Marine fuel pumps and boat motor fuel filters are crucial components of a watercraft's fuel system. The marine fuel pump is responsible for delivering fuel from the tank to the engine, while the boat fuel filter helps remove impurities and contaminants from the fuel, ensuring a clean supply to the engine.
|
1-2 weeks delivery time Price incl. 19% VAT The Osculati 52.746.10 Mounting Flange is a practical solution designed to simplify the installation of S3 thread sensors on tanks that are already equipped with a 5-bore flange (S5). This stainless steel mounting flange ensures seamless compatibility, making it easy to integrate level sensors onto tanks for efficient monitoring. Upgrade your tank monitoring system effortlessly with this reliable and durable mounting solution from Osculati, providing convenience and effectiveness for S5 to S3 sensor installations.
|
€ 4,77
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 12V Electric Drain Pump by Euromarine is a powerful and efficient tool designed for draining water, featuring a flow rate of 3 liters per minute, a 12V/5A power supply, and a convenient spiral cord with battery clamps. It comes with two pipes of diameters 6 mm and 14 mm for versatile usage.
|
€ 46,20
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Manual Oil Drainer, with a capacity of 6 liters and a tank diameter of 23 cm, is designed for efficient oil extraction. It features a pump measuring 4.8 cm in diameter and 29 cm in height, along with a 2.10 m drain tube. Included accessories are a tank, pump with handle, cap with drain hose, pouring spout, and user manual. Please note that it should not be used with flammable liquids. Brand: Euromarine.
|
€ 97,09
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Collar 12/40-60, identified by product number ICE1260, is a durable fastening solution designed for hoses with diameters ranging from 12 to 40 mm. It features robust construction for reliable performance, easy installation for a secure grip, and resistance to rust and corrosion.
|
€ 1,55
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 10L red hydrocarbon jerrycan is engineered for stability and safety, made from high-density non-recycled polyethylene for optimal impact protection. It features a flat bottom for stability, an integrated flexible spout with an anti-backflow feature, and meets European "UN" standards, ensuring reliable performance in all situations.
|
€ 9,73
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 20L Red Hydrocarbon Jerrycan is engineered for maximum stability and safety, offering reliable storage for hydrocarbons. It features a flat bottom design for excellent stability, is made of high-density non-recycled polyethylene reinforced against impact, includes a built-in flexible spout with an anti-gurgle feature, and complies with European "UN" standards.
|
€ 14,18
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 5L red hydrocarbon jerrycan is engineered for stability and safety, featuring a flat bottom for enhanced stability, durable non-regenerated high-density polyethylene construction, and a flexible anti-backflow spout for easy pouring. It is also compliant with European "UN" standards, making it a reliable choice for various uses.
|
€ 7,72
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Chrome-plated Brass Tank Vent by Euromarine is a durable and corrosion-resistant solution designed for optimal ventilation with a diameter of 15 mm, ensuring easy installation and maintenance.
|
€ 18,09
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Chrome-plated Brass Tank Vent with Adapter is designed for efficient ventilation in tank systems. It features an external diameter of 28 x 27 mm, a thread diameter of 15 mm, and a tube diameter of 15 mm, with a total length of 60 mm. Made from chrome brass, this model includes a hose adapter and comes packaged in a blister of one, under the brand Euromarine.
|
€ 13,12
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The stainless steel clamp is designed for 22mm bimini tubes, providing durability and reliability for marine applications. It securely holds your bimini top in place, ensuring a stable outdoor experience. Key dimensions include a diameter of 22mm, Dimension A is 53.5mm, Dimension B is 27.5mm, Dimension C is 8mm, and Dimension D is 22mm. This product comes in a pack of one and is from the brand Euromarine.
|
€ 11,14
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W4, made from high-quality 18/8 stainless steel (AISI 304), is designed for use in demanding corrosive and marine environments. It includes a clamp, casing, and screws, making it suitable for humid and hydrocarbon conditions. Available in ACE boxes or individually packaged in Euromarine blisters, the clamp has specific tightening requirements of 4 Nm for a 9 mm width and 5.5 Nm for a 12 mm width.
|
€ 1,38
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The W4 double-wire clamp is a durable fastening solution sized at 43-48mm, made from high-quality stainless steel AISI 304 (18/10). It includes a clamp, screw, and nut, ensuring a secure hold and excellent performance for various applications. This reliable product is brought to you by the brand ACE.
|
€ 1,35
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The W4 50-55mm Double-wire Clamp is a durable fastening solution made from stainless steel AISI 304, designed to securely hold pipes and tubing in various applications. Its corrosion-resistant design ensures longevity, while the easy installation process with screw and nut makes it a practical choice for reliable piping support.
