Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970493118 feather key is a precision drive-key element used to locate and lock rotating components in place to maintain accurate alignment under load. Installed within assemblies such as the engine block, crankcase and cylinders group, oil pump, and the camshaft balance assembly, it helps transmit torque and prevent relative movement between shafts and matched components on 2.60HE, 3.90HE, 4.110HE, 4.190HE, 4.195HE, 4.200HE, 4.200TD, 4.220HE, 5.250TDI, 5.280HE, N4.40, N4.50, N4.60, N4.65, N4.85, and N4.100 engines.
|
$ 3.82
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493119 M10 nut is a precision fastener used within the engine block assembly to securely clamp and retain critical components under vibration and thermal cycling. Designed for OEM fit on Nanni HE series marine diesel engines, it supports dependable service on 2.40HE, 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 2.29
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493120 D10 claw washer is a locking fastener element used in the engine block assembly to help resist loosening from vibration and thermal cycling in marine service. Designed for OEM fitment on Nanni Diesel 2.40HE, 2.60HE, 3.90HE, and 4.110HE engines, it supports secure clamping where D10 hardware is used on the block.
|
$ 2.20
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493129 oil filter O-ring is a sealing element for the oil filtration circuit on 3.90HE engines. Used within the engine block assembly and also referenced in the oil sump and oil pump group, it helps maintain a tight, leak-resistant joint where the oil filter interface depends on a secure seal for steady oil pressure and clean operation.
|
$ 6.16
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493131 relief valve assembly is a timing-gear-case mounted control component that helps regulate internal pressure or flow within the engine’s front-end system. Installed as part of the timing gear case assembly, it supports stable operation and protection of connected oil passages on Nanni 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 137.70
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493132 O-ring seal supports leak-free operation in the timing gear case area, helping maintain proper oil containment and protecting the timing case from contamination in marine service. Designed as an OEM replacement for the timing gear case assembly, it fits a wide range of Nanni engines including 2.60HE, 3.90HE, 4.110HE, 4.200TD, N4.40, N4.50, and N4.60 variants.
|
$ 4.06
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493150 oil filtration element keeps engine lubricant cleaner by capturing contaminants as part of the oil filter system and maintenance kit on HE series marine diesel engines. Designed for OEM-style fit and service, it supports dependable oil flow and wear protection on 2.40HE, 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 29.72
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493155 sealing O-ring is a precision-fit gasket element used within key service points on Nanni marine engines, appearing in the alternator and oil filter assemblies and also included in the maintenance kit for 4.110HE. Designed to maintain tight sealing where it is installed, it supports leak-free operation and dependable servicing on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 5.08
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970493157 oil filter nipple is a dedicated connection element used within the oil filter assembly to secure proper mounting and oil-flow routing at the filter interface. Designed for OEM fit on Nanni HE series marine diesel engines, it supports dependable lubrication-system service on 2.40HE, 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 6.66
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970494004 sea water pump clamp is a securing fastener used in the sea water pump assembly to hold pump-related connections firmly in place for dependable raw-water cooling flow. Designed for fit on Nanni 2.60HE and 3.90HE engines, it helps maintain stable hose or component retention under vibration and continuous marine duty.
|
$ 31.66
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970494516 M6 lock nut is a secure fastening element used across multiple engine assemblies to resist loosening from vibration and thermal cycling. Fitted within systems such as the heat exchanger, air filter, speed control, and turbocharger and exhaust mixer assemblies, it supports dependable component retention on 3.90HE, 4.110HE, T4.165, T4.180, T4.200, T6.420TDI, and T6.300 engines.
|
$ 0.17
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970494618 thermostat housing gasket provides a secure seal within the fresh water pump assembly to help maintain stable coolant flow and temperature control. Designed for OEM-fit replacement on Nanni Diesel 2.60HE and 4.110HE engines, it supports leak-free operation at the thermostat housing joint during routine service or cooling-system repairs.
|
$ 21.25
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970495102 intake manifold gasket is a sealing element for the intake manifold assembly, designed to maintain a tight joint between the manifold and its mating surface for stable airflow and clean engine operation. Built for OEM-fit replacement on Nanni Diesel HE series marine engines, it supports reliable intake sealing on 2.60HE, 3.90HE, and 4.110HE engines.
|
$ 22.37
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970495103 intake manifold sealing element ensures an airtight joint within the intake manifold assembly, helping maintain stable airflow to the cylinders for clean, consistent engine running. Designed as an OEM-fit replacement for Nanni HE marine diesel engines, it is used on 2.60HE, 3.90HE, and 4.110HE applications to support dependable manifold sealing during service or overhaul.
|
$ 23.43
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970496045 crankcase breather hose routes crankcase ventilation flow back into the intake air stream, helping maintain clean, stable engine breathing on HE series marine diesels. Used within the intake manifold or air filter assemblies (depending on engine model), it supports proper crankcase pressure control and secure hose connections on 2.60HE, 3.90HE, 4.110HE, 4.190HE, 4.195HE, 4.200HE, 4.220HE, and 5.280HE engines.
|
$ 55.86
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970497302 starter stator is an electrical field component used within the starter motor details assembly to support consistent cranking performance. Designed for OEM-fit replacement on Nanni 2.60HE, 3.75HE, and 3.90HE engines, it helps restore proper starter operation by maintaining the magnetic field needed for reliable engine starting.
|
$ 1,065.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970497303 starter motor is a 12V, 0.8 kW, 1P electric starting unit built to crank HE series marine diesel engines quickly and consistently. Used within the electrical equipment system and associated with the flywheel and starter details assemblies, it is the correct fit for 2.60HE, 3.75HE, and 3.90HE engines for dependable starts at the dock or underway.
|
$ 1,369.89
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970497304 starter rotor is the rotating electrical element inside the starter motor, built to restore strong, consistent cranking performance on marine diesel applications. Supplied as part of the Starter Details assembly, this rotor suits Nanni 2.60HE, 3.75HE, and 3.90HE engines, helping the starter convert electrical power into the torque needed for reliable engine starting.
|
$ 1,206.70
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970497305 starter motor clutch is a starter-drive component used in the Starter Motor Details assembly, supporting smooth starter engagement for reliable engine cranking. Built for Nanni HE engines, it fits 2.60HE, 3.75HE, and 3.90HE applications where the starter motor clutch is specified as the 2.60 type.
|
$ 678.89
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970497308 starter motor bushing is a precision support element used within the starter details assembly to help keep the starter shaft properly aligned during cranking. Designed for Nanni 2.60HE and 3.90HE engines, it promotes smooth starter operation and dependable engine starts by reducing unwanted play in the starter motor support point.
|
$ 31.99
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.