Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970140123 M6x12 fastening bolt is a compact metric fastener used across several critical engine groups, including the camshaft, injection and feed pump, oil sump and oil pump, oil pan, fresh water pump, camshaft injection pump drive, and governor or speed regulator assemblies. Designed for consistent OEM fit, it supports secure clamping and stable alignment on a wide range of Nanni Diesel engines such as 2.40HE, 2.45HE, 2.50HE, 2.60HE, 3.100HE, 3.75HE, 3.90HE, 4.110HE, 4.150HE, N2.14, N3.21, N3.21 Standard, N3.30, and N4.38.
|
$ 2.73
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140140 engine oil level dipstick provides a quick, accurate way to verify crankcase oil level during routine checks. Installed in the engine block assembly on 2.40HE engines, it helps support dependable lubrication management and makes pre-start inspections faster and more consistent on board.
|
$ 137.90
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140201 timing cover is a protective engine casing element used in the timing gear case on 2.40HE engines. It helps enclose and shield the timing gear area, supporting clean, secure operation by keeping internal components protected and maintaining proper closure of the timing gear case during service and normal running.
|
$ 1,678.28
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140202 socket plug is a timing case closure element used in the timing gear case assembly to help seal and protect service or access points around the engine timing gear area. Designed for OEM-style fit on a wide range of Nanni marine diesel models, it supports clean, secure timing case integrity across 2.40HE, 2.45HE, 2.50HE, 3.75HE, 4.190HE, 4.195HE, 4.200HE, 4.220HE, 5.280HE, N4.40, and N4.50 engines.
|
$ 8.84
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140204 timing cover locating pin is a precision alignment element used within the timing gear case and timing case assemblies. It helps position and retain the timing cover correctly so mating surfaces stay aligned during operation and service work, supporting dependable timing-case sealing and component fit on 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, N3.21, and N3.21 Standard engines.
|
$ 8.99
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140208 timing gear case fastening bolt is a secure-fit fastener used within the timing gear case assembly to keep the timing case components firmly clamped and correctly aligned. Built for OEM replacement needs on Nanni marine diesel engines, it fits 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, N3.21, and N3.21 Standard engines to help maintain dependable timing case retention under vibration and thermal cycling.
|
$ 5.07
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140211 plain washer is a precision flat fastener used within the oil filter assembly to support secure clamping and dependable sealing at the filter mounting points. Designed as an OEM replacement for Nanni diesel service work, it fits 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, N3.21, and N3.21 Standard engines to help maintain a stable, leak-resistant oil filtration installation.
|
$ 3.69
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140216 oil filter spring is a small but critical element within the oil filter assembly that helps maintain correct internal loading and positioning of oil filter components during operation. Designed for a precise OEM-style fit, it supports stable oil filtration performance on 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, and N3.21 Standard engines in demanding marine duty cycles.
|
$ 6.26
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140217 oil filter seat is a locating and sealing element within the oil filter assembly, helping the filter components sit correctly for stable oil flow and dependable filtration. Designed for Nanni Diesel marine engines, it fits 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, N3.21, and N3.21 Standard engines as part of the oil filter system.
|
$ 30.22
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140218 ball bearing element is a precision component used within the oil filter assembly to support smooth internal movement and dependable oil-circuit control. Designed for OEM fit in Nanni marine diesel systems, it suits a wide range of engines including 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, N3.21, and N3.21 Standard models.
|
$ 1.38
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140302 breather element housing supports clean and controlled crankcase ventilation within the cylinder head cover assembly. Designed for dependable OEM fit, this housing secures the breather element in place to help manage oil mist and blow-by routing on 2.40HE, 2.45HE, 2.50HE, and 3.75HE engines.
|
$ 11.85
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140303 breather element plate is a cylinder head cover component that supports controlled crankcase ventilation within the breather system. Designed as an OEM-fit replacement, it helps keep blow-by gases routed correctly and supports a clean, stable engine-breathing circuit on 2.40HE, 2.45HE, 2.50HE, and 3.75HE engines.
|
$ 19.03
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140306 oil breather shield is a protective element fitted within the cylinder head cover assembly to help manage oil mist around the breather area and keep the top of the engine cleaner. Designed as an OEM replacement part for 2.40HE, 2.45HE, 2.50HE, and 3.75HE engines, it supports reliable crankcase ventilation routing while reducing oil carryover in the cylinder head cover zone.
|
$ 7.74
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140308 breather pipe is a crankcase ventilation element used within the cylinder head cover assembly on 2.40HE engines. It supports controlled routing of blow-by vapors away from the top end, helping keep the engine breathing system working cleanly and consistently for reliable marine operation.
|
$ 15.44
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140401 regulator adjustment screw is a precision fastener used to set and secure control adjustment points within the accelerator and governor systems. Fitted in the accelerator assembly on 2.40HE, 2.50HE, 3.75HE, and N2.14 engines, and in the governor assembly on 2.45HE engines, it also supports throttle control adjustment on N3.21 Standard engines for stable, repeatable engine response.
|
$ 26.25
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140402 fastening nut is used in accelerator, speed control, and regulator adjustment assemblies to secure linkage hardware and help maintain stable throttle and governing settings under marine engine vibration. It fits a wide range of Nanni Diesel engines including 2.40HE, 4.150HE, 4.190HE, 4.195HE, 4.200HE, 4.200TD, 4.220HE, 5.250TDI, 5.280HE, N4.40, N4.50, N4.60, and N4.65 models.
|
$ 36.87
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140404 control-linkage nut is a fastening element used across throttle and speed-governing mechanisms to keep adjustments secure and components locked in position. Installed within assemblies such as the accelerator, governor, regulator adjustment, speed regulator, speed control, and governor setting, it supports stable engine control on 2.40HE, 2.45HE, 2.50HE, 3.75HE, 3.100HE, 4.150HE, 4.330TDI, 4.340TDI, N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines, including versions specified for use before No. KTE08070398 on selected models.
|
$ 8.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140504 M8 cap nut is a protective fastening element used in the cylinder head cover and speed control accelerator assemblies to secure components while helping shield exposed threads in the engine bay. This OEM-fit nut supports dependable retention on a wide range of Nanni engines including 2.40HE, 2.45HE, 2.50HE, 2.60HE, 3.75HE, 3.90HE, 4.110HE, 4.190HE, 4.195HE, 4.200HE, 4.200TD, 4.220HE, 5.250TDI, 5.280HE, N4.40, N4.50, and N4.60.
|
$ 20.08
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140901 engine lifting hook is a dedicated lifting attachment used on the cylinder head and exhaust elbow assemblies to support safer handling during installation and maintenance. Designed for Nanni marine diesel applications, it fits 2.40HE, 2.45HE, 2.50HE, 3.75HE, N2.14, N3.21, and N3.21 Standard engines, providing a dependable OEM replacement when servicing engine lifting points.
|
$ 16
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970140904 freeze plug cap is a core plug element used in the cylinder head and, on selected models, the engine block and cylinder group to close casting passages and help maintain a tight coolant jacket. Designed as an OEM replacement, it supports dependable cooling-system integrity across 2.40HE, 2.45HE, 2.50HE, 3.75HE, 4.150HE, N2.14, N3.21, N3.21 Standard, N3.30, N4.38, N4.85, and N4.100 engines.
|
$ 18.08
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.