Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970313755 gasket is a sealing element for the timing gear case, helping maintain a tight joint between mating surfaces to protect the timing gear area from oil seepage and external contamination on N2.14 engines. Designed as an OEM replacement part, it supports clean, reliable operation of the engine’s timing drive housing.
|
$ 11.28
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313771 exhaust elbow sealing gasket is designed to create a tight, reliable joint within the exhaust elbow assembly on N4.85 and N4.100 engines. It helps maintain a leak-resistant connection at the elbow interface, supporting safe exhaust flow management and dependable operation in marine installations.
|
$ 105.76
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313802 O-ring is a sealing element used within the accelerator and speed control assemblies to help maintain tight, leak-resistant joints in control-system components. Designed for Nanni N2.14 engines and also specified for N3.21 and N3.21 Standard engines, it supports smooth, dependable throttle and control operation by protecting internal passages and interfaces from unwanted leakage.
|
$ 5.40
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313803 O-ring is a sealing element used within the crankshaft and pistons assembly to help maintain oil-tight integrity around critical rotating and reciprocating components. Designed for OEM fit on Nanni N2.14, N3.21, and N3.21 Standard engines, it supports dependable sealing performance for stable operation in marine duty cycles.
|
$ 19.41
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313804 O-ring seal is a dedicated sealing element for the cylinder head cover, helping maintain a leak-tight joint under engine heat and vibration. Designed for dependable OEM fitment, it supports clean operation on N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines by sealing the cover-to-head interface.
|
$ 11.09
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313805 engine block plug is a dedicated closing element used on the engine block assembly to seal a machined port in the block casting. Built for correct fit on Nanni N2.14 engines, it helps maintain the integrity of the engine block by securely closing the opening as intended by the original design.
|
$ 11.72
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313808 valve-train spring is a replacement spring used within the valves and springs assembly to support stable valve operation in Nanni marine diesel engines. Designed for fit on N2.14, N3.21, and N3.21 Standard engines, it helps maintain consistent valve control as the engine runs through changing speeds and loads.
|
$ 2.91
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313811 crankshaft side bearing element (+0.40 mm) is designed for the crankshaft-pistons assembly, helping control crankshaft end float and supporting stable bottom-end alignment under marine engine loads. This OEM-fit component suits N2.14 engines as well as N3.21 and N3.21 Standard engines, making it a dependable choice during crankshaft and piston train service.
|
$ 56.03
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313812 bearing case cover assembly is designed to close and protect the crankshaft bearing area as part of the crankshaft and crankshaft-bearings assembly. Built for correct OEM fit during service work, it helps maintain proper enclosure and support around the crankshaft bearing case on N2.14, N3.21, and N3.21 Standard marine diesel engines.
|
$ 263.31
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313814 rocker arm shaft is a valvetrain support component used within the valves and springs assembly on N2.14 engines. It provides a stable shaft for the rocker arm mechanism, helping maintain accurate valve actuation and consistent engine operation under marine duty cycles.
|
$ 225.11
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313818 complete water flange assembly is a cylinder head cooling-system connection component designed to route engine coolant through the cylinder head circuit. Installed as part of the cylinder head assembly, it supports secure hose and passage interfacing on Nanni N2.14, N3.21, and N3.21 Standard marine diesel engines for dependable cooling flow management.
|
$ 337.99
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313819 1.025 mm adjusting washer is a precision shim used within the injection nozzle and nozzle holder assembly to help set correct injector positioning and calibration. Designed for N2.14 engines and for N3.21 engines including N3.21 Standard, it supports consistent injector operation by maintaining the intended spacing inside the injector holder stack-up.
|
$ 7.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313820 adjusting washer (1.050 mm) is a precision shim used within the injection nozzle and nozzle holder assembly to set correct injector stack height during assembly and service. Designed for Nanni Diesel N2.14 engines and the N3.21 range (including N3.21 Standard engines), it supports accurate injector seating and dependable fuel-system operation.
|
$ 7.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313821 1.075 mm adjusting washer is a precision shim used in the injection nozzle and nozzle holder assembly to set correct injector stack height and support consistent fuel injection performance. Installed in the injector holder area, it suits N2.14 engines as well as N3.21 and N3.21 Standard engines, making it a practical OEM replacement for injector service and calibration work.
|
$ 7.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313822 adjusting washer (1.100 mm) is a precision shim used in the injection nozzle and nozzle holder assembly to set the correct injector stack height during service. Designed for N2.14 and N3.21 engines, including N3.21 Standard, it supports accurate injector installation for consistent fuel delivery and dependable starting and running characteristics.
|
$ 7.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313823 1.125 mm adjusting washer is a precision shim used in the injection nozzle and nozzle holder assemblies to set the correct internal spacing during injector service. Designed for Nanni Diesel N2.14 engines and N3.21 engines including N3.21 Standard, it supports accurate reassembly of the injector stack for consistent fuel delivery.
|
$ 8.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313824 1.150mm adjusting washer is a precision shim used in the injection nozzle and nozzle holder assemblies to fine-tune injector setup during service. Installed within the injector hardware to help maintain correct component spacing, it supports consistent injection system operation on N2.14, N3.21, and N3.21 Standard engines.
|
$ 8.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313825 1.175 mm adjusting washer is a precision shim used within the injection nozzle and nozzle holder assembly to help maintain correct injector setup. Used on N2.14 engines and across N3.21 and N3.21 Standard engines, this washer supports accurate nozzle holder spacing for stable fuel injection performance and consistent engine running.
|
$ 8.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313827 1.225 mm adjusting washer is a precision shim used within the injection nozzle and nozzle holder assembly to help set correct injector stack-up and seating. Installed in the nozzle holder group, it supports consistent injection performance on N2.14 engines and on N3.21 engines, including N3.21 Standard.
|
$ 8.94
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313828 1.250 mm adjusting washer is a precision shim used within the injection nozzle and nozzle holder assembly to set correct injector stack height during service work. Fitted to N2.14, N3.21, and N3.21 Standard engines, it supports accurate injector setup and helps maintain consistent fuel injection performance.
|
$ 8.94
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.