Marine fuel pumps and boat motor fuel filters are crucial components of a watercraft's fuel system. The marine fuel pump is responsible for delivering fuel from the tank to the engine, while the boat fuel filter helps remove impurities and contaminants from the fuel, ensuring a clean supply to the engine.
|
1-2 weeks delivery time The Chrome-plated Brass Tank Vent with Adapter is designed for efficient ventilation in tank systems. It features an external diameter of 28 x 27 mm, a thread diameter of 15 mm, and a tube diameter of 15 mm, with a total length of 60 mm. Made from chrome brass, this model includes a hose adapter and comes packaged in a blister of one, under the brand Euromarine.
|
$ 17.34
-
+
| ||
|
1-2 weeks delivery time The Vetus FFS0800 Connection Set (article: FFS0800) is a straight 8 mm hose-connector kit designed for single Vetus fuel filters. Intended as an alternative to the standard 10 mm fittings supplied with spin-on fuel filters, this set enables installation where smaller-diameter fuel hoses are required.
|
$ 27.62
-
+
| ||
|
1-2 weeks delivery time The Vetus FFS0890 Connection Set (article: FFS0890) provides 8 mm 90° angled hose connectors for single Vetus fuel filters. Designed as an alternative to the standard 10 mm straight connectors supplied with spin-on filters, this kit is ideal for installations requiring compact routing or angled fuel-line entry.
|
$ 35.03
-
+
| ||
|
1-2 weeks delivery time The Vetus FFS1000 Connection Set (article: FFS1000) provides straight 10 mm hose connectors designed for single Vetus spin-on fuel filters. Intended as a direct-fit solution for installations requiring standard 10 mm fuel lines, this set ensures secure and reliable integration of the fuel hose with the filter assembly.
|
$ 27.62
-
+
| ||
|
1-2 weeks delivery time The Vetus FFS1090 Connection Set (article: FFS1090) provides 90° angled 10 mm hose connectors for single Vetus spin-on fuel filters. Designed as an alternative to the standard straight 10 mm connectors supplied with the filters, this kit enables easier installation where angled routing of fuel lines is required.
|
$ 36.37
-
+
| ||
|
1-2 weeks delivery time The Vetus FFS1300 Connection Set (article: FFS1300) provides straight hose connectors designed for 13 mm fuel lines used with single Vetus spin-on fuel filters. This set is intended for installations requiring larger-diameter fuel hoses and offers a secure, direct-fit solution for proper fuel-line integration.
|
$ 66
-
+
| ||
|
1-2 weeks delivery time The Vetus FFS1390 Connection Set (article: FFS1390) provides 90° angled hose connectors for 13 mm fuel lines used with single Vetus spin-on fuel filters. Designed as an alternative to the standard 10 mm straight fittings supplied with the filters, this kit ensures proper angled routing where installation space or hose direction requires a compact bend.
|
$ 92.95
-
+
| ||
|
1-2 weeks delivery time The Vetus FFD0800 Connection Set (article: FFD0800) provides straight 8 mm hose connectors for double Vetus spin-on fuel filter systems. Designed for installations requiring Ø 8 mm ISO 7840 fuel pipe, this kit fits double-filter units with G1/2 (½" BSP) male connections and is suitable for models 75330VTEB, 75340VTEB, and 75350VTEB.
|
$ 42.43
-
+
| ||
|
1-2 weeks delivery time The Vetus FFD0890 Connection Set (article: FFD0890) provides 90° angled hose connectors for 8 mm fuel lines used with double Vetus spin-on fuel filter systems. Designed as an alternative to the standard straight 10 mm connectors, this kit is intended for installations requiring compact or directional hose routing where space constraints must be addressed.
|
$ 43.11
-
+
| ||
|
1-2 weeks delivery time The Vetus FFD1000 Connection Set (article: FFD1000) provides straight 10 mm hose connectors for double Vetus spin-on fuel filter systems. Intended as the standard connection option for these filters, this kit ensures secure attachment of 10 mm fuel hoses and supports reliable integration with double filter assemblies.
|
$ 46.47
-
+
| ||
|
1-2 weeks delivery time The Vetus FFD1090 Connection Set (article: FFD1090) provides 90° angled 10 mm hose connectors for double Vetus spin-on fuel filter systems. Designed as an alternative to standard straight fittings, this kit is ideal for installations requiring directional routing of 10 mm fuel hoses in confined or complex engine-room layouts.
|
$ 51.19
-
+
| ||
|
1-2 weeks delivery time The Vetus FTANK25 (article FTANK25) is a 25-liter synthetic diesel fuel tank made from seamless, high-grade linear polyethylene. Its leak-free, corrosion-free construction offers improved safety over metal tanks and reduces condensation. The tank includes an installation kit and comes with hose connectors for filling (Ø51 mm), fuel supply (Ø8 mm), fuel return (Ø8 mm) and a breather line (Ø16 mm). Dimensions: 490 mm length, 220 mm width, 300 mm height.
|
$ 264.02
-
+
| ||
|
1-2 weeks delivery time The Vetus APT100 (article APT100) is a 100-liter all-purpose tank made from high-grade polyethylene and suitable for diesel, fresh water, grey water, or black water. It features an 8 mm wall thickness, a large ISO 21487–compliant inspection port, and a 38 mm bottom connection that can be drilled out for tank interconnection or draining. Dimensions: 1010 mm length, 390 mm width, 315 mm height.
