Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus VSDR22140 thrust bearing component (Type 2) is specified for Vetus CV21 systems using a 40mm rod diameter. Supplied as a spare part for Vetus stern gear systems, it is intended to provide consistent performance in mechanical applications where this CV21/40mm configuration is required.
|
$ 1,931.62
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR42140 thrust bearing assembly is a Type 4 unit specified for CV21 stern gear systems using a 40mm rod diameter. Listed under spare parts for Vetus stern gear systems, it is identified in the provided data as offering strength and reliability for demanding environments.
|
$ 3,034.30
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR42145 thrust bearing assembly is a Type 4 bearing specified for CV21 stern gear applications using a 45mm rod diameter. It is intended to operate under high-load conditions, supporting durability and strength as part of Vetus stern gear system spare parts.
|
$ 3,034.30
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR42150 thrust bearing assembly is a Type 4 component specified for CV21 stern gear applications with a 50mm rod diameter. It is supplied as a spare part for Vetus stern gear systems and is described for heavy-duty CV21 installations.
|
$ 3,034.30
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR43040 thrust bearing assembly is a Type 4 unit specified for CV30 stern gear systems using a 40 mm rod diameter. Listed as a spare part for Vetus stern gear systems, it is intended to support smooth mechanical operation within the compatible CV30 installation.
|
$ 3,034.30
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR43045 thrust bearing assembly is a Type 4 unit specified for CV30 applications and configured for a 45 mm rod diameter. Listed under spare parts for Vetus stern gear systems, this component is intended to withstand demanding operating conditions while providing thrust bearing functionality within the CV30 setup.
|
$ 3,350.18
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR43050 thrust bearing assembly is a Type 4 unit intended for Vetus CV30 stern gear systems and specified for a 50 mm rod diameter. It is supplied as a spare part for Vetus stern gear systems and is described as suitable for operation under heavy loads while maintaining efficiency and longevity.
|
$ 4,211.65
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR63050 thrust bearing assembly is a Type 6 bearing specified for CV30 systems and a 50 mm rod diameter. Supplied as a spare part for Vetus stern gear systems, it is described as an advanced-design bearing intended to operate under extreme load conditions.
|
$ 8,614.73
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR63060 thrust bearing assembly is a Type 6 load-bearing component intended for Vetus CV 30 stern gear systems and 60 mm rod installations. It is specified for efficient thrust load handling and durability in marine applications and is supplied within the spare parts range for Vetus stern gear systems.
|
$ 8,614.73
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR63070 thrust bearing assembly is a Type 6 bearing specified for Vetus CV 30 stern gear systems using a 70mm rod. It is intended to provide smooth operation and load management in demanding marine conditions and is supplied within the Spare Parts for Vetus Stern Gear Systems category.
|
$ 8,614.73
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR64250 thrust bearing unit is a Type 6 bearing specified for CV 42 systems and 50 mm rods, supplied as a spare part for Vetus stern gear installations. It is intended to provide thrust support for marine equipment operating in marine conditions.
|
$ 13,400.69
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR64260 thrust bearing unit is a Type 6 load-support component specified for Vetus CV 42 stern gear systems and engineered for use with 60 mm rods. It is supplied as a spare part for Vetus stern gear installations, providing thrust load management for marine propulsion driveline arrangements.
|
$ 13,400.69
-
+
| ||
|
1-2 weeks delivery time The Vetus VSDR64270 thrust bearing assembly is a Type 6 bearing specified for CV 42 systems and a 70 mm rod diameter. Supplied as a spare part for Vetus stern gear systems, it is intended for installations requiring a thrust bearing matched to CV 42 hardware and 70 mm rod arrangements.
|
$ 13,400.69
-
+
| ||
|
1-2 weeks delivery time The Vetus ZWB25ISET dual lip seal cartridge set is a replacement sealing assembly for the Vetus ZWB25 and ZWB25A Flexible Inner Bearing on 25 mm propeller shaft installations. The spare set is supplied with a complete front lip seal housing, a gasket, and a 15 g tube of Silicon Grease for installation and service.
|
$ 155.07
-
+
| ||
|
1-2 weeks delivery time The Vetus ZWB30ISET seal set is a 30 mm replacement lip seal cartridge intended for Vetus ZWB30 and ZWB30A flexible inner bearing installations in stern gear systems. Supplied as a dual lip seal cartridge, it includes a complete front lip seal housing, a gasket, and a 15 g tube of Silicon Grease to support straightforward seal replacement and ongoing bearing system operation.
|
$ 174.21
-
+
| ||
|
Vetus ZWB35RESA - Spare Set 35mm DLS Double Lip Seal III for ZWB35 and ZWB35A Flexible Inner Bearing
1-2 weeks delivery time The Vetus ZWB35RESA double lip seal spare set is a replacement dual lip seal cartridge (DLS Double Lip Seal III) intended for Vetus ZWB35 and ZWB35A Flexible Inner Bearing installations. Supplied as a complete front lip seal housing, it includes an O-ring and a 15 g Silicon Grease tube to support installation and service of Vetus stern gear system components.
|
$ 186.66
-
+
| ||
|
1-2 weeks delivery time The Vetus ZWB40RESA double lip seal spare set is a 40mm DLS Double Lip Seal III replacement intended for the ZWB40 flexible inner bearing. It uses a dual lip seal arrangement for increased protection against leaks, with the front seal chamber packed with silicon grease. The set is designed for Vetus 40mm stern tubes manufactured in bronze, GRP, or steel.
|
$ 196.22
-
+
| ||
|
1-2 weeks delivery time The Vetus ZWB45RESA replacement double lip seal set is a spare sealing component engineered for the Vetus ZWB45 shaft seal and specified for 45 mm stern tubes in Bronze, GRP, or Steel. It incorporates a flexible inner bearing with a dual lip geometry for leak protection, and the front seal chamber is supplied packed with silicon grease; raw water supply is managed via a dedicated water scoop or a branch feed from the engine exhaust cooling circuit, ideally routed up to an AIRVENT anti-syphon device.
|
$ 205.79
-
+
| ||
|
1-2 weeks delivery time The Vetus ZWB50RESA dual lip seal replacement set is a 50 mm seal cartridge intended as a replacement for the Vetus ZWB50 shaft seal, providing a double-lip arrangement for additional leak security. It is specified for 50 mm Bronze, GRP, or Steel stern tubes and is stated as compatible with the Vetus ZWB50 and the ZWB50A flexible inner bearing. The front seal chamber is supplied pre-packed with silicon grease, and the kit is supplied with a complete front lip seal housing, an O-ring, and a 15 g silicon grease tube for stern gear service.
|
$ 215.37
-
+
| ||
|
1-2 weeks delivery time The Vetus ZWB60RES seal cartridge set is a replacement dual lip seal solution for the Vetus ZWB60 Flexible Inner Bearing (60 mm). Supplied as a complete front lip seal housing, it includes a gasket and a 15 g tube of silicon grease to support service replacement and maintain the integrity of the ZWB60 bearing system.
|
$ 363.74
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.