|
€ 1,61
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The W4 double-wire clamp, made from durable AISI 304 stainless steel, is a reliable component for securing hoses and pipes with a size range of 45-50mm. Its adjustable design ensures a tight seal to prevent leakage, while its corrosion-resistant properties make it suitable for outdoor use. Easy to install and featuring a strong double-wire design, this clamp is an essential choice for various applications.
|
€ 1,53
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W5, made of Stainless Steel 316, offers a reliable solution for securing flexible tubes with minimal surface damage. It features a full band type, adjustable clamp diameter of 9 to 12 mm, progressive tightening for customizable pressure, and a reusable design. Available in boxes or blister packs from Euromarine, this product is branded by ACE.
|
€ 1,30
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W5 is a versatile and efficient solution for securing soft tubes, designed to minimize damage to surfaces. Made of durable stainless steel 316, it accommodates diameters from 9mm to 12mm and features a progressive tightening mechanism for adjustable pressure. Its reusable design ensures long-term use, and it is available in boxes or Euromarine blister packs, under the ACE brand.
|
€ 1,37
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W5, made of stainless steel 316, is designed for flexibility and reliability in securing various tube types with a diameter of 9 to 12 mm. It features progressive tightening for adaptability, a reusable design for long-lasting use, and comes in boxes or Euromarine blister packaging from the brand ACE, minimizing damage to soft supports compared to perforated clamps.
|
€ 1,50
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W5 is an adjustable clamping solution for flexible hoses, made from high-quality 316 stainless steel for durability and rust resistance. It features a clamp diameter range of 9 to 12 mm, full bands that minimize support damage, progressive tightening for customizable pressure, and a reusable design for long-term use. Available in boxes or Euromarine blisters, it is a product from the brand ACE.
|
€ 1,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W5 is a durable and reliable stainless steel clamp made from high-quality Stainless Steel 316, designed for various applications with compatible diameters ranging from 9 to 12 mm. It minimizes damage to soft tubing compared to perforated clamps, features progressive and adjustable tightening, and offers a reusable design for multiple uses. Available in ACE boxes or Euromarine blister packs, this clamp is ideal for those seeking a robust solution.
|
€ 2,07
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Full Band Clamp W5, made from stainless steel 316, is designed for effective and secure fastening in flexible tubing applications. It features a full band design with a diameter tightening range of 9 to 12 mm, offers gentle support compared to perforated clamps, and allows for progressive tightening that can be adjusted according to the desired effect. This reusable clamp is available from Euromarine in boxes or blister packs.
|
€ 2,16
-
+
| ||
What is the function of a solenoid in a marine fuel system, and how does it control fuel flow?
A solenoid in a marine fuel system acts as an electrically controlled valve that regulates fuel flow to the engine. It works by opening or closing to allow fuel to pass through the system, ensuring the proper fuel supply to the carburetor or injector. By controlling fuel flow, the solenoid helps maintain the correct fuel pressure and prevents fuel leaks, ensuring the engine operates efficiently and safely. To maximize fuel system reliability and prevent contamination issues, solenoids are often paired with a quality Boat Fuel Filter, ensuring that only clean fuel reaches the engine.
To ensure compatibility and long-term reliability, explore our full selection of Replacement Fuel Tanks for Boats designed for seamless integration with marine fuel systems.
How does the use of aluminum components in a fuel tank affect the overall durability and performance of the system?
The use of aluminum components in a fuel tank enhances the overall durability and performance of the marine fuel system by providing a lightweight yet strong material that resists corrosion, especially in harsh marine environments. Aluminum is less prone to leaks and damage from mechanical stress compared to other materials, and it also ensures proper fuel flow through connectors and fittings. However, caution must be taken when using aluminum, as it can be susceptible to damage from certain chemicals or contaminants in the fuel, requiring regular inspection and maintenance to ensure reliable operation of the fuel system.
To support fuel delivery and maintain system efficiency, pair your tank setup with a reliable Boat Fuel Pump designed for marine-grade performance.
How does a primer work in a fuel system, and when should it be used on an outboard engine?
A primer in a fuel system works by manually forcing fuel into the carburetor or fuel pump, ensuring that the engine is properly primed for starting. It is typically used when the fuel level is low, or after the engine has been sitting idle for a while, as it helps to remove air from the fuel lines and replace it with fuel. On an outboard engine, the primer should be used to ensure that the fuel system is connected and free from particles or air pockets, particularly before starting the engine after maintenance or repairs.
Reliable components like quality Marine Fuel Tanks are essential for maintaining consistent fuel delivery and ensuring smooth engine operation.