Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus SET0017 lower unit complete kit is a replacement set for Vetus bow thruster installations, supplied as a tailpiece/lower unit solution for the BOW3512 and BOW5512A models. The set includes a tail piece complete with dog drive, tunnel gasket, tailpiece wedge and gaskets, securing screws with spring washers, a drive pin, and a pre-fitted anode for service and replacement work on Vetus marine thruster systems.
|
$ 955.27
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0020 solenoid switch set is a 24V relay/solenoid pack identified as BP21924, intended as a replacement unit for Vetus bow and stern thruster models rated at 55 Kgf, 60 Kgf, 75 Kgf, and 80 Kgf. This solenoid pack is specified for integration in the vessel’s maneuvering system and is supplied as a spare part for Vetus marine thruster systems.
|
$ 363.74
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0022 adapter sleeve set is an intermediate coupling intended for the BOW3512B bow thruster, used to provide a secure connection between mating components within the thruster assembly. It is supplied as a spare part for Vetus marine thruster systems and is specified for BOW3512B application.
|
$ 50.73
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0023 carbon brush service set is a 4-piece replacement brush kit with individual brush dimensions of 12.5 x 8 x 25 mm, intended for maintenance of Vetus BOW23 and BOW35 thrusters as well as the Vetus Alex II 12V windlass. Supplied as a set of four carbon brushes, it is specified with a listed weight of 0.01 kg and is categorized as a spare part for Vetus marine thruster systems.
|
$ 272.80
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0029 carbon brush set is a 4-piece replacement brush kit for Vetus BOW7512 thrusters fitted with the motor marked TSL125A 681. Each carbon brush is sized 9 x 30 x 28 mm, supporting correct fitment for maintenance of the thruster motor electrical interface; the input data also identifies the application as 12V.
|
$ 306.30
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0030 carbon brush kit is a four-piece brush set specified for Vetus bow thruster motor service, including BOW7524. The input lists brush dimensions as 9x20x28 and also 20x9x27,5, and identifies applicability across multiple Vetus thruster models including BOW5012, BOW5024, BOW5512, BOW5524, BOW6012, and BOW6024, as well as BOW55, BOW60, and BOW75 references.
|
$ 325.45
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0031 electric motor and solenoid kit is a complete replacement set for Vetus BOW75 12V bow thruster installations, supplied with a fitted solenoid and a grey solenoid cover with thumbscrews. The set is specified at 7000 W and is stated as compatible with BOW7512 bow thrusters, replacing motors marked “TSL125A 4.4kW” and “EC 4.4/1.2/29”.
|
$ 1,751.66
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0035 lower-unit tailpiece kit is a complete replacement set for Vetus bow thruster lower unit (thruster leg) service. Supplied as a set including a tail piece complete with spline drive, tunnel gasket, tailpiece wedge and gaskets, securing screws (M8x40 DIN84) with spring washers, a 5 mm x 27.5 mm drive pin, and a pre-fitted anode; it is specified for BOW7512 and BOW7524 B bow thruster models and is also referenced for BOW75 and BOWB110/BOWB130 applications.
|
$ 1,330.49
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0040 carbon brush replacement set (4x) is intended for Vetus bow thruster service on BOW80, BOW95, and BOW125 models, including the BOW9512/24 application. The set is specified with brush dimensions of 12,5x48x32 and is used to maintain consistent electrical contact as part of the thruster’s electrical system maintenance.
|
$ 354.16
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0041 electric motor and solenoid set is a 12V replacement motor assembly supplied with a fitted solenoid for Vetus BOW95 12V bow thruster applications. The set also includes a grey solenoid cover with thumbscrews to support straightforward installation and is listed under spare parts for Vetus marine thruster systems.
|
$ 2,632.28
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0044 solenoid switch set is a 24 V replacement solenoid pack for Vetus bow and stern thruster models with 95, 110, 125, and 160 kgf thrust ratings. Supplied as a spare part for Vetus marine thruster systems, it is intended to restore correct solenoid switching operation on compatible thruster installations and is referenced as replacing BP110.
|
$ 788.09
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0046 thruster tailpiece set is a complete tailpiece assembly supplied as a replacement component for Vetus BOW-series thruster installations. It is specified for BOW95 fitment and is also listed for BOW60 and BOW95 thruster systems; the assembly is supplied excluding the motor assembly and is identified as a replacement for the Vetus BP1200.
|
$ 1,368.78
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0056 carbon brush replacement set is an 8-piece brush kit for the Vetus BOW80 bow thruster motor, suitable for 12V and 24V systems. The brushes measure 12.5 x 20 x 28.5 mm and are specified for motors with markings EC4,7/1,2/36 4.7 kW; the set supports installations where the motor configuration uses either 4 brushes or 8 brushes.
|
$ 804.04
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0057 carbon brush set is a four-piece replacement brush kit for Vetus BOW22024 bow thrusters. Supplied as 4 carbon brushes with size 12,5x48x32, this spare parts set supports thruster maintenance and reliable operation within Vetus marine thruster systems.
|
$ 526.45
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0058 brush-holder set is a service kit for Vetus BOW22024 bow thruster systems, supplied complete with replacement brushes. It is intended as a spare part for thruster maintenance, providing the brush holder component and associated brushes for installation in the BOW22024 unit.
|
$ 315.88
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0059 spring set is a service kit consisting of 8 precision-crafted springs intended for carbon brush assemblies on the BOW22024 model. The springs are specified to support optimal electrical contact and are supplied as spare parts for Vetus marine thruster systems to maintain carbon brush functionality and electrical performance.
|
$ 74.57
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0060 motor-and-solenoid replacement set is a 12 V assembly supplied as a complete motor with a pre-fitted solenoid set, including a grey solenoid cover secured by thumbscrews. It is specified as a spare part for Vetus marine thruster systems and is stated as compatible with Vetus BOW45, BOW55, and BOW60 12 V models.
|
$ 1,435.79
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0078 lower unit tailpiece kit is a replacement assembly for Vetus bow thruster lower units, specified for BOW5512 and BOW5524 B and C models and referenced for BOW35/55 and BOWB057 applications. The kit is supplied as a complete tailpiece set including a tail piece with spline drive and a pre-fitted anode, plus tunnel gasket, tailpiece wedge and gaskets, securing screws with spring washers, and a drive pin for installation.
|
$ 1,043.34
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0079 thruster drive motor and solenoid set is a 24 V replacement assembly for Vetus BOW110, BOW130, and BOW160 bow thrusters. The set is supplied as a complete replacement motor with a fitted solenoid and includes a grey solenoid cover with thumbscrews to support installation and service work in Vetus marine thruster systems.
|
$ 3,493.76
-
+
| ||
|
1-2 weeks delivery time The Vetus SET0080 lower unit tailpiece set is a complete tailpiece replacement kit intended for Vetus bow thruster installations. It is specified as a tailpiece complete set for BOW160 and is compatible with Vetus BOW130 and BOW160 thrusters in both A and B series as part of Vetus marine thruster spare parts.
|
$ 1,969.91
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.