Vetus WWCP Waste Water System Control Panel

Article YSWWCP

€ 431,54

1-2 weeks delivery time
Price incl. 19% VAT

- +

Add to cart

This panel allows you to control the waste water system. It indicates the level of waste water in the tank and allows you to control the pump automatically or manually.

Description
Ask a Question

Waste Water System Control Panel, Vetus WWCP. This panel allows you to control the waste water system. It indicates the level of waste water in the tank and allows you to control the pump automatically or manually. The panel receives a signal from the level sensor and shows the filling of the tank by 25%, 50%, 75% and 100% using LEDs. When the maximum level is reached, the LED flashes. The panel is interlocked to prevent accidental activation of the pumping pump. After entering a special code, the pump can be turned on either automatically or manually. In automatic mode, the pump will empty the tank when it is full. The panel has an additional output, which can, for example, be supplied to a relay, which, if necessary, breaks the supply circuit of the toilet or pump. The panel may also be connected to an RC valve which will open before the pump is turned on. The panel has a special LED that lights when the valve is closed (if it is installed). When the tank is empty, the pump will turn off automatically so as not to work dry. The panel will not respond to intermittent intermittent tank fill signals caused by rolling.

The panel is supplied without a pump, valve and sensor, which are ordered separately.

Specifications:
- Voltage: 12V or 24V
- Current consumption: 4 mA
- Standby panel: 10A max
- Electric pump: 5A max
- RC valve: 1A max
- Level sensor: WSENSORA or SENSORA
- Dimensions: 85 x 85 mm
- Depth: 40mm

Ask a Question

Question *

Name *

Contact number

E-mail *

I agree to the processing of personal data