Jabsco D3231B1311AR - Flojet Duplex II Diaphragm Pump 24V 1.5GPM B/B NSW BP50 R

Article YS-JD3231B1311AR

1-2 weeks delivery time
Price incl. 19% VAT

ASK FOR QUOTE

Our managers will contact you and clarify the terms of the order

The Flojet Duplex II Diaphragm Pump D3231B1311AR is a durable and efficient 24V DC pump with a polypropylene body, Buna diaphragm, and Buna check valve. It includes a 50 PSI pressure bypass and is self-priming up to 8 feet. Designed for medium pressure applications, it should be installed in a dry, well-ventilated area and protected from environmental factors. The pump operates intermittently, with a maximum temperature limit of 140°F, and is not suitable for flammable fluids or explosive environments.

Description
Ask a Question

Jabsco D3231B1311AR - Flojet Duplex II Diaphragm Pump 24V 1.5GPM B/B NSW BP50 R

The Flojet Duplex II Diaphragm Pump is engineered for efficiency and durability. This model, the D3231B1311AR, features a robust polypropylene body and utilizes a Buna diaphragm and Buna check valve. Designed for medium pressure applications, it includes a 50 PSI pressure bypass and operates with a 24 Volt DC motor. The pump's ports are 3/8 inch NPT female for both inlet and discharge.

With its advanced diaphragm and valve designs, the Flojet Duplex II is capable of achieving higher dry vacuum levels. It is self-priming up to 8 feet (2.4 meters) and can run dry without damage. The pump should be installed in a well-ventilated, dry area. If used outdoors, it must be protected from water, dust, sunlight, and wash down spray. The built-in external bypass system handles internal flow when pressure exceeds 50 PSI, making it suitable for high-pressure operations across a range of flow rates. Note that this pump is not designed for continuous duty due to its motor brush life limitations, though operation at lower pressures and temperatures can extend its service life.

This pump features a Permanent Magnet motor with a solid state rectifier and full RFI suppression, designed for intermittent duty cycles with short continuous operation permissible. It is crucial to avoid using this pump for flammable fluids or in explosive environments, and it should not exceed a maximum temperature of 140°F.

Ask a Question

Question *

Name *

Contact number

E-mail *

I agree to the processing of personal data