Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970302810 rear end plate is a flywheel-assembly component designed to support secure mounting and stable alignment at the rear end of the engine’s rotating group. Used on 3.100HE, 4.150HE, N3.30, and N4.38 engines, it helps maintain proper flywheel installation for smooth power transfer to the drivetrain.
|
$ 468.95
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302811 pipe clamp is a securing element used within the cylinder head cover assembly on 4.150HE engines. It helps keep the connected pipe firmly retained, reducing the risk of vibration-related movement and supporting a clean, orderly engine installation in demanding marine service.
|
$ 8.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302817 fuel injection line for cylinder 1 routes high-pressure fuel from the injection system to the injector with a secure, leak-resistant connection. Installed within the injection nozzles and pipes assembly, it supports accurate fuel delivery and consistent combustion on 3.100HE, 4.150HE, and N4.38 engines for units up to engine number KT08090422.
|
$ 210.56
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302818 fuel injection line for cylinder No. 2 is a precision high-pressure pipe used within the injection nozzles and pipes assembly. Designed to route metered fuel from the injection system to injector cylinder No. 2, it supports consistent spray delivery and dependable combustion on Nanni 3.100HE, 4.150HE, and N4.38 engines for units up to serial number KT08090422.
|
$ 202.35
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302819 fuel injection line for cylinder 3 is a precision pipe used within the injection nozzles and pipes assembly to route high-pressure fuel to the injector. Designed for Nanni Diesel 3.100HE and 4.150HE engines, it is also specified for N4.38 engines up to serial number KT08090422, helping maintain stable injection delivery and dependable combustion under marine operating loads.
|
$ 187.04
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302820 fuel injection line for cylinder 4 is a precision high-pressure pipe used within the injection nozzles and injection line system to route metered fuel from the injection system to the injector. Designed for correct fit and secure sealing on 4.150HE and N4.38 engines, it supports stable injection performance and dependable running under marine duty cycles.
|
$ 188.34
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302822 glow plug line assembly is a complete connecting line used within the injection nozzles and pipes group, helping route and secure the glow plug feed neatly alongside the engine’s injection line layout. Designed as an OEM-fit replacement for Nanni Diesel marine engines, it suits both 4.150HE and N4.38 engines for dependable cold-start support and clean, service-friendly installation.
|
$ 55.71
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302825 injector nozzle adjusting spacer (standard 0.900) is a precision shim used within the nozzle holder and injection nozzle assemblies to set correct injector stack adjustment. Installed in the injection nozzle system, it helps maintain consistent injector setup for dependable fuel delivery on 2.45HE, 2.50HE, 3.75HE, 4.150HE, 4.200HE, 4.220HE, 5.280HE, N2.14, N3.21, and N3.21 Standard engines.
|
$ 5.98
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302826 injector nozzle washer is a precision sealing and seating element used within the injection nozzle and nozzle holder assemblies on a wide range of Nanni Diesel marine engines. Installed as part of the injector hardware stack, it supports correct nozzle seating and helps maintain a tight seal at the injector interface for clean, reliable fuel injection on 2.40HE, 2.45HE, 2.50HE, 3.75HE, 4.150HE, 4.200HE, 4.220HE, 5.280HE, N2.14, N3.21, N3.21 Standard, and N4.65 engines.
|
$ 8.03
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302829 injection pump spacing shim (0.200 mm) is a precision adjustment element used within the injection and feed pump assembly to help set correct pump positioning and calibration. Designed for dependable OEM fit during service work on 4.150HE and N4.38 engines, it supports stable fuel delivery and consistent engine performance.
|
$ 19.22
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302830 injection pump shim is a precision spacing element used within the injection and feed pump assembly to help set correct pump positioning and calibration. With a 0.250 mm thickness, it supports accurate fuel metering and stable running by maintaining the intended pump setup on 4.150HE and N4.38 marine diesel engines.
|
$ 26.40
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302832 cylinder head cover is a dedicated top-end component that closes and protects the cylinder head cover assembly on 3.100HE engines. Designed for correct OEM fit, it helps keep the valvetrain area shielded while supporting clean, controlled operation of the engine’s upper section in marine service.
|
$ 822.87
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302833 cylinder head cover sealing gasket keeps the valve cover joint tight to help control oil containment and protect the top-end of the engine. Used within the cylinder head cover assembly and also included in the maintenance kit, it is a direct-fit replacement for Nanni 3.100HE and N3.30 engines.
|
$ 55.84
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302835 injection-pump camshaft case bearing is a precision support element used within the camshaft injection pump assembly to keep the camshaft properly supported and rotating smoothly. Designed for 3.100HE and 4.150HE engines, it helps maintain stable camshaft alignment in the injection pump drive, promoting consistent operation and dependable service life in marine duty.
|
$ 68.57
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302836 camshaft case bearing supports smooth, accurate rotation within the injection pump camshaft assembly, helping maintain stable fuel delivery timing under marine operating loads. Designed as an OEM replacement part for the injection pump camshaft system, it fits Nanni 3.100HE and 4.150HE engines for dependable service and precise component alignment.
|
$ 58.23
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302837 complete timing device supports accurate injection pump timing on 4.150HE engines. Installed within the camshaft injection pump assembly, this component helps keep injection events synchronized with engine rotation, promoting smooth running and dependable marine diesel performance when replacing worn or damaged timing hardware.
|
$ 4,266.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302838 injection pump drive gear supports precise fuel injection timing by transmitting motion within the camshaft injection pump assembly. Built as an OEM replacement component for 4.150HE engines, it helps keep the injection system synchronized with engine speed for stable starting, smooth running, and dependable power delivery on board.
|
$ 811.77
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302839 cap nut is a secure, OEM-style fastener used in the injection pump camshaft and related fuel-camshaft assemblies to maintain correct retention of fitted components under engine vibration. Specified across multiple Nanni marine diesel applications, it supports dependable fuel system drive and control hardware fastening on 3.100HE, 4.150HE, N3.30, N4.115, and N4.38 engines, including governor-related installation points where applicable.
|
$ 18.94
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302840 feather key is a precision drive key used in the camshaft injection pump assembly to lock and index rotating components for secure torque transfer. Designed for dependable fit in Nanni Diesel applications, it supports accurate mechanical timing and robust camshaft-to-drive engagement on 3.100HE, 4.150HE, N3.30, and N4.38 engines.
|
$ 9.90
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970302841 fuel camshaft stopper is a precision retention element used within the injection pump camshaft and fuel camshaft assemblies to help keep camshaft components securely positioned during operation. Designed for dependable OEM fit on Nanni marine diesel engines, it supports stable fuel system timing and smooth running on 3.100HE, 4.150HE, N3.30, and N4.38 engines.
|
$ 24.72
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.