Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970850404 starter switch is a dedicated panel-mounted control element for Nanni instrument panels, providing dependable start-command operation from the helm. Built to match the original instrument panel assembly layout, it supports reliable engine starting control on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 316.64
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970850570 warning light is a dedicated indicator element for Nanni Diesel instrument panels, helping the operator spot key engine alerts at a glance. Designed for the instrument panel assembly on 2.60HE and 3.90HE engines, it supports clear, immediate status indication for safer monitoring underway.
|
$ 17.61
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970850571 warning light is an instrument-panel indicator element designed for clear status and alarm signaling at the helm. Installed within the instrument panels assembly, it supports quick operator awareness on Nanni 2.60HE and 3.90HE engines, helping you monitor engine operating conditions during start-up and underway.
|
$ 17.03
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970851515 instrument panel wiring harness supports clean, dependable electrical connections within the instrument panels system on Nanni marine diesel installations. Built as an OEM replacement wiring component, it helps maintain accurate panel power distribution and signal continuity for 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 61.24
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970851606 water temperature sender is a 120C, 2-pin sensor used in the electrical system to monitor engine coolant temperature for dependable gauge and alarm operation. Supplied for the electrics and electrical equipment assemblies, it fits Nanni Diesel N4.115 24V and N4.65 engines and helps protect the engine by supporting accurate overtemperature detection.
|
$ 140.51
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970875102 fuel filter element is a service replacement component used in the fuel filter assembly and included within the maintenance kit on selected HE series engines. Designed to help keep the fuel supply clean and protect downstream injection components, it supports dependable running and easier routine servicing on 2.60HE, 3.90HE, 4.110HE, and 4.190HE engines.
|
$ 21.91
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970892503 elbow fitting supports secure hose or pipe routing within key engine circuits, appearing in both the oil cooler assembly and the exhaust elbow system depending on engine model. Used on 4.340TDI engines as part of the oil cooler, and on N3.30 and N4.38 engines within the exhaust elbow assembly, it helps maintain clean, properly directed flow for dependable marine engine operation.
|
$ 15.51
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970892604 exhaust elbow is a dedicated exhaust-routing component used within the exhaust elbow assembly on T4.165, T4.180, and T4.200 marine engines. Built for correct fit and alignment, it guides exhaust flow out of the engine and helps maintain a secure, reliable connection within the exhaust system during operation.
|
$ 50.51
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970896520 mounting nut is a dedicated fastener used within the support and mounting system of selected Nanni marine diesel engines. Installed as part of the engine mount assembly, it helps secure mounting hardware so the engine remains properly supported and aligned on 4.190HE, 4.195HE, 4.200HE, 4.220HE, 4.330TDI, 4.340TDI, 5.250TDI, 5.280HE, and N4.115 engines.
|
$ 0.72
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel KP103A50 breather unit supports controlled ventilation and degassing within the heat exchanger system, helping maintain stable operation and reducing the risk of air pockets in the cooling circuit. Used as part of the heat exchanger assembly (including the heat exchanger exhaust-manifold arrangement on certain builds), it is specified for N2.14, N3.21, and N3.21 Standard engines.
|
$ 181.95
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel KP500U00 exhaust mixer unit is built for the exhaust mixer assembly on N4.115 engines, blending cooling water into the exhaust stream to manage outlet temperatures and support safe, efficient discharge through the marine exhaust system. Designed as a direct-fit replacement, it helps maintain reliable wet-exhaust operation and protects downstream hoses and components from excessive heat.
|
$ 837.77
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel QCC33010TF 33C threaded collar jacket is a control-hardware element used to secure and locate a 33C jacket connection within key engine and drivetrain control points. Installed across assemblies such as the gear box flange, gear box, speed regulator, drive speed control, flywheel housing, accelerator, and electrical stop systems, it supports stable cable routing and consistent command transfer on 2.40HE, 2.45HE, 2.50HE, 2.60HE, 3.75HE, 3.90HE, 4.110HE, 4.150HE, 4.190HE, 4.195HE, 4.200HE, 4.220HE, and 5.280HE engines.
