated marine valve with a 1/2" internal thread. Featuring a stainless steel AISI 316 ball, aluminium housing, metal gears, and 40 Nm torque, it provides reliable automated control of seacocks and fluid lines. With ignition-protected construction (ISO 8846 Marine), 2.2 A power consumption, and compact 130 × 224.5 mm dimensions, it offers high durability and safe installation in engine rooms.
|
$ 975.23
-
+
| ||
|
1-2 weeks delivery time The Vetus MV12A3/4 Motorized Ball Valve (article MV12A3/4) is a 12V stainless steel AISI 316 ball valve with a 3/4" internal thread, designed for remote operation of seacocks and fluid lines. Featuring an aluminium housing, metal gears, 40 Nm torque output, 2.2 A current draw, and ISO 8846 Marine ignition protection, it provides reliable, maintenance-minimal performance in engine rooms and other critical onboard locations.
|
$ 1,009.58
-
+
| ||
|
1-2 weeks delivery time The Vetus MV12A1 is a 12-volt stainless-steel AISI 316 motorized ball valve with a 1" internal thread, designed for remote control of seacocks and onboard fluid systems. With a powerful 40 Nm torque actuator, aluminium housing, metal gears, ISO 8846 Marine ignition protection, and thermal overload safeguards, it delivers long-life reliability and safety in demanding marine environments.
|
$ 1,078.95
-
+
| ||
|
1-2 weeks delivery time The Vetus MV12A11/4 is a 12-volt motorized stainless-steel AISI 316 ball valve with a 1¼" internal thread, built for remote seacock and onboard fluid system control. Featuring a 40 Nm high-torque actuator, aluminium housing, metal gears, ISO 8846 Marine ignition protection, and thermal overload safety, it provides robust operation in marine environments, with dimensions of 130 × 185 mm and a 3.4 kg construction.
|
$ 1,163.81
-
+
| ||
|
1-2 weeks delivery time The Vetus MV12A11/2 is a 12-volt motorized AISI 316 stainless-steel ball valve with a 1½" internal thread, engineered for remotely operated seacocks and onboard fluid systems. Featuring a 40 Nm high-torque actuator, aluminium housing, metal gears, ISO 8846 Marine ignition protection, and thermal overload safeguards, it offers dependable operation in harsh marine environments, with dimensions of 130 × 224.5 mm and a robust 4.2 kg design.
|
$ 1,250.02
-
+
| ||
|
1-2 weeks delivery time The Vetus MV24A1/2 is a 24-volt motorized AISI 316 stainless-steel ball valve with a 1/2" internal thread, designed for remote operation of seacocks and onboard fluid systems. Featuring a 40 Nm actuator, aluminium housing with metal gears, thermal overload protection, and ISO 8846 Marine ignition safety, it offers dependable performance in confined or hard-to-reach installations, weighing 2.2 kg with a height of 185 mm.
|
$ 975.23
-
+
| ||
|
1-2 weeks delivery time The Vetus MV24A3/4 Motorized Ball Valve (article MV24A3/4) is a 24V remotely operated 3/4" valve designed for marine seacocks and other installations where accessibility and reliability are essential. It features an aluminium housing, AISI 316 stainless steel ball valve, metal transmission, 40 Nm maximum torque, thermal overload protection, and suitability for diesel fuel systems. With dimensions of 130 mm in length and height, 2.4 kg weight, 1.2 A current draw, ignition-protected motor, and an operating temperature range from -20°C to +45°C, it ensures robust performance in demanding environments.
|
$ 1,009.58
-
+
| ||
|
1-2 weeks delivery time The Vetus MV24A1 Motorized Ball Valve (article MV24A1) is a 24V remotely operated 1" valve designed for marine seacocks and installations requiring secure, reliable, and easily controlled flow management. It features an aluminium housing, AISI 316 stainless steel ball valve, metal gears, 40 Nm torque, thermal overload protection, and suitability for diesel fuel systems. With a length of 130 mm, height of 185 mm, 2.8 kg weight, 1.2 A current draw, and an operating temperature range from -20°C to +45°C, the unit provides dependable performance even in demanding engine-room environments thanks to its ISO 8846 Marine ignition-protected motor.
|
$ 1,078.95
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.