Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970310920 cord is a small but essential element used within the injection nozzles and pipes system and the nozzle holder and glow plug assembly on Nanni marine diesel engines. Designed for a correct OEM-style fit, it supports tidy, secure installation of related components around the injector and glow plug area on 4.330TDI and 4.340TDI engines.
|
$ 62.68
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310921 injection pump base is a mounting element used within the camshaft injection pump assembly, providing stable support and accurate positioning for the injection pump drive interface. Designed for Nanni 4.330TDI and 4.340TDI marine diesel engines, it helps maintain secure alignment in the camshaft fuel system for dependable fuel delivery timing.
|
$ 424.23
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310922 stud is a precision fastening element used in the camshaft fuel and camshaft injection pump assemblies, helping maintain secure mounting and stable alignment under engine vibration. Designed for OEM fit on Nanni 4.330TDI and 4.340TDI marine diesel engines, it supports reliable retention of related camshaft-driven fuel system components.
|
$ 3.87
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310923 sealing gasket is a precision-fit element used in the camshaft fuel and camshaft injection pump assemblies to help maintain a tight seal at the mating surfaces. Designed for dependable OEM-style replacement, it supports clean, stable operation on Nanni Diesel 4.330TDI, 4.340TDI, and N4.115 engines by helping prevent seepage and preserving proper assembly sealing.
|
$ 37.10
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310926 flange bolt is a precision fastener used within the camshaft fuel and camshaft injection pump groupings, also serving the speed regulator assembly on supported engines. Designed to clamp critical drive and control components securely, it helps maintain stable alignment under marine-engine vibration on 4.330TDI, 4.340TDI, and N4.115 engines.
|
$ 5.40
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310927 injection pump cover is a protective engine component used within the camshaft fuel and camshaft injection pump assemblies to help close and shield the injection pump area. Designed for OEM-fit service replacement, it supports clean, secure assembly on Nanni 4.330TDI, 4.340TDI, and N4.115 marine diesel engines.
|
$ 246.57
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310928 sealing gasket supports leak-free operation within the camshaft fuel and camshaft injection pump assemblies on Nanni marine diesel engines. Designed as an OEM-fit replacement, it helps maintain proper internal sealing where the camshaft-driven fuel system components mate, ensuring clean, reliable operation on 4.330TDI, 4.340TDI, and N4.115 engines.
|
$ 42.88
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310929 oil filter cover is a sealing and retention component used within camshaft and timing gear case assemblies to keep the oil filter housing properly closed and protected. Designed for OEM fit on Nanni Diesel 4.330TDI, 4.340TDI, 5.250TDI, and N4.115 engines, it helps maintain secure oil filtration serviceability and stable lubrication system integrity in demanding marine operation.
|
$ 102.23
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310930 O-ring seal supports leak-free operation in key engine assemblies, used within the camshaft fuel system and camshaft injection pump areas as well as the gear case. Designed as a precise OEM-style sealing element, it helps maintain fluid containment and stable performance on 4.330TDI, 4.340TDI, and N4.115 engines.
|
$ 33.23
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310932 housing assembly is a core structural component within the camshaft fuel and camshaft injection pump system on 4.330TDI and 4.340TDI engines. It supports correct positioning and secure mounting for the camshaft-driven injection pump arrangement, helping maintain stable operation and dependable fuel delivery under marine engine loads.
|
$ 1,184.71
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310934 camshaft fuel plug is a sealing plug used within the camshaft fuel and camshaft injection pump assemblies to close off dedicated ports and help keep the fuel-drive area protected from leakage and contamination. Designed for OEM fit on Nanni marine diesel applications, it suits 4.330TDI, 4.340TDI, and N4.115 engines for dependable service in demanding engine-room conditions.
|
$ 11.38
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310936 camshaft shaft component supports precise mechanical drive within the fuel injection pump camshaft system, helping maintain accurate injection timing and stable engine operation. Used in the camshaft fuel and injection pump camshaft assemblies, it is a direct-fit replacement for Nanni 4.330TDI and 4.340TDI marine diesel engines.
|
$ 2,192.42
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310938 ball bearing is a precision rolling element used in the injection pump camshaft system, supporting smooth camshaft rotation and stable pump timing under marine engine loads. Installed within the camshaft fuel and injection pump camshaft assemblies, it is suited for Nanni 4.330TDI and 4.340TDI engines where dependable, low-friction support helps maintain consistent fuel delivery performance.
|
$ 47.58
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310940 cover is a dedicated protective component for the camshaft-driven injection pump area, used within the camshaft fuel and camshaft injection pump assemblies on Nanni marine diesel engines. Designed for a correct OEM fit on 4.330TDI and 4.340TDI engines, it helps shield internal parts and supports clean, secure assembly of the injection pump drive system.
|
$ 35.19
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310941 camshaft injection pump gasket is a sealing element used in the camshaft fuel system and camshaft injection pump assembly to help maintain tight, leak-resistant joints. Designed for Nanni 4.330TDI and 4.340TDI engines, it supports reliable fuel system operation by sealing mating surfaces within the camshaft-driven injection pump area.
|
$ 36.53
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310942 fastening screw is used within the injection pump camshaft area and related fuel-camshaft assemblies to secure components that drive and time fuel delivery. Installed as part of the camshaft fuel system, the camshaft injection pump assembly, and governor setting hardware, it supports stable alignment and dependable operation on 4.330TDI, 4.340TDI, and N4.115 engines.
|
$ 1.58
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310943 sealing gasket is designed for the camshaft fuel system, fitting the camshaft injection pump assembly to help maintain a tight, leak-resistant joint during engine operation. It supports dependable fuel-system integrity on Nanni Diesel 4.330TDI, 4.340TDI, and N4.115 marine engines where correct camshaft-to-injection-pump sealing is essential for clean, stable running.
|
$ 43.99
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310944 injection pump drive gear is a camshaft-mounted timing component used within the camshaft fuel and camshaft injection pump assemblies to synchronize injection pump operation with engine timing. Built for correct OEM fitment on Nanni Diesel marine engines, it supports accurate fuel delivery timing on 4.330TDI, 4.340TDI, and N4.115 engine installations.
|
$ 629.46
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310946 governor lever fork assembly is a control linkage component used within the governor and speed regulator system to transmit movement accurately for stable engine speed management. Designed for OEM-fit replacement on Nanni Diesel 4.330TDI and 4.340TDI marine engines, it supports smooth regulation response and dependable throttle-to-governor actuation.
|
$ 909.93
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970310951 speed regulator shaft is a precision drivetrain element used within the governor and speed regulator assembly to support smooth, accurate engine speed control. Designed as an OEM replacement, it fits Nanni 4.330TDI and 4.340TDI engines as well as N4.85 and N4.100 engines, helping maintain stable regulation response under changing marine loads.
|
$ 31.65
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.