BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 530Q9972 water pump shaft seal is a dedicated sealing component for the circulation pump on BUKH DV36 and DV48 marine diesel engines. Designed to seal around the pump shaft, it helps keep coolant contained within the pump housing, supporting reliable coolant circulation and protecting the pump and surrounding engine compartment from leaks.
|
$ 94.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 530Q9975 water pump sealing ring is a 5/8 in seal designed to help maintain a tight, leak-resistant joint in the water pump assembly. Supplied as an OEM replacement and cross-referenced from older part number 530Q9971, it supports reliable coolant circulation by keeping the pump properly sealed under marine operating conditions.
|
$ 163.97
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0051 banjo-style hollow bolt is made to secure banjo fitting connections within the air inlet and turbocharger assembly on BUKH DV48 marine diesel engines. It provides a dependable fastening point for routed lines, helping maintain a clean, service-friendly installation and reliable engine operation under marine duty.
|
$ 7.41
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0052 banjo bolt is a hollow fastener designed to secure banjo-style line connections on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used within the cylinder head and valve gear and also in the camshaft and lubrication system around the lubricating oil pump and oil filter, it helps maintain a secure, correctly routed fluid connection for dependable engine operation.
|
$ 13.53
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0053 banjo bolt is a hollow bolt used to secure banjo-style fuel connections across the BUKH DV-series, supporting clean, leak-resistant routing between components such as the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe. It is also used on DV36 and DV48 applications around the injection pump and oil cooler, as well as the rear-end rotating weight and fuel lift pump assembly, making it a versatile OEM-style fastener for service and rebuild work.
|
$ 7.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0054 banjo bolt is a hollow fuel and oil line fastener used on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Fitted across key fuel system connection points—such as the fuel filter, fuel injection pump, fuel lift pump, and fuel pipes—and also used on DV48 lubrication pump pipework, it helps secure banjo-style line fittings for dependable fluid flow in demanding marine service.
|
$ 9.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0055 banjo bolt is a dedicated fuel-line fastener used on the rear-end rotating weight and fuel lift pump arrangement for BUKH DV36 and DV48 marine diesel engines. It secures the banjo fitting connection to support a tight, reliable fuel feed interface and help maintain consistent lift-pump supply in marine operating conditions.
|
$ 42.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0056 banjo bolt is a hollow fastening component used in the BUKH DV48 air inlet and turbocharger assembly. Designed to clamp a banjo-style connection securely, it helps maintain a stable, leak-resistant joint where the related line interfaces with the turbocharger system.
|
$ 22.29
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0072 banjo bolt is a dedicated fastener for the ring hose connection on BUKH DV10LME marine engines. Supplied as a direct replacement for the earlier article number 008E2003, it secures the hose fitting to help maintain a tight, reliable fluid-line joint in the engine’s hose assembly.
|
$ 12.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0160 banjo-bolt fastener is built for the air inlet and turbocharger system on BUKH DV32 and DV48 marine diesel engines. Designed to secure a banjo-style fluid connection, it helps maintain a tight, stable joint in the turbocharger area where vibration and heat demand dependable sealing and retention.
|
$ 20.88
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0170 banjo bolt is a fuel-system fastener designed to secure banjo-style fuel line connections on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used across the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe connections, it supports a tight, reliable joint while allowing controlled fuel flow through the fitting.
|
$ 34.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0190 banjo bolt is a hollow through-bolt designed for banjo-style line connections on the injection pump and oil cooler on BUKH DV36 and DV48 marine diesel engines. It secures the fitting while allowing fluid to pass through the bolt, helping maintain clean, reliable flow in critical engine circuits.
|
$ 36.15
-
+
| ||
|
1-2 weeks delivery time The Bukh 531Z0221 pipe bushing is a precision-fit support component used in the cylinder head and valves assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps locate and stabilize a pipe interface in the cylinder head area, promoting secure routing and dependable operation in a high-temperature, high-vibration environment.
|
$ 38.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 532C0291 inlet pipe and elbow fitting supports dependable fluid routing on BUKH DV36 and DV48 marine diesel engines. Used in the inlet pipe arrangement for the injection pump and oil cooler as well as the keel-cooling elbow connection, this part helps maintain correct flow paths for stable cooling and lubrication performance in marine service.
|
$ 163.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 532R1010 hexagon nipple is a threaded connection fitting used on the DV36 suction pump and on the rear-end rotating weight and fuel lift pump assemblies for BUKH DV36 and DV48 marine diesel engines. Its hex body allows secure tightening, helping maintain a dependable line connection for stable fuel supply and service-ready installation.
|
$ 15.29
-
+
| ||
|
1-2 weeks delivery time The Bukh 532V0040 hose nipple is a connection fitting used on the air inlet filter assembly for BUKH DV24RME marine diesel engines. It provides a secure hose-to-filter interface to support clean, stable airflow into the engine intake system, helping maintain dependable running conditions in marine service.
|
$ 16.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 532V0331 elbow hose nipple is a right-angle hose connection used in the keel cooling system on BUKH DV36 and DV48 marine diesel engines. Designed to route coolant hoses cleanly in tight engine-room spaces, it helps maintain secure hose runs and dependable coolant flow through the keel cooling circuit.
|
$ 40.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 532V0335 elbow hose nipple is a compact angled connector used in the keel cooling system on BUKH DV36 and DV48 marine diesel engines. Designed to guide coolant hose routing where space is tight, it supports secure hose connections and smooth coolant flow through the keel cooling circuit for dependable temperature control underway.
|
$ 62.69
-
+
| ||
|
1-2 weeks delivery time The Bukh 532V0434 elbow nipple is a right-angle connection fitting for BUKH DV10LME marine diesel engines, used to route fluid lines cleanly where space is tight. Its elbow design helps create a secure, orderly hose or pipe run while supporting dependable flow through the connected engine system.
|
$ 51.44
-
+
| ||
|
1-2 weeks delivery time The Bukh 532V0665 oil suction pipe nipple is a dedicated connection piece for the oil suction system on BUKH DV36 marine diesel engines. Designed to provide a secure flow path in the lubrication circuit, it supports dependable oil pickup and stable engine lubrication in continuous marine operation.
|
$ 30
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.