Jabsco 18690-0010 - Self-Priming Ac Macerator Pump 115v Hd 3"

Article YS-J18690-0010

1-2 weeks delivery time
Price incl. 19% VAT

ASK FOR QUOTE

Our managers will contact you and clarify the terms of the order

Jabsco 18690-0010 is a self-priming AC macerator pump that is perfect for handling waste in marine, recreational vehicle, and domestic settings. With its Nitrile Impeller, Lip Type seal, and 115 Volt AC motor, this pump can easily grind waste down to a particle size of 1/8 Inch, making it simple to pump through a 1 Inch hose discharge line. Its self-priming feature allows for easy installation and convenience. Keep in mind to not run the pump dry for more than 30 seconds to avoid damaging the impeller and pump components.

Description
Ask a Question

Jabsco 18690-0010 - Self-Priming Ac Macerator Pump 115v Hd 3"

Jabsco 18690-0010 is a self-priming AC macerator pump with a Nitrile Impeller, Lip Type seal, 3 Inch Hose Inlet and 1 Inch Hose Outlet Ports, coupled to a 115 Volt AC, Single Phase, 60 HZ Motor. This macerator pump has Stainless Steel wearplates, with a Stainless Steel Cutter Plate that reduces the particle size to 1/8 Inch (3.17 mm) maximum. The Jabsco 18690-0000 AC macerator pump unit is the ideal answer to waste handling problems for marine, recreational vehicle and domestic uses. The macerator section grinds waste down to a particle size of 1/8 Inch maximum so it can be pumped easily through a 1 Inch hose discharge line. The pump is self-priming, permitting the unit to be mounted above or below the tank in a convenient location.

For optimal efficiency, locate pump as close to waste source as practical. Empties a 30 gallon holding tank in only 3 minutes. The 18690-0000 waste pump will macerate and pump all waste and tissue normally found in marine waste systems. It will NOT handle hard solid objects, sanitary napkins or rags. This unit depends on liquid pumped for lubrication. Do Not Run Dry for more than 30 seconds. Lack of liquid will damage the impeller and the pump components. This pump has a nominal flow rate of 14.0 GPM, and is self-priming to a six foot lift and may be located at any convenient point in the waste discharge system. Be sure suction lines are airtight or pump will not self-prime.

Ask a Question

Question *

Name *

Contact number

E-mail *

I agree to the processing of personal data