Jabsco 18660-0121 - Water Puppy Bilge Pump 12V

Jabsco 18660-0121 - Water Puppy Bilge Pump 12V

The Jabsco 18660-0121 Water Puppy Bilge Pump is a compact, high-performance pump designed for various marine applications such as bilge pumping, livewell circulation, and washdown systems. With its 12V motor, this self-priming pump offers reliability and efficiency in pumping water, even in challenging conditions. Its robust construction and neoprene impeller ensure long-lasting performance in marine environments, handling both hard and soft solids without clogging. This pump is built for ease of installation and maintenance, making it a popular choice for recreational and commercial boat owners.

Key Features:

• Self-priming, capable of lifting up to 4 feet (1.2 meters) without priming.
• Handles up to 20 feet (6 meters) of total head when primed, with a pressure limit of 8.7 psi.
• Durable bronze construction for corrosion resistance in marine environments.
• Equipped with a neoprene impeller for effective fluid transfer and reliable operation.
• Motor is a permanent magnet type with a fully enclosed stainless steel shaft, meeting USCG Electrical Standards 183.410 and ISO 8846 for ignition protection on gasoline-powered vessels.
• Ports include internal 1/2" pipe threads and external 1" hose barb, with an adapter for 3/4" garden hose fittings.
• Compact size (3" high, 6-3/8" long, 4-3/4" wide) and lightweight (approx. 4-1/2 lb or 2 kg).
• Easy to install and service with the option to rotate the pump head 180° to change the flow direction.
• Operating temperature range of 45°F to 180°F (7°C to 82°C) for diverse environmental conditions.
• Explosion proof motor and protection against ignition risks make it suitable for gasoline-powered vessels.

Specifications:

• Model: Jabsco 18660-0121 Water Puppy Bilge Pump
• Motor: Permanent magnet type with stainless steel shaft
• Power Supply: 12V DC
• Weight: 4-1/2 lb (2 kg)
• Material: Bronze body, neoprene impeller
• Ports: 1/2" internal pipe threads, 1" external hose barb
• Adapter: 3/4" external garden hose thread
• Maximum Total Head: 20 feet (6 meters)
• Flow Rate: 6.3 GPM at 5 feet (1.5 meters) of head
• Self-Priming: Up to 4 feet (1.2 meters)
• Operating Pressure: Up to 8.7 psi
• Operating Temperature: 45°F - 180°F (7°C - 82°C)
• Electrical Standards: Meets USCG 183.410 and ISO 8846 Marine for ignition protection
• Fuse Size: 15 Amp
• Electrical Connections: Proper wire size required, as per specifications
• Efficiency: Non-pulsating flow for smoother operation
• Power Cord: 12-foot cable for extended reach
• Seal Type: Lip seal for reliability in harsh environments
• Impeller: Neoprene compound for reliable fluid transfer

Installation and Usage:

• Mount the pump in a dry, well-ventilated location to avoid motor damage from moisture.
• Ensure suction lines are airtight for faster priming and prevent air locks.
• The pump should not be run dry to avoid damage to the impeller.
• Recommended for bilge pumping, washdown, and livewell circulation systems.
• Wet the impeller before use to ensure proper priming and extend its lifespan.

Warnings and Safety:

• Explosion hazard: Do not use the pump with gasoline, solvents, or other flammable liquids.
• Light housing gets hot during operation—avoid contact to prevent burns.
• Motor temperature reaches 180°F (82°C); prolonged contact may cause burns.
• Ensure all wiring connections are secure to prevent sparks and potential explosions.
• Be cautious of high-pressure operation and avoid operating with closed discharge nozzles.

Applications:

• Marine bilge pumping systems
• Livewell circulation
• Washdown applications
• General water pumping needs for boats and marine vessels