Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970150121 engine oil pan is the lower sump component that supports safe oil storage and return in the lubrication circuit. Used within the engine block area and referenced in the oil sump and oil pump assembly on 2.60HE engines, it helps keep the oil supply contained and correctly positioned for reliable pickup during marine operation.
|
$ 755.88
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150401 accelerator adjusting screw is a precision adjustment fastener used in the accelerator assembly to fine-tune throttle actuation and help maintain stable, repeatable engine response. Designed for an OEM-style fit on Nanni Diesel HE series applications, it supports correct accelerator linkage setup on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 14.16
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150402 accelerator fastener nut is a secure, OEM-style replacement used in the accelerator assembly to keep throttle linkage hardware tight and correctly retained under vibration. Designed for dependable fitment on Nanni 2.60HE, 3.90HE, and 4.110HE engines, it helps maintain consistent throttle control and reliable engine response on board.
|
$ 2.63
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150905 complete cylinder head assembly is a ready-to-install top-end component for 2.60HE engines. Supplied as part of the cylinder head system, it forms the combustion-chamber roof and supports correct gas flow and sealing at the head-to-block interface, making it a strong choice for dependable marine engine rebuilds and repairs.
|
$ 6,264.33
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150912 cylinder head bolt is a critical fastener in the cylinder head assembly, designed to clamp the cylinder head securely to the engine block for stable sealing and consistent compression. Built for OEM-fit replacement on Nanni 2.60HE, 3.90HE, and 4.110HE marine diesel engines, it supports dependable service under the heat and vibration typical of marine operation.
|
$ 43.22
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150913 cylinder head stud is a critical fastening element in the cylinder head assembly, designed to clamp the head securely to the engine block for stable sealing under marine-duty loads. Built for an OEM-correct fit, it supports reliable cylinder head retention on Nanni Diesel 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 191.72
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150914 cylinder head fastening nut is a critical fastener used in the cylinder head assembly to secure the cylinder head onto the engine block with stable, even clamping force. Designed for OEM fit on Nanni HE series marine diesel engines, it supports reliable head retention and helps maintain sealing integrity on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 20.61
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150916 cylinder head gasket is a precision sealing element for the 2.60HE cylinder head assembly, helping maintain stable compression and controlled fluid separation at the head-to-block joint. Designed for 2.60HE engines, it supports dependable combustion sealing and clean coolant and oil passages for reliable marine operation.
|
$ 299.35
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150917 cylinder head shim is a precision spacing element used within the cylinder head assembly to support correct cylinder head fitment and alignment during service work. Designed for 2.60HE engines, this OEM-style shim helps maintain consistent mating conditions in the cylinder head stack-up for dependable marine diesel operation.
|
$ 45.71
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970150919 sealing washer is a dedicated sealing element used in the cylinder head assembly to help prevent fluid seepage at fitted connections and maintain a tight, reliable joint. Designed for OEM-correct replacement, it supports consistent engine integrity on Nanni Diesel 2.60HE, 3.90HE, 4.110HE, and 4.190HE engines in demanding marine service.
|
$ 6.74
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151001 intake valve is a precision valve train element built to control fresh-air intake into the combustion chamber for efficient cylinder filling and stable running. Supplied for the valves and springs assembly, it is the correct OEM replacement for Nanni Diesel 2.60HE and 3.90HE engines, supporting dependable sealing and consistent engine breathing under marine duty cycles.
|
$ 105.47
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151019 rocker arm valve-train assembly ensures accurate valve actuation and stable operation within the valves and springs system. Designed as a direct-fit replacement, it transmits cam-driven motion to the valves for consistent timing and smooth running on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 216.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151128 injection pump cover is a precision-fit cover element used within the camshaft assembly to protect and close off the injection pump interface area. Designed for dependable OEM replacement on 2.60HE, 3.90HE, and 4.110HE engines, it helps maintain proper enclosure and cleanliness around critical timing and fuel-injection drive components in marine-duty operation.
|
$ 642.35
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151129 O-ring sealing element is built to maintain tight, leak-resistant joints within both the accelerator and camshaft assemblies on Nanni marine diesel engines. Used across the 2.60HE, 3.90HE, and 4.110HE engine ranges, this OEM replacement seal helps preserve stable operation by supporting proper containment where these assemblies interface with adjoining components.
|
$ 4.11
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151131 injection pump spring is a precision spring element used within the camshaft assembly and regulator adjustment system on selected Nanni HE marine diesel engines. It supports consistent injection pump actuation and control response, helping maintain stable engine operation on 2.60HE, 3.90HE, 4.110HE, and 4.190HE engines.
|
$ 6.65
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151310 M6 nut is a compact fastening element used in the accelerator assembly to securely clamp linked hardware and maintain stable throttle control. Built for correct OEM fit on Nanni Diesel 2.60HE, 3.90HE, and 4.110HE engines, it supports dependable retention in a vibration-prone marine engine environment.
|
$ 0.86
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151311 governor spacer is a precision spacing element used within the accelerator assembly to support correct governor linkage geometry and smooth throttle response. Designed as an OEM replacement part for Nanni marine diesel installations, it helps maintain consistent control feel and reliable engine speed regulation on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 68.76
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151312 speed control cover is a protective component for the accelerator assembly, helping shield the speed control mechanism from routine handling and the marine engine-room environment. Designed for OEM fit on Nanni Diesel 2.60HE, 3.90HE, and 4.110HE engines, it supports smooth, reliable throttle control by keeping the accelerator system properly protected and organized.
|
$ 184.55
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151314 governor spring supports stable throttle response in the accelerator system on Nanni 2.60HE engines. Designed to work within the governor control mechanism, this spring helps maintain consistent engine speed regulation under varying load conditions, making it a smart OEM replacement choice for reliable propulsion performance.
|
$ 35.19
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970151315 governor spring is a precision control element used in the accelerator assembly to help regulate engine speed response. Designed for 2.60HE engines, it supports smooth throttle operation by maintaining consistent governor action under changing load conditions, making it an ideal OEM replacement for dependable RPM control.
|
$ 33.66
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.