|
$ 30.21
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel QCC33014TF counter plate is a positioning and support element used across several control and driveline assemblies, including the gear box, gear box flange, speed regulator, accelerator, and electrical stop systems. Designed for OEM-correct fit on Nanni HE marine diesel engines, it helps maintain secure component alignment and dependable operation on 2.40HE, 2.50HE, 2.60HE, 3.75HE, 3.90HE, 4.110HE, 4.150HE, 4.190HE, 4.195HE, 4.200HE, 4.220HE, and 5.280HE engines.
|
$ 30.21
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel TA600V02PR engine mount set with adjusting nut is a two-mount assembly (40 SH) built for the engine mount system on T4.155 and 4.380TDI stern drive engines. It supports stable engine positioning while allowing precise alignment adjustment, helping reduce vibration transfer and maintaining correct drivetrain geometry under changing loads.
|
$ 647.68
-
+
| ||
|
1-2 weeks delivery time The Nanni 30801000 Reggiani Nautica brass and rubber bearing is a marine cutless bearing designed for propeller shaft support in inboard propulsion systems. Engineered with a brass outer shell and durable rubber lining, the bearing provides reliable shaft guidance, vibration reduction, and smooth water-lubricated operation. Designed for 35 mm propeller shafts, the bearing features a 140 mm overall length and is suitable for continuous marine use in seawater environments.
|
$ 290.89
-
+
| ||
|
1-2 weeks delivery time The Nanni 31408S253 sail drive propeller is a 2-blade aluminium marine propeller designed for sail drive propulsion systems. Featuring a 14-inch diameter with 8-inch pitch, this propeller is optimized for efficient thrust, smooth engine load characteristics, and reliable maneuverability on sailing yachts and small motor sailers. Manufactured from marine-grade aluminium alloy, the propeller offers reduced weight, corrosion resistance, and dependable long-term performance in seawater environments.
|
$ 1,363.35
-
+
| ||
|
1-2 weeks delivery time The Nanni 31410S253 sail drive propeller is a 2-blade aluminium marine propeller designed for sail drive propulsion systems on sailing yachts and auxiliary marine engines. Featuring a 14-inch diameter with 10-inch pitch, this propeller provides balanced thrust efficiency, improved cruising performance, and reliable maneuverability at low and medium engine speeds. Manufactured from marine-grade aluminium alloy, the propeller combines lightweight construction with strong corrosion resistance for continuous operation in seawater environments.
|
$ 1,363.35
-
+
| ||
|
1-2 weeks delivery time The Nanni 31411S253 sail drive propeller is a 2-blade aluminium marine propeller designed for sail drive propulsion systems on sailing yachts and auxiliary marine engines. Featuring a 14-inch diameter with 11-inch pitch, this propeller is optimized for efficient thrust transfer, stable cruising performance, and reliable maneuverability under varying load conditions. Manufactured from marine-grade aluminium alloy, the propeller combines lightweight construction with strong corrosion resistance for long-term operation in seawater environments.
|
$ 1,363.35
-
+
| ||
|
1-2 weeks delivery time The Nanni 31509S253 sail drive propeller is a 2-blade aluminium marine propeller designed for sail drive propulsion systems on sailing yachts and auxiliary marine engines. Featuring a 15-inch diameter with 9-inch pitch, this propeller provides balanced thrust performance, smooth acceleration, and reliable maneuverability for cruising and recreational marine applications. Manufactured from marine-grade aluminium alloy, the propeller combines lightweight construction with excellent resistance to marine corrosion and long-term seawater exposure.
|
$ 1,503.18
-
+
| ||
|
1-2 weeks delivery time The Nanni 31510S253 sail drive propeller is a 2-blade aluminium marine propeller designed for sail drive propulsion systems on sailing yachts and auxiliary marine engines. Featuring a 15-inch diameter with 10-inch pitch, this propeller provides efficient thrust transfer, stable cruising performance, and reliable low-speed maneuverability for recreational and cruising applications. Manufactured from marine-grade aluminium alloy, the propeller combines lightweight construction with strong corrosion resistance for continuous operation in seawater environments.
|
$ 1,503.18
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.