Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970314031 oil cooler cover sub-assembly is a dedicated cover component used within the oil filter assembly and oil cooler filter assembly on T4 series engines. Designed to restore correct closure and internal oil-routing integrity around the oil cooler section, it supports clean, controlled oil flow and dependable engine lubrication on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines.
|
$ 2,306.28
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314032 engine oil cooler assembly helps control lubricating-oil temperature for dependable protection under marine load. Used within the oil cooler system and also listed under the oil cooler filter assembly, this OEM unit supports stable oil viscosity and overall engine reliability on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines.
|
$ 3,935.56
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314035 sealing gasket is a versatile OEM replacement element used across multiple T4 engine assemblies, supporting tight joints where fluids and exhaust-side cooling circuits must remain contained. It appears within the gasket set, cylinder head assembly, and several heat exchanger groupings—including the heat exchanger exhaust manifold and heat exchanger PONAM/SARD assemblies—for T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines.
|
$ 8.55
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314042 intake manifold insulating element No. 2 supports stable airflow and thermal isolation within the intake manifold assembly, helping protect mating surfaces and maintain consistent intake conditions in marine operation. Designed as an OEM-fit replacement for Nanni Diesel T4.165, T4.180, and T4.200 engines, it installs in the intake manifold system for dependable service and proper component alignment.
|
$ 227.61
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314048 crank angle sensor plate is a precision mounting and reference plate used within the crankshaft and piston assembly to support accurate crank position sensing. Installed in the crankshaft pistons group (including the cataloged p.11 configuration), it helps maintain stable sensor alignment for dependable engine timing on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines.
|
$ 214.86
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314049 glow plug assembly supports reliable cold starting by preheating the combustion chamber for cleaner ignition during cranking. Supplied as part of the glow plug system, it is a direct-fit replacement for T4.165, T4.180, and T4.200 engines, helping maintain consistent start-up performance in demanding marine conditions.
|
$ 347.08
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314050 glow plug connector is a dedicated electrical connector used in the glow plug assembly to ensure a secure, low-resistance connection for reliable preheating during cold starts. Designed for Nanni T4 series marine diesel applications, it supports consistent starting performance on T4.165, T4.180, T4.200, T4.270, and T4.230 engines.
|
$ 87.36
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314058 cylinder head cover gasket element No. 3 seals the cylinder head cover assembly to help keep engine oil contained and protect the valvetrain area from leaks. Designed for the cylinder head cover system on Nanni T4.165, T4.180, and T4.200 engines, it supports clean, dependable operation and an OEM-correct fit during routine service.
|
$ 71.31
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314070 EGR opening cover plate is a cylinder head assembly component that closes off the EGR port area to maintain a clean, secure seal on the head. Designed for OEM-style fit on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines, it supports reliable cylinder head integrity during service and refit work.
|
$ 255.46
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314071 EGR inlet sealing gasket helps maintain a tight, leak-resistant joint at the exhaust gas recirculation inlet interface on T4.165, T4.180, and T4.200 engines. Used within the cylinder head system and also listed under the gasket set assembly, it supports stable EGR flow control and helps protect surrounding components from exhaust leaks in demanding marine duty cycles.
|
$ 25.50
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314072 diesel throttle sealing element supports an airtight joint at the diesel throttle interface to help maintain stable intake airflow and consistent engine response. Used within the gasket set and also applied on the intake manifold and intercooler assemblies, it is a correct-fit replacement for Nanni Diesel T4.165, T4.180, and T4.200 engines.
|
$ 3.95
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314073 alternator assembly with regulator is a complete charging unit built to keep the onboard electrical system supplied with stable power while the engine is running. Supplied as part of the standard alternator assembly, it supports dependable battery charging and electrical load management on T4.165, T4.180, and T4.200 engines.
|
$ 1,886.58
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314075 rubber mounting element supports secure, vibration-damping installation within the EC electrical system and the EDU assembly used on T4 series marine engines. Positioned as part of the ECU and circuit breaker assembly, it helps protect sensitive electrical components from engine and hull vibration on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines.
|
$ 49.24
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314077 electrical relay is a switching component within the electrics system that helps manage power distribution and circuit control on board. Designed for OEM-style fitment in the electrics assembly, it supports dependable electrical operation on Nanni T4.165, T4.180, and T4.200 marine diesel engines.
|
$ 684.24
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314078 vacuum pump packing is a sealing element used within the sea water pump assembly to help maintain tight, reliable operation of the pump system on Nanni marine diesel installations. Designed for fitment on T4.270, T4.230, and T4.205 Standard engines, it supports dependable water pump performance by helping control leakage at the vacuum pump packing area.
|
$ 30.69
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314080 wiring harness clamp secures and organizes engine electrical looms for a clean, vibration-resistant installation on T4.165, T4.180, and T4.200 engines. Used within both the cylinder head cover area and the injection and fuel pump assembly, it helps prevent chafing and movement of wiring near heat and rotating components, supporting reliable sensor and system connections underway.
|
$ 36.83
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314081 wiring harness clamp secures and organizes engine electrical wiring within the timing case assembly, helping protect the harness from movement, chafe, and vibration-related wear. Designed for a clean OEM-style fit on Nanni T4.165, T4.180, and T4.200 engines, it supports reliable sensor and charging-system connections by keeping routing stable in demanding marine service.
|
$ 17.47
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314082 wiring harness clamp bracket secures and guides engine wiring in the timing case area to help prevent chafing and vibration-related damage. Installed as part of the timing case assembly, it supports tidy, reliable cable routing on T4.165, T4.180, and T4.200 engines for cleaner service access and dependable electrical system operation.
|
$ 5.08
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314083 wiring harness clamp bracket secures and guides engine wiring looms for a clean, protected installation on T4.165, T4.180, and T4.200 engines. Used within both the cylinder head cover area and the injection and fuel pump assembly, it helps prevent chafing and vibration-related wire damage while keeping harness routing stable in demanding marine engine-room conditions.
|
$ 51
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970314089 injector driver is a control element used within the EDU assembly to manage injector actuation for precise fuel delivery on Nanni T4.165, T4.180, and T4.200 engines. Designed as an OEM-fit replacement, it supports stable engine response, efficient combustion, and reliable operation under changing marine load conditions.
|
$ 10,754.14
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.