|
$ 422.96
-
+
| ||
|
1-2 weeks delivery time The Vetus VTSTRAP (article VTSTRAP) is a set of two durable lashing straps, each measuring 3 meters in length and 25 mm in width. Designed for securing equipment on board, these straps feature robust webbing material and display the Vetus logo for easy identification.
|
$ 18.18
-
+
| ||
|
1-2 weeks delivery time The Vetus FTLDB Connection Kit (article FTLDB) is designed for the installation of twin fuel tanks and enables secure interconnection between two Vetus tanks. It includes a lid with dual 16 mm ventilation connections, G3/4 brass skin fittings with a coupling for tank linking, and two mounting strips for securing the tanks. The kit supports rapid installation using the expanding clamp method.
|
$ 305.77
-
+
| ||
|
1-2 weeks delivery time The Vetus ILT120B Inspection Lid (article ILT120B) is a reinforced, glass-fibre-enhanced access port designed for diesel tanks containing up to 10% biodiesel. It offers a 120 mm internal aperture and requires a 159 mm cut-out, fitting GRP, metal, and plastic tanks of varying wall thicknesses. The redesigned model meets ISO 10088 and ISO 21487 standards and includes a counter flange and rubber seal compressed by four bolts for a secure, leak-free installation.
|
$ 120.55
-
+
| ||
|
1-2 weeks delivery time The Vetus ILT120X Inspection Lid (article ILT120X) is a reinforced 120 mm access port equipped with Viton seals for petrol tanks or diesel systems containing more than 10% biodiesel. It fits a 159 mm cut-out and suits GRP, metal, and plastic tanks of varying wall thicknesses. The lid uses a clamp-and-seal mechanism with four bolts for secure closure and meets both ISO 10088 and ISO 21487 standards.
|
$ 165.68
-
+
| ||
|
1-2 weeks delivery time The Vetus WRILT Wrench (article WRILT) is a durable, glass-reinforced polyamide tool with a stainless-steel bolt and nut designed to simplify the opening and closing of ILT120-series inspection lids. It provides an even distribution of force and a secure grip to loosen stubborn lids effortlessly. The wrench is compatible with ILT120B, ILT120X, ILT120F, ILT120DF, and ILT120DL, even when fitted with connection kits such as ILTCONW, ILTCOND, or ILTCONF38.
|
$ 14.82
-
+
| ||
|
1-2 weeks delivery time The Vetus ILTCONF38 Fuel Connection Kit (article ILTCONF38) is designed for use with ILT120-series inspection lids and provides all required fuel-related connections, including a 38 mm filler port, 8/10 mm fuel suction and return lines, a 16 mm vent connection, and a five-hole SAE flange for tank level sensors. The kit includes an 8 mm suction port for marine diesel heaters and an 80 cm suction/return tube that can be shortened as needed. It fits a 159 mm cut-out and features a 120 mm disc diameter.
|
$ 88.90
-
+
| ||
|
1-2 weeks delivery time The Vetus ILTCON90 Filler Elbow (article ILTCON90) is a 90-degree Ø38 mm hose connector with a 1¼" thread designed for use with ILTCOND, ILTCONW, and ILTCONF38 fuel and waste tank connection kits. It serves either as a replacement for the original straight filler connector or as an additional fitting, providing a compact angled installation option for tanks requiring a 38 mm filler connection.
|
$ 26.11
-
+
| ||
What is the function of a solenoid in a marine fuel system, and how does it control fuel flow?
A solenoid in a marine fuel system acts as an electrically controlled valve that regulates fuel flow to the engine. It works by opening or closing to allow fuel to pass through the system, ensuring the proper fuel supply to the carburetor or injector. By controlling fuel flow, the solenoid helps maintain the correct fuel pressure and prevents fuel leaks, ensuring the engine operates efficiently and safely. To maximize fuel system reliability and prevent contamination issues, solenoids are often paired with a quality Boat Fuel Filter, ensuring that only clean fuel reaches the engine.
To ensure compatibility and long-term reliability, explore our full selection of Replacement Fuel Tanks for Boats designed for seamless integration with marine fuel systems.
How does the use of aluminum components in a fuel tank affect the overall durability and performance of the system?
The use of aluminum components in a fuel tank enhances the overall durability and performance of the marine fuel system by providing a lightweight yet strong material that resists corrosion, especially in harsh marine environments. Aluminum is less prone to leaks and damage from mechanical stress compared to other materials, and it also ensures proper fuel flow through connectors and fittings. However, caution must be taken when using aluminum, as it can be susceptible to damage from certain chemicals or contaminants in the fuel, requiring regular inspection and maintenance to ensure reliable operation of the fuel system.
For a complete range of marine fuel storage solutions, explore our Boat Gas Tank options.
To support fuel delivery and maintain system efficiency, pair your tank setup with a reliable Boat Fuel Pump designed for marine-grade performance.
How does a primer work in a fuel system, and when should it be used on an outboard engine?
A primer in a fuel system works by manually forcing fuel into the carburetor or fuel pump, ensuring that the engine is properly primed for starting. It is typically used when the fuel level is low, or after the engine has been sitting idle for a while, as it helps to remove air from the fuel lines and replace it with fuel. On an outboard engine, the primer should be used to ensure that the fuel system is connected and free from particles or air pockets, particularly before starting the engine after maintenance or repairs.
Reliable components like quality Marine Fuel Tanks are essential for maintaining consistent fuel delivery and ensuring smooth engine operation.
For reliable fuel delivery, equip your setup with quality components from our Marine Fuel Line range.
For secure storage of your fuel supply, explore our range of Boat Fuel Tank solutions.