Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970301492 crankshaft nut is a critical fastening element within the crankshaft and pistons assembly, helping secure key rotating components on Nanni marine diesel engines. Built for dependable retention under vibration and load, it supports proper crankshaft-side clamping on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 38.87
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301493 crankshaft washer is a precision engine fastener element used within the crankshaft and pistons assembly to support correct clamping and load distribution on the crankshaft connection points. Built for dependable service in marine duty cycles, it helps maintain secure hardware fitment and stable rotating-assembly alignment on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 12.48
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301496 M7 nut is a compact fastening element used in the heat exchanger assembly to keep critical cooling-system components securely clamped under vibration and thermal cycling. Designed for a proper OEM fit, it supports reliable service work and correct reassembly on Nanni 3.100HE and 4.150HE engines.
|
$ 0.66
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301517 oil pan cover is a dedicated sump cover component for the oil sump and oil pump assembly on 4.110HE engines. Designed to close and protect the lower crankcase area, it supports clean oil circulation by helping keep the lubrication system properly enclosed for dependable marine operation.
|
$ 39.60
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301518 washer is a precision engine fastener element used within the valves and springs assembly to support correct clamping and spacing of valvetrain components. Designed for 4.110HE engines, it helps maintain stable valve gear operation under vibration and thermal cycling in demanding marine service.
|
$ 10.81
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301581 M8x110 stud is a threaded fastening element used in the air filter assembly to secure mounting points and keep the intake filtration hardware firmly clamped under engine vibration. Designed for OEM fit on Nanni Diesel 4.190HE, 4.195HE, 4.200HE, 4.220HE, and 5.280HE engines, it supports a stable, leak-resistant air intake installation for dependable marine operation.
|
$ 8.90
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301583 M10x40 hex head fastener is designed for secure mounting in the flywheel housing, supporting reliable attachment of the gearbox interface hardware. It is a direct-fit replacement for Nanni Diesel marine engines including T4.155, 4.380TDI, T4.155 Stern Drive, 4.380TDI Stern Drive, T4.165, T4.180, and T4.200 applications.
|
$ 1.29
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301604 hose clamp 15-24 is a compact fastening element designed to secure flexible hoses in key onboard engine circuits. Used across multiple assemblies including the turbocharger and exhaust mixer, heat exchanger, fuel and oil cooler, cylinder head cover, oil separator assembly, and gearbox oil cooler, it helps maintain tight, vibration-resistant hose joints on engines such as 4.330TDI, 4.340TDI, 4.390TDI Stern Drive, 5.250TDI, N3.30, N4.115, N4.38, T4.155, 4.380TDI, and the T4/T6 series applications listed.
|
$ 4.18
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301612 air filter hose is an intake air duct component that connects the air filter to the intake manifold, promoting clean, stable airflow to the engine. Used within the intake manifold assembly on Nanni 3.90HE and 4.110HE engines, it supports consistent air delivery for dependable combustion and smooth engine operation in marine conditions.
|
$ 22.94
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301626 rear end plate is a rigid closing and support element used at the rear of the engine in the flywheel area and, on certain builds, within the camshaft injection pump assembly. Designed for reliable OEM-style fit, it helps protect internal components and maintain correct alignment around the flywheel interface on 4.190HE, 4.195HE, 4.200TD, N4.40, N4.50, N4.60, and N4.65 engines.
|
$ 1,583.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301627 complete flywheel unit is a key rotating component used within the flywheel assembly on a wide range of Nanni marine diesel engines. It helps stabilize crankshaft rotation and provides the inertia needed for smooth starting and steady running, and it is also referenced within the camshaft injection pump assembly grouping on 4.200TD and N4.60 engines. This flywheel fits 4.190HE, 4.195HE, 4.200HE, 4.200TD, 4.220HE, N4.40, N4.50, N4.60, and N4.65 engines.
|
$ 5,386.96
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301662 VDO temperature and voltage gauge is an instrument-panel gauge that helps you monitor key engine operating conditions at a glance. Installed as part of the instrument panels assembly, this Temp/Volt 40-120, 8-1 gauge supports dependable helm-side supervision on 2.60HE, 3.90HE, 4.110HE, 4.150HE, 4.190HE, 4.220HE, and 5.280HE engines.
|
$ 275.98
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301671 sea water pump gasket is a sealing element used within the sea water pump details assembly to keep the raw-water circuit tight and dependable. Designed for OEM-style fit, it supports leak-free pump servicing on 4.220HE, 5.280HE, and N4.50 marine diesel engines, helping maintain stable cooling-water flow and protecting the pump-to-housing mating surfaces.
|
$ 7.65
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301673 sea water pump cover is a replacement closing element for the sea water pump assembly, helping maintain proper pump sealing and stable raw-water flow through the engine cooling circuit. Designed for marine duty, it fits Nanni 4.220HE, 5.280HE, and N4.50 engines, making it a practical choice when servicing sea water pump details to keep cooling performance dependable underway.
|
$ 260.26
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301676 sea water pump cam screw is a dedicated fastener used in the sea water pump details assembly to secure the cam inside the pump body for consistent impeller operation. Built for OEM-style fit and reliable retention in a wet, vibration-prone environment, it suits Nanni 4.220HE, 5.280HE, and N4.50 engines where dependable raw-water circulation is essential for engine cooling.
|
$ 51.76
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301677 sea water pump wear plate is a protective internal element fitted in the sea water pump details assembly, providing a durable running surface that helps the pump maintain stable flow and efficiency as the impeller rotates. Designed for OEM-style fit on Nanni marine diesels, it suits 4.220HE, 5.280HE, and N4.50 engines where dependable raw-water circulation is essential for engine cooling.
|
$ 130.33
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301700 alternator carbon brush holder assembly supports stable current transfer within the alternator system, helping maintain consistent charging performance underway. Used as part of the alternator assembly on Nanni 2.40HE and 2.60HE engines, it positions the carbon brushes correctly against the rotating slip rings to promote reliable electrical contact and reduced charging interruptions.
|
$ 17.10
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301703 M8x160 hex head bolt is a marine-grade fastening element used within the heat exchanger, air cooler, and intercooler assemblies on multiple Nanni Diesel engines. It helps securely clamp key cooling-system components to maintain tight joints and stable alignment under vibration and thermal cycling, supporting dependable operation on 4.190HE, 4.195HE, 4.200HE, 4.220HE, 4.330TDI, 4.340TDI, 5.250TDI, 5.280HE, and N4.115 engines.
|
$ 4.98
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301722 V-belt tensioner support is a mounting component used within the alternator assembly to help position and stabilize the belt tensioning hardware for consistent drive-belt tracking. Designed for 4.190HE engines, it supports reliable alternator belt adjustment so charging performance stays steady under marine operating loads.
|
$ 20.07
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970301736 hex head fastening bolt (M12 x 1.25 x 30) is a secure, OEM-style fixings solution used across several installation points including fixed supports, support and mounting hardware, gearbox flange connections, engine mount assemblies, and the flywheel housing. Designed for dependable clamping in vibration-prone marine environments, it fits a wide range of Nanni engines such as 4.190HE, 4.195HE, 4.200HE, 4.220HE, 4.330TDI, 4.340TDI, 5.250TDI, 5.280HE, N4.115, and T6 series applications.
|
$ 2.70
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.