Marine electrical products encompass a wide range of essential components for boats and marine vessels. These products include marine generators, batteries, battery switches, chargers, and solar panels designed for marine applications. They ensure reliable power sources, electrical control, and efficient energy management onboard, making them vital for boating safety and convenience. Additionally, fuses, switch control panels, and battery combiners are key elements in marine electrical systems, contributing to seamless operation and power distribution on boats.
|
1-2 weeks delivery time The Red LED Pushbutton and Buzzer - 24V features a pushbutton with red LED illumination and a built-in buzzer, designed for effective signaling in various applications. It has a stainless steel button, silver contacts, and operates at a maximum current of 5A. With an IP67 rating for the switch and IP50 for the buzzer, it emits an 80 dB alarm while the button flashes red simultaneously. Measuring 22 mm in diameter, it has a width of 2.7 inches and a length of 54 mm, making it a reliable choice for signaling needs.
|
$ 58,94
-
+
| ||
|
1-2 weeks delivery time The Smart Battery Hub (SBH) from BEP is the world's first intelligent battery management system designed for boats with two or more outboard motors. It features NMEA2000/IPX7 compatibility, remote-activated switches, and bidirectional voltage-sensitive switching (VSS), along with emergency parallel functionality and ignition protection against gas ignition. With robust IPX7 housing for easy installation, it supports configurations for two or three motors and includes manual safety controls, battery voltage monitoring, and state of charge monitoring. Rated at 300A with a maximum capacity of 1450A, it operates at 12/24V and weighs 8.4 kg, making it an essential component for efficient battery management in marine applications.
|
$ 2.722,53
-
+
| ||
|
1-2 weeks delivery time The Smart Battery Hub (SBH) from BEP is an advanced battery management system designed for boats with three or more motors. It features NMEA2000/IPX7 compatibility, remote-activated switches, and bidirectional voltage-sensitive switching (VSS). With emergency parallel functionality and ignition protection against gas ignition, the robust IPX7 housing allows for easy installation. It monitors battery voltage and state of charge, supports two or three motor configurations, and includes manual safety controls. Rated at 300A with a maximum capacity of 1450A, the hub operates at 12/24V and weighs 8.4 kg, making it an essential component for efficient battery management on marine vessels.
|
$ 3.188,46
-
+
| ||
|
1-2 weeks delivery time The DC Master Converter 24/12V - 24A offers a conversion efficiency of up to 90%, ensuring reliable performance with minimal heat generation. It features protection against reverse polarity and boasts a robust, lightweight, and compact design, along with LED indicators for easy monitoring. The converter includes a quick shutdown function to protect both the device and connected equipment, and comes with a bracket and terminals. With an output voltage of 13.2V, it measures 160 x 75 x 32 mm and weighs 326 g, making it a practical choice from the brand Mastervolt.
|
$ 361,78
-
+
| ||
|
1-2 weeks delivery time The Busbar Terminal Block with 12 Circuits and a 100A rating is designed for durability, featuring high-temperature plastic supports. It includes terminals and blocks, measures 177 x 15 x 29 mm, and is finished in black, making it a reliable option from the brand BEP.
|
$ 32,35
-
+
| ||
|
1-2 weeks delivery time The Busbar Terminal Block with 6 Circuits and a 100A rating is designed for reliable electrical connections, featuring high-temperature plastic supports for durability. It includes terminals and blocks, measuring 117 x 15 x 29 mm, and is finished in black. Suitable for various applications, this terminal block is a dependable choice from the brand BEP.
|
$ 28,19
-
+
| ||
|
1-2 weeks delivery time The Black Cover for a 12-Circuit Busbar offers protection and safety for electrical connections. Weighing 0.7 kg and finished in black, this cover is a reliable choice from the brand BEP.
|
$ 8,33
-
+
| ||
|
1-2 weeks delivery time The Bus Bar Replacement Cover for 12 Way Positive is an insulated cover designed for a secure push fit, effectively protecting exposed studs and terminal lugs while conforming to ABYC standards. This reliable cover is from the brand BEP.
