Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus BP20132 intermediate flange assembly is intended for the 140 mm AC Blue BOWA0401 model and is used as a connection interface within Vetus bow thruster systems. It supports stable and secure installation by providing reliable connections in bow thruster applications and is supplied as a spare part for Vetus marine thruster systems.
|
$ 105.29
-
+
| ||
|
1-2 weeks delivery time The Vetus BP2019231 intermediate flange assembly is a connection interface for the 300mm AC Blue bow thruster configuration, intended to provide a stable mechanical connection between system components to support bow thruster performance and overall installation stability. It is listed as a spare part for Vetus marine thruster systems and is referenced for BOWB285, BOWB300, and BOWB320 applications.
|
$ 248.88
-
+
| ||
|
1-2 weeks delivery time The Vetus BP203 gasket assembly (Version III) is a sealing component specified for the BOW2312 thruster unit in Vetus marine thruster systems. It is intended to provide a secure seal to help prevent leakage at the applicable joint interface during thruster operation and service replacement.
|
$ 2.39
-
+
| ||
|
1-2 weeks delivery time The Vetus BP206 sealing O-ring is a 33x2 mm elastomer ring specified for the Vetus BOW2312 system and intended to provide leak-tight sealing in marine service. The input data lists dimensions (h x w x d) of 38 mm x 18 mm x 2 mm, with black, corrosion-resistant elastomer construction, 70 Shore A hardness, and a stated temperature range of -40°C to 120°C. It is described as suitable for high-pressure marine systems and resistant to oils, fuels, and lubricants typically found in marine environments.
|
$ 7.66
-
+
| ||
|
1-2 weeks delivery time The Vetus BP210 carbon brush holder assembly is a bow thruster electrical component intended for BOW5012 and BOW5024 units manufactured from 1994 onwards. It provides secure retention and housing of the carbon brushes to maintain consistent contact for reliable power transmission within the thruster system.
|
$ 40.21
-
+
| ||
|
1-2 weeks delivery time The Vetus BP214A contact block module is a precision-engineered spare part intended for the BPJST joystick, providing the internal contact function required for reliable and responsive operation of the joystick system. It is specified as a component within Vetus marine thruster system spare parts and is designed exclusively for the BPJST control application.
|
$ 10.53
-
+
| ||
|
1-2 weeks delivery time The Vetus BP21643 tailpiece gasket is a sealing component for 400mm tunnel systems used in Vetus bow thruster installations. It is intended to provide a tight seal at the tailpiece interface to prevent leaks, supporting system efficiency and operational safety in marine thruster applications.
|
$ 14.36
-
+
| ||
|
1-2 weeks delivery time The Vetus BP218 replacement lamp set is a 5-piece bulb kit rated at 14V and 80mA for control panel illumination, intended for the BPJSC01 power switch used on Vetus BOW-Panel BPS, BPJ, and BPSM. It is also specified for the BPJ5 and BPJ5D hydraulic joystick panel switch and supports both 12V and 24V installations through selectable voltage via the negative switch wire options.
|
$ 13.31
-
+
| ||
|
1-2 weeks delivery time The Vetus BP21824 lamp set is a five-piece replacement bulb kit specified for 24 V systems with a 35 mA rating and intended for use in the BPJSC01 power switch fitted to Vetus legacy BPS and BPJ panels and the current BPSM panel range. It is also stated as suitable for BPJ5 and BPJ5D hydraulic joystick panel switches, and the common bulb can be used in both 12 V and 24 V installations with voltage selection via the negative switch wire options.
|
$ 10.53
-
+
| ||
|
1-2 weeks delivery time The Vetus BP221 wiring assembly is intended for integration with the BPJST joystick, providing the electrical connection between the joystick and associated components in a marine control system. It supports communication and functional interfacing required for bow thruster control and is supplied as a spare part for Vetus marine thruster systems.
|
$ 19.15
-
+
| ||
|
1-2 weeks delivery time The Vetus BP22473 flexible coupling unit is specified for BOWH550 models in Vetus marine thruster systems. It is intended to provide smooth power transmission while reducing strain on connected drivetrain components within the thruster installation.
|
$ 315.88
-
+
| ||
|
1-2 weeks delivery time The Vetus BP225 adjustable sleeve component is specified for a 40 mm diameter and is supplied as a spare part for Vetus marine thruster systems, referenced for BOW80 applications. This sleeve is intended to provide an adjustable, secure fit for installation where a 40 mm sleeve interface is required.
|
$ 29.67
-
+
| ||
|
1-2 weeks delivery time The Vetus BP226 shear-pin safety component is intended for clutch coupling service in BOW80 applications and is supplied as a spare part for Vetus marine thruster systems. It is specified for use with the BP225 bushing and in conjunction with the BP228 shear pin to provide a protective mechanism against excessive stress and potential damage in the clutch assembly.
|
$ 22.01
-
+
| ||
|
1-2 weeks delivery time The Vetus BP22814 flexible coupling assembly is intended for BOWH410 bow thruster models and provides a connection interface between moving parts to support reliable power transmission. Supplied as a spare part for Vetus marine thruster systems, it is specified as a flexible coupling for BOWH410 applications and is described as improving overall thruster efficiency.
|
$ 306.30
-
+
| ||
|
1-2 weeks delivery time The Vetus BP228S shear-pin set is a replacement safety pin kit for the Vetus BOW80 bow thruster (80 kgf), supplied as a pack of 5 pieces. Each pin is manufactured from brass and measures 4 x 39.5 mm, providing overload protection for the thruster drive as part of Vetus marine thruster system spare parts.
|
$ 38.16
-
+
| ||
|
1-2 weeks delivery time The Vetus BP22970 tailpiece gasket component is a 2 mm thick sealing element intended for 400 mm tunnel systems in Vetus marine thruster installations. It is specified to provide a secure seal to help prevent leaks, supporting system efficiency and operational reliability.
|
$ 40.21
-
+
| ||
|
1-2 weeks delivery time The Vetus BP23 complete oil tank assembly is an oil storage component intended to maintain hydraulic fluid levels in marine hydraulic systems. It is specified for Bowprop applications and for MT65/80 steering, and is supplied as a complete oil tank within the Vetus marine thruster system spare parts category.
|
$ 81.84
-
+
| ||
|
1-2 weeks delivery time The Vetus BP230 relay protective cover is intended for the relays fitted to Vetus Bow80 and Bow130 steering devices manufactured from January 1, 1997 onwards. It functions as a protective barrier against environmental elements to support relay safety and service life, and is supplied as a spare part for Vetus marine thruster systems.
|
$ 38.29
-
+
| ||
|
1-2 weeks delivery time The Vetus BP232 connection strip set is an electrical connection component intended for the Vetus BOW 80 bow thruster system, providing reliable and secure connectivity to support stable power delivery. The set is specified with compact dimensions of 207 x 52 x 30 mm (H x W x D), a net weight of 0.16 kg, and corrosion-resistant, high-conductivity materials for use in harsh marine environments; it is stated as suitable for both 12V and 24V systems.
|
$ 22.97
-
+
| ||
|
1-2 weeks delivery time The Vetus BP233 carbon brush set is an 8-piece replacement kit specified as 10x25x32 and intended for Vetus bow thruster motor service on BOW13024 and BOW16024 units (BOW130/160 series). It is supplied as a spare part for Vetus marine thruster systems to support continued bow thruster motor operation.
|
$ 727.47
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.