Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970313262 sealing gasket supports clean, leak-free assembly at the nozzle holder and glow plug interface on N4.115 engines. Installed within the nozzle holder and glow plug assembly, it helps maintain proper sealing where these components meet, protecting combustion and preventing unwanted gas or fluid seepage in demanding marine engine operation.
|
$ 7.17
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313263 O-ring seal supports leak-free operation within the nozzle holder and glow plug assembly on N4.115 engines. Designed as an OEM-fit sealing element, it helps maintain proper sealing at the injector and glow plug area to protect fuel-system integrity and keep the engine running cleanly and reliably.
|
$ 7.12
-
+
| ||
|
1-2 weeks delivery time Expansion component for Nanni Diesel N3.30 engines. Used within engine system assemblies.
|
$ 10.28
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313275 water inlet cover is a heat-exchanger component that closes and protects the water inlet area, helping direct raw-water flow into the cooling circuit for stable engine temperature control. Used in the heat exchanger assembly (including the heat exchanger details section, and heat exchanger page 24 listings), it fits N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines for clean, OEM-correct service replacement.
|
$ 66.85
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313276 water inlet cover is a heat-exchanger housing component that closes and protects the inlet side of the cooling circuit to help maintain controlled coolant and sea-water flow through the exchanger. Used within the heat exchanger details assembly, it supports a secure, serviceable connection point on N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines.
|
$ 80.92
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313306 engine oil filter element helps maintain clean lubrication flow for dependable marine diesel operation. Used within the oil filter assembly and the oil and cooler filter assembly, it captures contaminants that can accelerate wear, supporting smooth oil circulation on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines.
|
$ 32.76
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313309 flywheel fastener bolt is designed to secure key driveline mating points within the flywheel housing and gearbox flange assemblies. Built for OEM-style fitment, it helps keep alignment stable between the engine and transmission interface on N2.10, N2.14, N3.21, N3.21 Sail Drive, and N3.21 Standard engines.
|
$ 26.73
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313311 fastening bolt is a versatile OEM replacement used across key engine assemblies including the cylinder head, oil sump and oil pump group, oil pan, camshaft injection pump area, and camshaft fuel system. Designed to restore secure clamping and reliable alignment of joined components, it supports dependable service on a wide range of Nanni diesel models such as 2.40HE, 2.45HE, 2.50HE, 3.100HE, 3.75HE, 4.150HE, 4.200HE, 4.200TD, 4.220HE, 5.250TDI, 5.280HE, and the N-series engines including N2.14 through N4.65.
|
$ 2.78
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313313 complete flywheel unit is a flywheel assembly used within the flywheel housing and the transmission flange area on N3.21 marine diesel installations. It provides the rotating mass needed for smooth engine operation and stable power delivery, and it is listed for N3.21 and N3.21 Standard engines, with a machining release reference to 95312364B.
|
$ 4,190.70
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313314 flywheel is a drivetrain rotating mass used within the flywheel housing and, on selected builds, at the gearbox flange to smooth engine pulses and deliver stable torque into the transmission line. This OEM replacement flywheel fits N2.10, N2.14, and N3.21 Sail Drive engines and is referenced as released under 95312364A for machining.
|
$ 2,008.27
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313316 clamp is a securing fastener used in the turbo and exhaust mixer assembly to keep exhaust-side connections tightly joined under vibration and heat. Designed for marine-duty service, it supports a stable, leak-resistant joint on 4.200TD, N4.60, and N4.65 engines, helping maintain correct exhaust gas routing into the exhaust mixer.
|
$ 49.87
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313324 union is a precision connection fitting used within the nozzle holder and glow plug assembly on N4.115 engines. It supports secure routing and sealing of the associated lines and components, helping maintain dependable starting and fuel-injection related serviceability with an OEM-correct fit.
|
$ 40.26
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313325 fuse is a protective electrical element used in the Electrics assembly to help safeguard onboard engine circuits from overcurrent conditions. Designed for dependable OEM fit on Nanni Diesel T4.165, T4.180, and T4.200 engines, it supports reliable starting, charging, and instrumentation operation by maintaining proper circuit protection in the engine electrical system.
|
$ 1.47
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313340 fresh water pump fastener bolt is designed to secure the fresh water pump assembly on Nanni marine diesel engines. Used within the fresh water pump system, it helps keep the pump correctly mounted and stable under vibration and thermal cycling on N3.30 and N4.38 engines.
|
$ 7.69
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313344 hex socket head fastener is a precision bolt used in the governor setting assembly on N3.30 engines and in the electric stop assembly on N4.85 and N4.100 engines. Designed for secure, vibration-resistant clamping, it helps keep critical control components firmly positioned for dependable engine operation.
|
$ 2.49
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313345 flange-head bolt is a fastening element used within the fresh water pump assembly on N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines, and within the camshaft assembly on N4.65 engines. Designed for secure clamping and dependable retention under marine engine vibration and heat cycling, it supports proper alignment and leak-free operation where correct fastener load is essential.
|
$ 3.74
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313346 flange bolt is a dedicated fastener used in the valve and spring assembly, helping secure valvetrain components so clearances and alignment remain stable under continuous engine vibration. Designed for Nanni N2.14 engines as well as N3.21 and N3.21 Standard engines, it supports dependable top-end service work with an OEM-correct fit.
|
$ 6.99
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313347 timing case fastener is a dedicated screw used within the timing case assembly to secure covers and mating components in place. Designed for OEM-correct fit on N3.30 and N4.38 engines, it helps maintain proper timing case closure and supports reliable sealing and alignment in the engine’s front-end gear area.
|
$ 0.91
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313348 gasket is a sealing element used within the speed control assembly on N4.38 engines. It helps maintain a tight interface between speed control components to support stable engine speed regulation and protect the mechanism from leakage and contamination in marine engine operating conditions.
|
$ 8.08
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970313349 sealing O-ring is a precision-fit seal used in the timing gear case area to help keep the timing case joint oil-tight and protected from leaks. Supplied as an OEM replacement for the timing gear case assembly, it fits N2.14 engines and is also used on N3.21 engines up to serial No. KTC08050772, including N3.21 Standard engines as listed for the timing gear case assembly.
|
$ 8.37
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.