|
$ 8,41
-
+
| ||
|
1-2 weeks delivery time The Black Cover for a 6-Circuit Busbar provides protection and safety for electrical components. Designed for six circuits with a negative polarity, this cover weighs 0.7 kg and is a dependable choice from the brand BEP.
|
$ 6,67
-
+
| ||
|
1-2 weeks delivery time The Bus Bar Replacement Cover for 6 Way Positive is an insulated cover designed for a secure push fit, providing reliable protection for exposed studs and terminal lugs. It conforms to ABYC standards, ensuring safety and functionality. This cover is a dependable choice from the brand BEP.
|
$ 6,74
-
+
| ||
|
1-2 weeks delivery time The Insulated Red Terminal Ø10mm is designed to isolate high-power connection points, including alternators, bow thrusters, starters, and simple terminals. This terminal features a threaded rod diameter of Ø10 mm and is a reliable choice from the brand BEP.
|
$ 13
-
+
| ||
|
1-2 weeks delivery time The Black Insulated Terminal Ø10mm is designed to isolate high-power connection points, including alternators, bow thrusters, starters, and simple terminals. It features a threaded rod diameter of Ø10 mm and is a reliable choice from the brand BEP.
|
$ 13
-
+
| ||
|
1-2 weeks delivery time The Black Insulated Terminal Ø10mm with Cover (Bulk) is designed for high-power connections and includes a protective cover for added safety. Featuring a threaded rod diameter of Ø10 mm, it is a dependable choice from the brand BEP.
|
$ 15,99
-
+
| ||
|
1-2 weeks delivery time The Single Insulated Terminal - 8 mm is designed to save space and provide design flexibility, featuring molded cable lugs and a reinforced fiber base for strength and durability. It converts a single stud into up to four connection points for small cables while maintaining access for larger cables. With innovative transparent covers that insulate and protect on three sides, this terminal ensures easy access to connections and is a reliable choice from the brand BEP.
|
$ 27,67
-
+
| ||
|
1-2 weeks delivery time The Mini OLED Ammeter (12/24V - 100A) is designed for monitoring critical elements of the electrical system on a highly visible waterproof OLED screen. Its compact size fits in a 29 mm cutout and offers protection against reverse polarity. It can monitor current ranging from -100A to +100A, with a maximum cranking current of 175A for 30 seconds. This product is branded by Blue Sea.
|
$ 153,12
-
+
| ||
|
1-2 weeks delivery time The Terminal Block 20A - 4 Circuit features a closed back design that ensures complete insulation of power from the mounting surface, enhancing safety and versatility. Each screw pair represents one isolated circuit, and jumpers allow for the creation of common circuits. It accommodates four circuits with a maximum voltage of 300V AC/DC and a continuous rating of 20A. Made from UL 94 V0 PC base material and nickel-plated brass for the bus, it has a length of 2.17 inches (55.12 mm) and weighs 0.06 lb (0.03 kg). The mounting screw is #6 [M3.5], with terminal screws of size M3.5, and it is branded by Blue Sea.
|
$ 8,83
-
+
| ||
|
1-2 weeks delivery time The WeatherDeck Toggle Switch Boot in black is designed to replace the dress nut for mounting on WeatherDeck™ panel switches, offering enhanced protection and durability. It is IP67 rated for temporary immersion for up to 30 minutes and is made from UV-resistant material to prevent discoloration and cracking. This product is branded by Blue Sea.
|
$ 3,10
-
+
| ||
|
1-2 weeks delivery time The ST Blade Compact Fuse Blocks - 4 Circuits provides effective circuit protection and is ignition protected for use in gasoline engine compartments. It offers surface mount protection for ATO®/ATC® fuses and meets ISO 8846 and SAE J1171 standards when the cover is secure. Designed with a single side layout to minimize footprint, it features wire entry from one side and an insulating cover that meets ABYC/USCG insulation requirements. Constructed with tin-plated copper buses and fuse clips for durability, it accepts ring or snap fork type terminals and includes four write-on circuit labels. The block supports a maximum amperage of 100A per block and 30A per circuit, with a maximum voltage of 32V DC, mounts with #8 screws (M4), and weighs 0.25 lb (0.11 kg). This product is branded by Blue Sea.
