Power hydraulic marine systems are essential for boats, providing hydraulic marine propulsion drives. These systems offer efficient power transmission for various marine applications, enhancing maneuverability and control. They are commonly used in boats and yachts, ensuring reliable and responsive propulsion in the challenging marine environment.
|
1-2 weeks delivery time The Vetus HT1028 Hydraulic Tank Complete Set for Power Steering is a fully integrated solution for steering systems. It includes all necessary components mounted on the top cover, simplifying installation and ensuring reliable operation of your hydraulic system.
|
$ 4,843.15
-
+
| ||
|
1-2 weeks delivery time The Vetus BPJ5B Thruster Control Panel (article: BPJ5B) is designed for hydraulic bow thruster systems, featuring a 5-position joystick that provides two-stage thrust control for precise maneuvering. The first detent position allows partial power for controlled hands-free operation, while the second stage delivers full thrust instantly when required. Made with UV-resistant materials and protected to IP65, this remote panel ensures reliable performance even in harsh marine environments.
|
$ 827.06
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1016SD3 is a 100 cm³ variable load-sensing hydraulic piston pump with left-hand (anti-clockwise) rotation, designed for installation on a main or auxiliary marine engine. It features a robust cast-iron, low-noise housing, an SAE-C 4-bolt flange with a 17-tooth spline shaft, and side suction/pressure connections. Maximum operating speed: 2450 rpm.
|
$ 8,024.43
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1016SD4 is a 130 cm³ variable load-sensing hydraulic piston pump for marine applications. It features a cast-iron low-noise housing, left-hand (anti-clockwise) rotation, SAE-C 4-bolt flange with a 17-tooth spline shaft, and side suction/pressure connections. Designed for mounting on a main or auxiliary engine, with a maximum operating speed of 2200 rpm.
|
$ 9,295.85
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1027 piston pump (article HT1027) is a 45 cc variable load-sensing hydraulic pump designed for mounting on John Deere engine PTO systems. It features a clockwise rotation (right-hand), an aluminum housing with SAE-B flange interface, a 13-tooth splined drive shaft, side-positioned suction and pressure ports, and supports speeds up to 2800 RPM.
|
$ 4,606.65
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1028B hydraulic tank system (article HT1028B) is a compact 20-liter aluminum hydraulic reservoir designed for bow thrusters on vessels without an existing hydraulic installation. The unit is configured for fixed-displacement pumps (HT1029) and 24V valves, supplied complete with required steering and control components. Suitable for VETUS bow thruster models BOW55HMD and BOW95HMD, it features durable construction and a space-efficient layout with dimensions of 470 × 415 × 310 mm.
|
$ 4,250.81
-
+
| ||
|
1-2 weeks delivery time The Vetus HPTANK hydraulic tank (article HPTANK) is a 35 liter AISI 316 stainless steel reservoir designed for marine and industrial hydraulic systems. With compact overall dimensions of approximately 530 × 210 × 565 mm, it provides corrosion-resistant hydraulic oil storage and is supplied with an integrated filter and temperature sensor for reliable operation and system monitoring. The tank is suitable for use in 12 V and 24 V installations and can be connected to one or more compatible hydraulic pumps and circuits.
|
$ 2,421.53
-
+
| ||
|
1-2 weeks delivery time The Vetus HT5034 Electrical Connection Box is a marine-grade junction unit (part number HT5034) designed for 12 V or 24 V hydraulic system installations; it centralises wiring for solenoid valves, control panels and power supply, ensuring clean, reliable and compact electrical integration for thrusters, windlasses and other hydraulic accessories on board.
|
$ 746.72
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1032 Proportional Valve SD is a 24 V proportional hydraulic valve designed for devices such as bow thrusters and anchor winches with hydraulic capacity between 40 and 130 litres. The valve adapts to the capacity of the connected device and is available in both 24 V and 12 V versions, providing smooth proportional control for marine hydraulic applications.
|
$ 3,260.18
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1035 Double Proportional Valve SD PGV is a 24 V dual proportional hydraulic control solution for consuming devices such as bow thrusters, stern thrusters and anchor winches. It supports a combined hydraulic capacity between 40 and 130 litres and can control two proportional loads in a single system. A 12 V option is available by special order.
|
$ 5,881.84
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3057 is a dedicated connection kit (part number HT3057) for hydraulic bow (or stern) thrusters with thrust capacity 55 or 95 kgf; it provides all required hydraulic connections and fittings to ensure secure, reliable integration of the thruster, pump and hydraulic system, simplifying installation or retrofit on small to mid-size vessels.
|
$ 156.25
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3056 Connection Kit is a dedicated installation set for hydraulic bow (or stern) thrusters rated up to 160 kgf (160 kgf thrust capacity), designed to interconnect thruster, hydraulic pump and control components reliably. The kit ensures secure mounting and hydraulic integration, simplifying installation for vessels using or upgrading hydraulic propulsion systems.
