BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 610E0500 pipe element is a two-circuit system line component designed for BUKH DV36 and DV48 marine diesel engines. Installed within the two-circuit cooling arrangement, it supports controlled coolant flow between connected sections of the system, helping maintain stable operating temperature and reliable heat management underway.
|
$ 2,274.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0074 lid is a protective cover component used to close off its designated opening in a Bukh assembly, helping keep internal parts shielded from splash, dirt, and accidental contact in marine service. It is suited for replacement where an OEM-style lid is required to restore proper enclosure and secure fit.
|
$ 48.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0075 shaft is a rotating drivetrain component for Bukh marine engine installations, designed to transmit torque smoothly and maintain accurate alignment in the shaft system. It is a practical replacement choice when restoring reliable power transfer and reducing wear across connected rotating parts.
|
$ 152.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0092 impeller is a replacement pump rotor designed to restore reliable water flow in marine engine support systems. Supplied as the requested alternative to replacement item 09-806B-1, this Bukh impeller helps maintain consistent circulation and dependable operation when renewing worn pump internals.
|
$ 69.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0104 water pump cover is a 4-hole cover plate designed to close and protect the water pump assembly on BUKH marine engines using this mounting pattern. It supports correct pump operation by securing the pump housing and helping maintain a controlled cooling-water circuit in demanding onboard conditions.
|
$ 48.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0105 shaft is a precision drivetrain component (reference 01-45175) designed to transmit rotational force within a Bukh marine assembly. Ideal for service replacements, it helps restore smooth, dependable power transfer and supports stable operation of the equipment it is installed in.
|
$ 236.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0106 comb is a genuine Bukh component intended for Bukh applications where a comb element is required. Supplied under the Bukh part number for dependable fit and straightforward replacement in service and maintenance contexts.
|
$ 103.81
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0107 rifled bushing is a precision support sleeve designed to help maintain correct alignment and smooth operation where a shaft or moving component runs in a bore. Used as a wear surface in BUKH engine assemblies, it helps reduce play, supports consistent running clearances, and contributes to reliable long-term service.
|
$ 126.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0109 retaining ring is a locking ring designed to secure fitted components in place and help prevent unintended movement during engine operation. Used as a dependable mechanical locking element, it supports stable assembly retention where a positive ring-type stop is required.
|
$ 10.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0121 impeller is a seawater-pump pumping element designed to restore dependable raw-water flow in Bukh marine engine cooling systems. Replacing a worn impeller helps maintain steady seawater circulation through the heat exchanger circuit, supporting stable operating temperature and reducing the risk of overheating underway.
|
$ 106.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0122 sealing gasket is a replacement seal intended for Bukh engine service work, helping maintain tight, leak-resistant joints between connected components. Used during maintenance and reassembly, it supports clean operation by keeping fluids and pressure where they belong in the engine system.
|
$ 6.44
-
+
| ||
|
1-2 weeks delivery time The Bukh impeller is designed for marine engine cooling pump service applications.
|
$ 82.75
-
+
| ||
|
1-2 weeks delivery time The Bukh gasket is designed for marine engine sealing and service applications.
|
$ 6.44
-
+
| ||
|
1-2 weeks delivery time The Bukh shaft is designed for marine engine mechanical drive and service applications.
|
$ 256.27
-
+
| ||
|
1-2 weeks delivery time The Bukh cover is designed for marine engine protection and maintenance applications.
|
$ 154.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0222 comb element is a 3.1 mm component used in the seawater cooling assembly on BUKH DV36 engines. Designed to sit within the seawater cooling system, it helps keep cooling components properly positioned and supports steady water flow for dependable temperature control in marine operation.
|
$ 90.79
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications.
|
$ 21.70
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0225 fastening screw is a genuine Bukh replacement fastener designed to secure engine and onboard system components with a reliable, vibration-resistant hold. Ideal for service work and repairs, it helps maintain correct assembly integrity where an OEM screw is required.
|
$ 37.78
-
+
| ||
|
1-2 weeks delivery time The Bukh sea water pump is designed for direct marine engine cooling system applications.
|
$ 1,586.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0292 water pump shaft is a new replacement component for the water pump on BUKH DV36 marine diesel engines. It supports smooth, dependable pump operation by transmitting drive through the pump assembly, helping maintain steady coolant circulation for reliable engine temperature control.
|
$ 874.01
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.