Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970312518 oil filler cap sub-assembly provides a secure, service-friendly sealing point for adding engine oil at the cylinder head. Used within the cylinder head assembly on T6.420TDI and T6.300 engines, it helps keep the lubrication system protected from oil splash and external contamination while supporting clean, routine maintenance.
|
$ 193.13
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312519 cylinder head sealing gasket supports a tight, stable seal within the cylinder head assembly to help maintain compression and control fluid separation during marine engine operation. Designed as an OEM-fit replacement for Nanni Diesel T6.420TDI and T6.300 engines, it restores proper sealing performance when servicing the cylinder head.
|
$ 20.31
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312520 cylinder head cover sub-assembly is a complete cover unit for the cylinder head assembly, built to protect the top end and support stable sealing on Nanni T6 marine diesel engines. Designed for T6.420TDI and T6.300 engines, it helps keep the cylinder head area properly enclosed for clean, reliable operation in demanding onboard conditions.
|
$ 6,898.53
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312522 cylinder head cover fastener secures the cylinder head cover as part of the cylinder head assembly on T6.420TDI and T6.300 engines. Built for a correct OEM-style fit, this bolt helps keep the cover clamped evenly to support clean sealing, stable running conditions, and dependable protection of valvetrain components in marine service.
|
$ 37.30
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312524 hex-head bolt with an integrated captive washer is a secure, vibration-resistant fastener used in the cylinder head assembly. Designed to clamp components evenly and maintain consistent holding force, it is the correct OEM replacement for Nanni Diesel T6.420TDI and T6.300 engines in marine duty.
|
$ 20.31
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312525 straight pin is a precision locating element used in the cylinder head assembly to help position and align mating components during installation. Built for a secure OEM-style fit, it supports accurate assembly and consistent sealing surfaces on Nanni T6.420TDI and T6.300 marine diesel engines.
|
$ 12.75
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312526 semicircular plug is a cylinder-head sealing element designed to close off a shaped opening in the cylinder head assembly, helping maintain proper internal sealing and protecting the engine from oil or coolant seepage in service. It is used in the cylinder head system on T6.420TDI and T6.300 engines for a secure OEM-style fit during maintenance or overhaul.
|
$ 108.14
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312527 plate washer is a securing element used in the cylinder head set within the cylinder head assembly, helping distribute clamping load and maintain stable fastening under engine vibration and heat cycling. Built for OEM-style fit on Nanni T6.420TDI and T6.300 marine diesel engines, it supports consistent cylinder head retention during service and rebuild work.
|
$ 19.36
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312528 cylinder head fastener bolt is designed for the cylinder head assembly and is supplied for the cylinder head set with L=133.5. It secures the cylinder head to the engine structure with dependable clamping force to help maintain a stable seal and consistent engine operation on T6.420TDI and T6.300 engines.
|
$ 102
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312529 cylinder head fastening bolt provides secure, consistent clamping of the cylinder head set within the cylinder head assembly. Specified for a 121.5 length application, it is built to help maintain head-to-block sealing stability on Nanni T6.420TDI and T6.300 marine diesel engines under demanding thermal and load cycles.
|
$ 151.58
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312530 cylinder head sub-assembly is a complete cylinder head unit built for the cylinder head system on Nanni marine diesel engines. Designed for T6.420TDI and T6.300 engines, it restores proper sealing and internal gas-flow control at the top end of the engine, supporting stable compression, efficient combustion, and dependable running under marine load.
|
$ 49,637.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312531 valve guide bushing is a standard-size cylinder head component that supports accurate intake and exhaust valve alignment for smooth, efficient valve motion. Used within the cylinder head assembly on T6.420TDI and T6.300 engines, it helps maintain stable valve operation and consistent sealing at the valve seat under marine-duty temperatures and loads.
|
$ 225.24
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312532 valve guide bushing supports accurate intake and exhaust valve alignment within the cylinder head assembly, promoting stable valve motion and consistent sealing in the combustion chamber. Supplied in oversize 0.05 for service fitment during cylinder head work, it is intended for Nanni Diesel T6.420TDI and T6.300 engines.
|
$ 195.02
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312533 cylinder head sealing plug No. 2 is a dedicated closure element used in the cylinder head assembly to secure a port and maintain a leak-tight seal. Designed for OEM-fit replacement on Nanni T6 series marine diesels, it supports dependable cylinder head integrity on T6.420TDI and T6.300 engines.
|
$ 69.89
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312534 straight dowel pin is a precision alignment fastener used in the cylinder head assembly to help locate and position mating components accurately during installation. With a length of 53.5 and an outer diameter of 9, it supports repeatable assembly alignment on T6.420TDI and T6.300 engines for dependable service and correct component seating.
|
$ 54.30
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312537 Mark 1 cylinder head gasket is a precision sealing element for the cylinder head assembly, designed to maintain compression and protect coolant and combustion passages in Nanni marine diesel applications. Built for dependable OEM-style fit, it supports reliable engine operation on T6.420TDI and T6.300 engines.
|
$ 1,935.12
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312541 water outlet gasket is a sealing element for the cylinder head cooling circuit, designed to secure the water outlet joint and help maintain a tight, leak-resistant connection. Used within the cylinder head assembly, it supports stable coolant flow and clean mating surfaces on T6.420TDI and T6.300 engines.
|
$ 39.35
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312571 timing belt cover No. 1 is a protective engine cover for the timing case, designed to shield the timing belt area from debris and spray while supporting clean, reliable operation in marine environments. Built as a direct replacement for Nanni installations, it fits T6.420TDI and T6.300 engines and helps maintain proper protection around the timing drive system.
|
$ 2,350.19
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312572 timing case bolt is a marine-engine fastener designed to secure the timing case assembly for Nanni T6 engines. Used on T6.420TDI and T6.300 engines, it helps keep the timing cover properly clamped in place to support stable alignment and protection of the timing gear area in demanding onboard operating conditions.
|
$ 13.22
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970312573 sealing washer is a compact sealing element used within the timing case and the gear case / rear end plate assemblies to help prevent fluid seepage at bolted joints and pass-through points. Designed for OEM-correct fit on Nanni marine diesel installations, it supports clean, reliable operation on T4.165, T4.180, T4.200, T4.270, T4.230, T4.205 Standard, T6.420TDI, and T6.300 engines.
|
$ 33.06
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.