|
$ 162.99
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3061 Connection Kit (part number HT3061) is a hydraulics installation set designed for hydraulic bow (or stern) thrusters rated at 230 kgf. The kit delivers all necessary hydraulic connection components to safely and reliably integrate a 230 kgf-class thruster with the vessel’s hydraulic system, simplifying installation or retrofit, ensuring correct pressure handling and compliance with marine standards.
|
$ 262.66
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3058 Connection Kit (part number HT3058) is engineered for hydraulic bow or stern thrusters with thrust capacity up to 310 kgf. The kit includes all essential hydraulic fittings and connectors to enable secure, marine-rated installation of the thruster with hydraulic power unit, ensuring proper pressure handling and reliable operation on medium to large vessels.
|
$ 245.15
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN04B is a stainless steel (AISI 316) fin stabilizer set (2-piece, total fin area 0.4 m²) designed for hydraulic stabilizer systems. It is intended for installation on yachts and motorboats to significantly reduce roll/pitch motions, offering “plug-and-play” installation for steel, GPR or aluminum hulls — ideal for retrofit or new builds needing reliable roll stabilization.
|
$ 19,711.37
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN05B is a set of two stainless-steel AISI 316 fin stabilizers with a total fin area of 0.5 m², designed for installation below the waterline on both sides of yachts over 10 m. Using a hydraulic system and fully automatic control, the fins continuously adjust their angle to significantly reduce roll and pitch motion in heavy swell or rough weather. Each fin measures 1024 mm in length and 554 mm in height and is suitable for steel, GRP or aluminum hulls.
|
$ 21,048.26
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN06B is a set of two stainless-steel AISI 316 fin stabilizers with a total fin area of 0.6 m², designed for installation beneath the waterline on yachts and motorboats. Each fin measures 1125 mm in length and 600 mm in height and operates via a 24 V hydraulic system with automatic computer control, significantly reducing roll and pitch on steel, GRP or aluminum vessels, including retrofit applications.
|
$ 22,135.30
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN07B is a marine stabilizer fin set consisting of two AISI 316 stainless-steel fins with a total area of 0.7 m². Designed for installation below the waterline on both sides of the hull, each fin operates through a 24 V hydraulic system with computer-controlled angle adjustment, significantly reducing roll and pitch on steel, GRP, or aluminum vessels. The fins measure 1318 mm in length, making them suitable for yachts requiring enhanced stability in rough sea conditions.
|
$ 22,636.37
-
+
| ||
|
1-2 weeks delivery time The Vetus STA24VA is a complete electric stabilizer system set designed for marine hydraulic roll-stabilization. It includes two cast-steel fin actuator housings with cylinders, yokes, a roll sensor, hydraulic pressure block, control panel, connection box, couplings, grease pump and consumables, as well as full installation documentation. The system runs on a 24-volt supply and is suitable for integration into onboard hydraulic systems to significantly reduce roll on yachts and motor vessels.
|
$ 23,052.61
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1028S is a compact 20-liter hydraulic storage tank system designed for vessels without an existing hydraulic network, supplying stabilizers with the required hydraulic power, steering and control integration. It is configured for pumps with a fixed stroke volume (HT1029) and 24 V valves, with optional versions available for load-sensing pumps and 12 V valves.
|
$ 4,426.93
-
+
| ||
How does a marine hydraulic system contribute to vessel steering efficiency?
A marine hydraulic system enhances vessel steering efficiency by converting hydraulic energy into mechanical energy through hydraulic motors and pumps. The system's hydraulic steering components, including the hydraulic motor and power take-off (PTO), provide smooth and responsive control of the steering gear, enabling precise maneuvering. Hydraulic power units and vane pumps ensure consistent pressure and flow, allowing for reliable operation of marine equipment like cranes, winches, and water pumps, all of which contribute to the overall performance and safety of the vessel.
What types of pumps are commonly used in marine hydraulics, and how do they differ in performance?
In marine hydraulics, several types of pumps are commonly used, including vane pumps, gear pumps, and piston pumps. Vane pumps are typically preferred for their smooth operation and efficiency in low-pressure systems, while gear pumps are known for their simplicity and durability in high-flow applications. Piston pumps, on the other hand, are ideal for high-pressure systems, offering greater power density and performance in demanding environments, making them crucial for hydraulic steering systems and main propulsion units. Each pump type differs in terms of flow capacity, pressure handling, and efficiency, making it important to select the right pump based on the specific marine application and power requirements.
In what types of marine applications are hydraulic pumps commonly used, and how do they enhance system efficiency?
Hydraulic pumps are commonly used in a variety of marine applications, including davits, winches, steering systems, and lifting machinery. They enhance system efficiency by providing reliable, high-pressure hydraulic power that drives motors and other components, ensuring smooth and consistent operation. By converting mechanical energy from power sources like generators or power take-offs (PTO), these pumps improve overall system performance, safety, and reliability in demanding marine environments.