Marine plumbing fittings are essential components for maintaining reliable water flow and connections on boats. These fittings, including pipe to hose adapters, hose barbs, and thru-hull fittings, ensure secure and leak-resistant plumbing systems for onboard freshwater, fuel, and drainage applications. Marine plumbing fittings also include various pipe fitting and drain components that contribute to a well-functioning onboard system. High quality hardware, such as threaded connectors and barbed fittings, ensures secure and efficient water flow for drainage and supply lines. Regular replacement of worn or corroded fittings is essential to maintain the integrity of the plumbing system, preventing leaks and ensuring long-term reliability in marine environments.
|
1-2 weeks delivery time The Vetus HCHD073 Heavy Duty Hose Clamp 73–79 mm (Article HCHD073) is designed for securing hoses with diameters from 73 to 79 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 28 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force.
|
$ 9.55
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD079 Heavy Duty Hose Clamp 79–85 mm (Article HCHD079) is designed for securing hoses with diameters from 79 to 85 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 28 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force.
|
$ 10.14
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD085 Heavy Duty Hose Clamp 85–91 mm (Article HCHD085) is designed for securing hoses with diameters from 85 to 91 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 20 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force.
|
$ 10.14
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD091 Heavy Duty Hose Clamp 91–97 mm (Article HCHD091) is designed for securing hoses with diameters from 91 to 97 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 20 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force.
|
$ 10.14
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD097 Heavy Duty Hose Clamp 97–104 mm (Article HCHD097) is designed for securing hoses with diameters from 97 to 104 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 20 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force.
|
$ 10.14
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD104 Heavy Duty Hose Clamp 104–112 mm (Article HCHD104) is designed for securing hoses with diameters from 104 to 112 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 12 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force in very large-diameter hose systems.
|
$ 11.33
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD112 Heavy Duty Hose Clamp 112–121 mm (Article HCHD112) is designed for securing hoses with diameters from 112 to 121 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 12 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force in very large-diameter hose systems.
|
$ 13.72
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD121 Heavy Duty Hose Clamp 121–130 mm (Article HCHD121) is designed for securing hoses with diameters from 121 to 130 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features a 25 mm wide band, supports a maximum tightening torque of 30 Nm, and is rated for operating pressures up to 12 bar. Classified as Heavy Duty, this clamp is intended for applications requiring significantly increased mechanical strength and high clamping force in very large-diameter hose systems.
|
$ 13.72
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD130 Heavy Duty Hose Clamp 130–140 mm (Article HCHD130) is designed for securing hoses with diameters from 130 to 140 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 9 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in large-diameter hose systems.
|
$ 18.49
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD140 Heavy Duty Hose Clamp 140–150 mm (Article HCHD140) is designed for securing hoses with diameters from 140 to 150 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 9 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in large-diameter hose systems.
|
$ 18.49
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD150 Heavy Duty Hose Clamp 150–162 mm (Article HCHD150) is designed for securing hoses with diameters from 150 to 162 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 9 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in large-diameter hose systems.
|
$ 18.49
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD162 Heavy Duty Hose Clamp 162–174 mm (Article HCHD162) is designed for securing hoses with diameters from 162 to 174 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 6 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in extra-large diameter hose systems.
|
$ 20.88
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD174 Heavy Duty Hose Clamp 174–187 mm (Article HCHD174) is designed for securing hoses with diameters from 174 to 187 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 6 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in extra-large diameter hose systems.
|
$ 20.88
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD187 Heavy Duty Hose Clamp 187–200 mm (Article HCHD187) is designed for securing hoses with diameters from 187 to 200 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 6 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in extra-large diameter hose systems.
|
$ 23.26
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD200 Heavy Duty Hose Clamp 200–213 mm (Article HCHD200) is designed for securing hoses with diameters from 200 to 213 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 3 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in extra-large diameter hose systems.
|
$ 23.26
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD213 Heavy Duty Hose Clamp 213–226 mm (Article HCHD213) is designed for securing hoses with diameters from 213 to 226 mm in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 28 mm band, supports a maximum tightening torque of 45 Nm, and is rated for operating pressures up to 3 bar. Classified as Heavy Duty, this clamp is intended for applications requiring maximum mechanical strength and very high clamping force in extra-large diameter hose systems.
|
$ 23.26
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD260 Heavy Duty Hose Clamp 263–276 mm (Article HCHD260) is designed for securing large-diameter hoses in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 30 mm band and is classified as Heavy Duty. The clamp is intended for very large hose systems with nominal hose diameters in the 265–278 mm range, providing maximum mechanical stability in demanding industrial and marine applications.
|
$ 85.90
-
+
| ||
|
1-2 weeks delivery time The Vetus HCHD300 Heavy Duty Hose Clamp 316–329 mm (Article HCHD300) is designed for securing very large-diameter hoses in high-load installations. Manufactured from galvanised steel (AISI 430), it features an extra-wide 30 mm band and is classified as Heavy Duty. The clamp is intended for hose systems with diameters in the 317–330 mm range, providing maximum mechanical stability in demanding industrial and marine applications.
|
$ 109.16
-
+
| ||
|
1-2 weeks delivery time The 2-way FF ball valve, designed for applications such as fuel, diesel, glycol water, and compressed air up to 6 bars, features a hot-stamped nickel-plated brass body (CW617N) and a chrome-plated brass sphere (CW614N) for durability. It operates within a temperature range of 0°C to +110°C and includes a PTFE sphere seal, injectable shaft, and reversible handle, adhering to Directive 2014/68/EU standards and is branded by Euromarine.
|
$ 9.36
-
+
| ||
|
1-2 weeks delivery time The 2-Way FF Ball Valve - PN40 - 3/8'' in a blister pack is a high-quality valve suitable for fuel, gas oil, glycol water, and compressed air transmission. It features a body made of hot forged nickel-plated brass and a chrome-plated spherical component, both providing durability. The valve includes PTFE seals, a non-injectable shaft, and a reversible handle, with an operating temperature range of 0°C to +110°C and a pressure rating of up to 6 Bars. It complies with Directive 2014/68/EU and is branded by Euromarine.
|
$ 9.39
-
+
| ||
What are the key differences between marine plumbing fittings and standard household plumbing fittings?
Marine plumbing fittings differ from standard household plumbing fittings in their materials and design, as they must withstand constant exposure to water, salt, and pressure variations. Fittings for boats, such as bronze pipe to hose adapters, 316 stainless steel connectors, and nylon hose fittings, are corrosion-resistant and designed for durability in harsh marine environments. Additionally, components like seacocks, hose clamps, and pipe plugs ensure secure and leak-free connections, preventing failures that could lead to water intrusion or system malfunctions.
Contuct us to shop best fittings for your boat.
How does a pipe to hose adapter help connect different plumbing components on a boat?
A pipe to hose adapter allows seamless connection between rigid plumbing components and flexible marine hoses, ensuring compatibility across different boat plumbing fittings. Commonly made from stainless steel, brass, nylon, or Marelon, these adapters provide a secure and watertight transition for water intake, drainage, and fuel lines. Available in various sizes and thread types, they help maintain reliable plumbing connections on decks, hulls, and tanks while resisting corrosion in harsh marine environments.
How does a 90 degree elbow fitting help in routing boat plumbing lines?
A 90 degree elbow fitting is essential in boat plumbing as it allows for efficient redirection of water flow in tight spaces, preventing kinks in hoses and reducing strain on connections. Made from durable materials like plastic or NPT brass, it ensures a secure and leak free transition between pipes and hoses. With options like barbed or swivel designs, these fittings simplify installation and maintenance, making them a vital accessory for any marine plumbing system.