Victron Energy Control Panels and System Monitoring

Digital Multi Control Panel
The Digital Multi Control Panel is designed for Multiplus, Multiplus Compact and Quattro inverters. The panel allows you to change the limits of the current "PowerControl" and "PowerAssist" settings for two AC sources: generator and industrial network. The tuning range is up to 200 Amperes. If the redundant power supply system, which includes an electric generator, is built on a Multiplus inverter and it is necessary to set different limits of input current from the generator and the network, then the Digital Multi Control Panel is a necessary option.

Phoenix Inverter Control
The panel is designed to control and remotely turn on Phoenix inverters equipped with a VE.Bus port. The panel can also be used with a Multiplus inverter, but without using the "Charger Only" mode. The brightness of the LEDs automatically decreases at night. Phoenix Inverter Compact 1200-2000VA, Phoenix Inverter 3000-5000VA only.

Skylla-i Control GX
The Skylla-i Control GX is designed to work with all models of Skylla-i chargers. The Skylla-i panel and chargers have a VE.CAN information bus. The control panel allows you to change the charge current and monitor the state of the system.

Skylla Control
The Skylla Control panel allows you to change the charging current and monitor the state of the system. Changing the charging current is useful if the power of the mains is limited: AC input current, charger, can be controlled by limiting the maximum output charging current, thereby preventing the actuation of the input mains circuit breaker.

Phoenix Charger Control
The Phoenix Charger Control panel provides remote control of the charging process with LED indication of the state of the charger. In addition, the charging current can be adjusted from the panel. This can be used to limit the power consumed from the AC source. This is particularly useful when the charger is operating from a power-limited onshore connection or a small power plant. The panel can also be used to change battery charging parameters. The panel is connected to the charger using a standard RJ45 UTP5 cable.

Battery Alarm
Battery status alarm panel (too high or low voltage). The panel has LED and audible alarms and relays for remote alarms.

The company Yacht Goods will help you to find an electrical system for your yacht or boat. Please contact our managers on or through the Feedback Form .