Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970314917 cylinder head sealing gasket is a standard two-notch version built for the cylinder head assembly, helping maintain proper sealing between the cylinder head and engine block under marine operating loads. It is intended for use on N4.85 and N4.100 engines to support stable compression and controlled coolant and combustion-gas sealing at the head interface.
|
$ 664.41
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314918 cylinder head sealing gasket with a 1-notch identification is built for the cylinder head assembly, helping maintain a tight seal between the cylinder head and engine block for stable compression and controlled coolant and combustion-gas sealing. It is specified for Nanni Diesel N4.85 and N4.100 marine engines, making it a precise OEM replacement choice during head service or overhaul.
|
$ 684.45
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314919 cylinder head sealing gasket is a cylinder head assembly component designed to maintain a tight seal between the cylinder head and engine block. Identified as the Suitability No Notch version, it supports consistent compression and dependable coolant and combustion sealing on N4.85 and N4.100 engines.
|
$ 685.36
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314920 timing case sealing gasket is built to close and protect the timing case joint within the timing case assembly, helping keep the front gear housing properly sealed in service. Designed for OEM-fit replacement on Nanni Diesel N4.85 and N4.100 engines, it supports clean, reliable operation by maintaining a tight interface between mating surfaces in the timing area.
|
$ 358.70
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314921 camshaft assembly is a precision valvetrain component for the camshaft assembly group, designed to drive accurate valve timing in Nanni marine diesel engines. Built for dependable synchronization of engine breathing and combustion events, it is suited for N4.85 and N4.100 engines where consistent timing control supports smooth running and efficient performance.
|
$ 4,663.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314922 camshaft sealing plug is a small but critical closure element used in the injection pump camshaft assembly, helping secure the camshaft bore and maintain proper oil containment. Designed for a correct OEM-style fit, it supports dependable operation on N4.85 and N4.100 engines in marine duty cycles.
|
$ 44.04
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314923 roller bearing is a precision support element used within the timing gear case, helping the timing drive components rotate smoothly and stay properly aligned under load. Designed as an OEM replacement for N4.85 and N4.100 engines, it supports stable operation of the engine’s timing system for dependable marine performance.
|
$ 574.19
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314924 roller bearing is a precision camshaft support component used in the camshaft assembly to keep rotation smooth and accurately aligned under load. Designed for dependable OEM fit in Nanni marine diesel engines, it supports stable valve timing operation on N4.85 and N4.100 engine installations.
|
$ 641.75
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314925 camshaft drive gear is a precision drivetrain element used within the camshaft assembly to transmit timing motion accurately and keep valve events synchronized with crankshaft rotation. Designed for dependable OEM fit in Nanni marine diesel applications, it suits N4.85 and N4.100 engines for reliable timing performance under continuous load.
|
$ 3,242.17
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314926 connecting rod bushing is a precision-fit wear element within the crankshaft and pistons assembly, supporting smooth connecting rod movement under load. Designed for N4.85 and N4.100 engines, it helps maintain proper running clearance at the rod joint to promote stable operation and long service life in marine duty.
|
$ 33.32
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314927 connecting rod assembly is a precision engine component that links the piston to the crankshaft for smooth conversion of combustion force into rotating torque. Installed within the crankshaft and pistons assembly, it supports reliable piston motion and load handling on N4.85 and N4.100 engines used in marine propulsion applications.
|
$ 2,129.31
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314931 crankshaft gear assembly is a drivetrain timing element within the crankshaft and pistons assembly, designed to transfer crankshaft rotation into the engine’s gear train. Built for N4.85 and N4.100 engines, it supports stable mechanical synchronization for smooth, dependable marine diesel operation.
|
$ 1,863.52
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314932 complete engine flywheel is a drivetrain component for the flywheel assembly, used on N4.85 and N4.100 engines. It supports smooth power transfer from the crankshaft to the coupling and gearbox, helping maintain stable idle characteristics and consistent rotation under load for dependable marine propulsion operation.
|
$ 5,722.04
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314933 oil pickup strainer supports dependable lubrication by filtering debris before oil enters the pump circuit in the oil pan assembly. Designed as an OEM replacement for Nanni Diesel N4.85 and N4.100 engines, it helps protect internal engine components by promoting clean, consistent oil flow at startup and under load.
|
$ 274.40
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314934 camshaft jet is a small metering component used within the camshaft assembly to direct a controlled flow of fluid where it is needed for smooth, reliable operation. Designed for OEM-fit replacement, it supports consistent engine running on N4.85 and N4.100 engines.
|
$ 117.53
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314935 cooler assembly is an OEM replacement component used within the oil filter assembly on Nanni N4.85 and N4.100 marine engines. Integrated into the engine’s lubrication circuit, it supports stable oil operating temperatures to help protect internal components and maintain dependable performance under load.
|
$ 2,710.25
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314936 oil-filter connector is a dedicated connection element within the oil filter assembly, supporting secure routing and attachment where the filtration circuit interfaces with the engine. Designed for N4.85 and N4.100 engines, it helps maintain a dependable oil-filter installation for consistent lubrication system operation in marine duty.
|
$ 212.37
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314937 fuel filter support is a mounting component used in the fuel filter system to secure the filter assembly in place and keep the fuel circuit stable under engine vibration. Installed as part of the fuel filter assembly, it is suited for Nanni Diesel N4.85 and N4.100 engines where a solid, OEM-fit support helps maintain clean and consistent fuel delivery.
|
$ 175.19
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314938 injection pump housing assembly supports secure mounting and correct alignment within the injection pump camshaft system, helping maintain precise fuel system timing and stable operation in N4.85 and N4.100 engines. Installed as part of the injection pump camshaft assembly, this OEM replacement housing keeps critical components properly located for reliable marine-duty performance.
|
$ 1,316.30
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314939 ball bearing is a precision rolling element designed for the injection pump camshaft assembly, helping the camshaft rotate smoothly with reduced friction and stable alignment. Used on N4.85 and N4.100 engines, it supports consistent injection-pump drive operation and dependable engine performance under marine duty cycles.
|
$ 115.19
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.