|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco RLFP222202E Fresh Water Pump is a reliable choice for your water system needs, boasting a flow rate of 1 gallon per minute and capable of handling up to 40 PSI. This 24 Volt DC pump features self-priming technology for easy startup and operation, along with 3/8 inch hose barb inlet and outlet ports for flexible connectivity. Constructed from durable polypropylene, it includes thermal overload protection and a pressure switch for added safety and control.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-4101 is a durable pump and motor unit made from 316 stainless steel, featuring a neoprene impeller and tungsten carbide seal. It operates with a 1-1/2 horsepower, 115/230 volt TEFC motor and has 1-inch NPT ports. This self-priming pump is effective at both low and high speeds, with a maximum suction lift of 22 feet when wet. It handles liquids with viscosities up to 20,000 cps and is suitable for corrosive chemicals and viscous substances. Note that running the pump dry for more than 30 seconds can damage the impeller and seal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Jabsco RLFP222202S Pump - the perfect solution for all your pumping needs. With a powerful 24V motor and 2C design, this pump is ideal for both commercial and residential use. Its compact size and efficient performance make it a must-have for any pumping project. Trust Jabsco for reliable and high-quality pumps.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-4103 Stainless Steel Pump Head Kit is a durable and efficient solution for various applications. Featuring an epoxy plastic body, epoxy-coated cast iron pump/motor adapter, nitrile impeller, and tungsten carbide seal, it ensures reliable performance. The pump uses motor bearings, has an epoxy plastic-covered stainless steel shaft, and a 1" NPT internal port, operating at standard pressure. Its design allows for easy maintenance, tolerance to abrasive wear, handling of hard and soft solids without clogging, and non-pulsating flow.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco RLFP222702V is an efficient and versatile pump that is perfect for handling a variety of liquids. With a powerful electric motor, a compact design, and reliable features such as thermal overload protection and a pressure switch, this pump is a top choice for your pumping needs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-4104 stainless steel pump head kit is designed for durability and reliability, featuring epoxy plastic body materials, an epoxy-coated cast iron pump/motor adapter, Viton impeller, tungsten carbide seal, motor bearings, and an epoxy plastic covered stainless steel shaft. It supports a 1" NPT internal port type and standard pressure, providing easy maintenance, tolerance to abrasive wear, and the ability to handle hard and soft solids without clogging, ensuring a smooth, non-pulsating flow.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Jabsco 50087-0000 - 1" Bronze Pump Shaft: a durable and high-quality pump shaft crafted from bronze for reliable performance in tough conditions.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Jabsco RLFP2X003D - LFP 24V S/E 2C SW20 PLT pump. With a supply voltage of 24 volts DC and a maximum pump pressure of 1.38 bar, this electric motor drive pump is a versatile choice for any project. It also features self-priming capabilities and overload protection for safe and reliable operation. Add it to your toolkit today!
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-5001 is a versatile epoxy plastic pump featuring a neoprene impeller and a carbon/ceramic mechanical seal, designed for single and variable speed operations. It includes a 1-1/2 horsepower, 1740 RPM motor operating on 115/230 volts, with 1 inch NPT internal ports. This self-priming pump can handle a vertical dry suction lift of up to 10 feet and a wet suction lift of up to 22 feet, with a flow rate of 22 gpm. It is essential to maintain lubrication with the pumped liquid to prevent damage to the impeller, which operates efficiently within a temperature range of 45°F to 180°F. The motor is not explosion-proof, and the pump should not be run dry for more than 30 seconds.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-5003 is a robust epoxy plastic pump featuring a nitrile impeller, carbon/ceramic mechanical seal, and 1-inch NPT internal ports, coupled with a 1-1/2 horsepower, 1740 RPM, 115/230 volts, single-phase TEFC motor. This self-priming pump delivers a 22 GPM flow, tolerates debris, and can achieve up to 22 feet of suction lift when wet. It operates within a temperature range of 50°F to 180°F, suitable for oil-based products. Ensure airtight suction lines for optimal performance and avoid running the pump dry for more than 30 seconds to prevent impeller damage.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Rule RM1100B is a compact, fully automated bilge pump designed for smaller vessels. It features compatibility with 25mm or 29mm bore hose straight outlets, a durable plastic body, and measures 112mm high, 130mm long, and 73mm wide. With a 7.5 amp fuse size, it can pump up to 69 liters per minute, with a maximum discharge head of 2 meters. Key features include backflow prevention, air vents to prevent air locks, a quick-release inlet strainer, low amp draw, and ignition protection. Packaged dimensions are 18.00 cm by 8.00 cm by 20.00 cm, and it weighs 0.48 kg.
