BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 39110-3AM60 waterjet ECU is a dedicated electronic control unit for BUKH S270J marine engines, supplied as part of the ECU and case assembly. It supports reliable management of the waterjet-related control functions, helping maintain consistent system response and dependable operation in marine duty.
|
$ 5,346.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 39113 inlet valve is a precision valvetrain component for BUKH DV10 and DV20 marine diesel engines, designed to control and seal incoming air during the intake cycle. Replacing a worn valve helps restore proper cylinder sealing, supports stable combustion, and maintains consistent engine performance.
|
$ 195.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 39180-2F600 crankshaft position sensor provides accurate crankshaft speed and position feedback for BUKH R210J marine diesel engines. Installed in the crankshaft and piston assembly area, it supports stable engine operation by supplying essential timing information to the engine’s control and monitoring functions.
|
$ 173.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 39180-3A000 crankshaft position sensor provides accurate engine speed and crank position feedback for BUKH S270J marine diesel engines. Installed at the bell housing on both sterndrive and shaft or jet propulsion setups, it supports stable engine monitoring and reliable signal input for correct timing and smooth operation.
|
$ 196.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 39190-2F000 encoder sensor is a crankshaft and piston system component for BUKH R210J marine diesel engines, designed to provide a reliable rotational reference signal for engine monitoring and timing-related functions. Built for marine-duty operation, it supports consistent running and dependable feedback from the crankshaft area.
|
$ 168.32
-
+
| ||
|
1-2 weeks delivery time The Bukh 39200-2F000 boost pressure sensor provides accurate intake manifold pressure feedback for BUKH R210J and S270J marine diesel engines. Installed on the intake manifold, it supports correct boost monitoring to help the engine maintain responsive performance and stable operation under varying load and sea conditions.
|
$ 181.74
-
+
| ||
|
1-2 weeks delivery time The Bukh 39220-38030 water temperature sensor monitors coolant temperature in the coolant pipe and hose assembly on BUKH R210J and BUKH S270J marine diesel engines. It provides the engine’s instrumentation and protection systems with accurate temperature input to support correct warm-up, stable operation, and timely overheat warning response.
|
$ 85.64
-
+
| ||
|
1-2 weeks delivery time The Bukh 39300-2F000 camshaft position sensing unit is designed for BUKH R210J marine diesel engines and mounts at the rocker cover area. It supplies the engine with camshaft position feedback to support accurate timing and stable operation, making it a dependable OEM replacement for service and repair work.
|
$ 164.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 39316-3C010 flange bolt is a camshaft fastener for BUKH S270J marine diesel engines, built to secure camshaft-related components with a stable, vibration-resistant hold. It supports correct alignment within the valve train assembly and helps maintain dependable timing performance in continuous marine operation.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 39340-26010 intake air temperature sensor supports accurate engine monitoring on BUKH R210J marine diesel engines by measuring intake-air temperature at the intake manifold. Reliable sensor input helps the engine’s control and instrumentation respond correctly to changing air conditions, promoting smooth operation and consistent performance.
|
$ 54.47
-
+
| ||
|
1-2 weeks delivery time The Bukh 39350-3A000 camshaft position sensor is a precision engine timing component for BUKH S270J marine diesel engines, installed on the camshaft. It provides the engine’s control system with accurate camshaft position feedback to support stable starting, smooth running, and consistent combustion timing under marine operating loads.
|
$ 243.12
-
+
| ||
|
1-2 weeks delivery time The Bukh 39816 flange is a marine-grade connection component designed to join mating parts securely in Bukh onboard systems. It supports accurate alignment and a stable interface between assemblies, helping maintain a dependable installation in vibration-prone engine-room conditions.
|
$ 62.84
-
+
| ||
|
1-2 weeks delivery time The Bukh 40477 freeze stopper (22 mm diameter) is a sealing plug used in the engine block or cooling jacket to close a machined bore and keep the cooling system watertight. It helps protect the engine’s internal coolant passages from leaks and supports dependable temperature control in marine service.
|
$ 8.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 41851 base gasket is a sealing element for the thermostat housing, designed to create a tight joint at the housing base to prevent coolant leaks and maintain stable temperature control. Used in the engine cooling system, it supports reliable thermostat operation by keeping the coolant circuit properly sealed.
|
$ 5.37
-
+
| ||
|
1-2 weeks delivery time The Bukh 43153-7H000 flange bolt is a dedicated fastening component for the intercooler assembly on BUKH R210J marine diesel engines. It helps secure intercooler connections where a flanged head is used to spread clamp load, supporting a stable installation that resists loosening under vibration and thermal cycling.
|
$ 4.42
-
+
| ||
|
1-2 weeks delivery time The Bukh 50000-12206 insulating washer is a protective hardware element used in the insulated system on BUKH S270J marine diesel engines. It helps isolate components at the mounting point, supporting secure assembly while reducing unwanted electrical contact and vibration transfer in critical engine installations.
|
$ 19.42
-
+
| ||
|
1-2 weeks delivery time The Bukh 500C2310 set screw is a DIN-standard fastener used in the cylinder head and valve assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps secure critical top-end components against vibration and thermal cycling, supporting a stable valve train and dependable engine operation.
|
$ 2.84
-
+
| ||
|
1-2 weeks delivery time The Bukh 500C2311 set screw (M6x16, DIN 933, strength class 8.8) is a dependable marine fastener used across multiple BUKH engine assemblies, including raised hand starting systems and the air inlet and turbocharger installation. Designed for secure clamping and vibration-resistant retention, it supports correct alignment and stable mounting on BUKH DV24RME, DV29RME, DV32, and DV48 engines.
|
$ 3.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 500C2359 M8x12 set screw provides secure fastening for the rear-end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. Manufactured to DIN 933 strength class 8.8, it helps maintain stable component alignment under vibration and load for dependable operation.
|
$ 2.84
-
+
| ||
|
1-2 weeks delivery time The Bukh 500C2361 M8x16 set screw to DIN 933 strength class 8.8 is a dependable fastening component used across multiple BUKH DV engine assemblies, including electric start and electric mains installations as well as rear-end rotating weight and fuel lift pump mounting points. Designed for secure clamping and retention, it helps keep critical marine engine components firmly fastened under vibration and continuous operation on DV24RME, DV29RME, DV32, DV36, and DV48 engines.
|
$ 2.84
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.