Jabsco 30550-2105 - Sanitary Stainless Steel Pump End Only

Jabsco 30550-2105 - Sanitary Stainless Steel Pump End Only

Jabsco 30550-2105 is a 316 stainless steel Flexible Impeller pump with a Neoprene Impeller, Tungsten Carbide/Nitrile Mechanical Seal, 1 Inch ACME Threaded Ports with Bevel Seat, replacement pump end only without a Motor. The Tungsten Carbide Seal variation in this pump is used for pumping liquids that contain abrasives or are highly corrosive. Self-priming primes at low or high speeds. For vertical dry suction lift of 6 feet (EPDM impeller), a minimum of 860 RPM is required. Pump will produce suction lift up to 22 feet when wet. Temperatures the operating temperature limits of the pump depend on the impeller compound. The following ranges apply: EPDM impeller - 45 degrees to 185 degrees F (7 degrees to 85 degrees C). These hygienic flexible impeller pumps are especially useful where self-priming is required and are also very effective in pumping viscous or air-entrained food, cosmetic and pharmaceutical products. At lower speeds, they also handle delicate liquids very well owing to their gentle pumping action. Jabsco hygienic flexible impeller pumps handle low and high-viscosity liquids, gels and pastes and can pass suspended soft and hard solids with minimal damage. Virtually any liquid with viscosity up to 20,000 centipoise can be pumped as long as there is chemical compatibility with the pump materials. The output flow is smooth, steady and totally pulsation-free and their gentle pumping action will not breakdown shear-sensitive or fragile liquids. Designed to be cleaned in place or easily strip-cleaned, Jabsco flexible impeller pumps frequently offer a more suitable and cost-effective alternative to many other pump types.

Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller.