Jabsco 30530-0011 - Stainless Steel Pedestal Pump

Jabsco 30530-0011 - Stainless Steel Pedestal Pump

The Jabsco 30530-0011 is a robust and durable pedestal pump designed for high-pressure applications. Constructed from 316 stainless steel, this pump features a high-pressure Neoprene impeller and a Carbon/Ceramic mechanical seal. It is equipped with 1-1/2 inch NPT internal ports and is offered as a bare shafted pedestal pump end only, without a motor.

This pump is ideal for scenarios requiring either single or variable speed operation, particularly when the benefits of 316 stainless steel are needed. It is self-priming and capable of handling flow rates up to 50 GPM (189 LPM), making it suitable for both low and high-speed priming. For a vertical dry suction lift of up to 10 feet (3 meters), a minimum speed of 860 RPM is required. When wet, the pump can achieve a suction lift of up to 22 feet (6.7 meters). Ensure that suction lines are airtight to maintain self-priming capabilities.

The Jabsco 30530-0011 relies on the pumped liquid for lubrication. Avoid running the pump dry for more than 30 seconds, as this can damage the impeller. The operational temperature range for the Neoprene impeller is between 45°F and 180°F (7°C to 82°C). This impeller type is well-suited for water and general-purpose pumping applications.

For pedestal mount models operating at 1750 RPM, a 7.5 HP motor is recommended to match the high-pressure impellers, along with an appropriate service factor. High-pressure impellers require a motor that provides a minimum of 26 ft-lbs of torque for forward operation and 40 ft-lbs for reverse operation.

Please note: this pump should not be used to pump gasoline or other flammable liquids, and it should not be operated dry.