|
€ 179,33
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Jabsco 50197-0100 Shaft 040: a high-quality, durable shaft designed for optimal performance, built to withstand rigorous use and provide reliable operation for your machinery. Trust Jabsco for all your shaft needs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-5004 is a high-quality epoxy plastic pump featuring a Viton impeller and carbon/ceramic mechanical seal, coupled with a 1-1/2 horsepower, 1740 RPM, 115/230 volts, single-phase TEFC motor. It has a 1-inch NPT internal port, self-priming capability with a 22 gpm flow rate, and can handle debris. It offers a vertical dry suction lift of up to 10 feet at 860 RPM and a suction lift of up to 22 feet when wet. The pump relies on the liquid being pumped for lubrication and should not be run dry for more than 30 seconds to avoid impeller damage. Operating temperature limits for the Viton impeller range from 60°F to 180°F, suitable for hydrocarbons and most solvents. The motor is not explosion-proof.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Rule RM1100B-24 is a compact and fully automated bilge pump designed for smaller vessels. It features a tough plastic body, back flow prevention, and air vents to prevent air locks. With a low amp draw and ignition protection, this pump is a reliable and essential piece of equipment for any boater.
|
€ 183,72
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-5101 is an epoxy plastic pump with a Neoprene impeller and Tungsten Carbide/Ceramic seal, designed for reliable performance. It features a 1-1/2 horsepower motor running at 1740 RPM and operates on 115/230 volts, single-phase. With 1-inch NPT internal ports, it self-primes at various speeds, achieving up to 22 feet of suction lift when wet. The pump is suitable for water and general-purpose use, but should not run dry for more than 30 seconds, and is not explosion-proof.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Rule RM500B - Rule-Mate 500 Submersible 12V is a compact, fully automated bilge pump designed for smaller vessels. It features a durable plastic body, integral sensor with a backup dry running prevention mode, and a low amp draw for battery conservation. With a capacity of up to 31 liters per minute, backflow prevention, air vents to avoid air locks, and a quick release inlet strainer for easy cleaning, this pump is both efficient and reliable. It connects to a 19mm bore hose, has dimensions of 112mm x 130mm x 73mm, and is protected against ignition and thermal overload.
|
€ 109,31
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-5103 is a durable epoxy plastic pump with a nitrile impeller and tungsten carbide/ceramic seal, paired with a 1-1/2 horsepower motor. It features 1-inch NPT internal ports, self-priming capability, and a maximum flow rate of 22 gallons per minute. Designed for use with oil-based or corrosive fluids, it can achieve a suction lift of up to 22 feet when wet. The pump should not run dry for more than 30 seconds, as it relies on the pumped liquid for lubrication.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Rule-Mate 500 Submersible 24V - the ultimate bilge pump for smaller vessels. With a maximum output of 31 litres/minute and a recommended discharge head of 2m, this fully automated pump comes equipped with an integral sensor and a back-up feature for added safety. Its compact size, tough plastic body, and low amp draw make it the perfect choice for any marine environment.
|
€ 126,67
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30520-5104 is a durable epoxy plastic pump with a Viton impeller and tungsten carbide/ceramic seal, designed for handling abrasive and corrosive fluids. It features 1-inch NPT ports and is powered by a 1-1/2 horsepower motor operating at 1740 RPM, suitable for 115/230 volts and 60Hz. The pump offers a flow rate of 22 gallons per minute, is self-priming, and supports a vertical dry suction lift of up to 10 feet, with a maximum suction lift of 22 feet when wet. It should not run dry for more than 30 seconds to prevent impeller damage and operates within a temperature range of 60°F to 180°F.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Jabsco 30530-0001 is a durable 316 stainless steel pedestal pump designed for versatile use. It features a Neoprene impeller, carbon/ceramic mechanical seal, and 1-1/2 inch NPT ports. This self-priming pump handles flows up to 50 GPM and provides suction lifts of up to 22 feet. It operates effectively within a temperature range of 45°F to 180°F, but should not be run dry or used with flammable liquids.
|
Our managers will contact you and clarify the terms of the order
| ||