|
$ 46,88
-
+
| ||
|
1-2 weeks delivery time The ST Blade Compact Fuse Blocks - 8 Circuits provides efficient circuit protection for ATO®/ATC® fuses, designed for easy installation and safety in various applications. It offers surface mount protection in a compact footprint and is ignition protected when the cover is secure, meeting ISO 8846 and SAE J1171 standards for gasoline engine compartments. The single side design allows for wire entry from one side, and the insulating cover meets ABYC/USCG insulation requirements. Constructed with tin-plated copper buses and fuse clips for enhanced durability, it accepts ring or snap fork type terminals and includes eight write-on circuit labels for easy identification. The block supports a maximum amperage of 100A per block and 30A per circuit, with a maximum voltage of 32V DC. It mounts using #8 screws (M4), features terminal stud torque of 24 in-lb (2.71 Nm) and screw terminal torque of 18 in-lb (2.03 Nm), and weighs 0.40 lb (0.18 kg). This product is branded by Blue Sea.
|
$ 96,82
-
+
| ||
|
1-2 weeks delivery time The 3 Amp push button reset circuit breaker is designed for branch circuit protection in various marine applications. It provides 24-hour circuit protection and features a quick connect terminal style compatible with Blue Sea Systems WeatherDeck Waterproof Circuit Breaker Panels, Dual Battery Bank Main Distribution Panels, and 360 Distribution Panels. Its compact design allows for high-density circuit protection configurations, and it has a push-to-reset operation for easy resetting after tripping. The "Trip Free" design ensures it cannot be held "ON" during fault current conditions, and it is ignition protected for safe installation aboard gasoline-powered boats. An optional waterproof boot is available to protect the circuit breaker in wet environments. This product has a maximum voltage of 32V DC, panel mount specifications of 3/8-27 UNS, and is branded by Blue Sea.
|
$ 10,23
-
+
| ||
What types of marine electrical supplies are essential for maintaining a boat's electrical system?
Essential marine electrical supplies for maintaining a boat's electrical system include a large selection of Marine Wiring, battery terminals, and connectors to ensure proper connections and replacements as needed. A marine electrician may guide you in choosing the right wire selection and other components, making it handy to know the specific needs of your boat. Regularly replacing worn battery terminals and ensuring all connections are secure will help prevent issues and keep the electrical system functioning optimally.
Additionally, with a switch with alternator field disconnect, you can receive everything needed to protect your electrical system, whether you are using a single battery or managing a larger setup. These on-off battery switches are designed for easy integration into your boat's electrical system, and classic models like those listed on the business page offer a large selection to fit various needs. They can handle problems associated with heavy loads and are built to carry the demand generally required for marine applications, providing excellent customer service and reliability. Whether you need a simple switch or a more complex setup for parallel battery management, there are options available to ensure seamless power management on your boat.
What are the common repair needs for marine electrical systems?
Common repair needs for marine electrical systems often involve replacing corroded or worn-out wiring, blown fuses, and faulty connections. Ensuring a reliable boat electrical system requires a selection of marine electrical supplies, such as replacement terminals and connectors. It's crucial to carry out these repairs promptly to maintain the safety and functionality of your boat.
For advanced integration and diagnostic tools, explore solutions from Actisense.
What are the key features to look for in marine electrical shop light?
When choosing a marine electrical shop light, key features to look for include durability and water resistance to withstand harsh marine environments, energy efficiency to help conserve onboard power, and brightness levels sufficient for performing detailed maintenance or repair work. Long-lasting LED technology is also essential for minimizing energy consumption and ensuring consistent performance.
For enhanced versatility, look for lights with adjustable mounting options, which allow for flexible positioning in tight or awkward spaces. Integrating such lighting solutions into a well-managed electrical system—like one supported by a Blue Sea Add a Battery kit—ensures reliable power delivery and safe operation of all onboard components.