Sherwood pumps are widely used in marine engine cooling systems to circulate raw water through heat exchangers and other cooling components. Sherwood raw water pumps are designed for continuous marine operation and are available in different configurations to suit a range of inboard engines and cooling-system layouts. The category includes Sherwood water pumps, replacement pumps, impellers, seals, gaskets, covers, shafts, service kits, and other Sherwood parts used for maintenance and repair. When selecting a replacement pump or spare part, the pump model, engine application, original part number, mounting arrangement, and connection sizes should be checked carefully.
|
1-2 weeks delivery time The Sherwood P1741-01 is a bronze impeller pump with a listed shipping weight of 8.50 kg.
|
$ 2,345.95
-
+
| |||
|
1-2 weeks delivery time The Sherwood P1743-01 is a bronze impeller pump from Sherwood with a shipping weight of 8.70 kg.
|
$ 2,345.95
-
+
| |||
|
1-2 weeks delivery time The Sherwood P1744-01 is a bronze impeller pump from Sherwood with a listed shipping weight of 8.60 kg.
|
$ 2,551.24
-
+
| |||
|
1-2 weeks delivery time The Sherwood P176X bronze impeller pump is an impeller pump from Sherwood with a listed shipping weight of 7.20 kg.
|
$ 2,964.30
-
+
| |||
|
1-2 weeks delivery time The Sherwood P2708X is a self-priming bronze impeller cooling water pump from the 27000 pump series for flange mounting with 4 fixing points. It is driven via the shaft end with a drive flange (coupling), uses a spline-drive impeller hub, and is supplied with a neoprene impeller in a cam configuration. Connection is via square flange connections with 4 fixing points, and the listed shipping weight is 7.70 kg.
|
$ 1,917.57
-
+
| |||
|
1-2 weeks delivery time The Sherwood P2713 bronze impeller pump is supplied with an outlet piece and has a listed shipping weight of 8.20 kg.
|
$ 1,998.46
-
+
| |||
|
1-2 weeks delivery time The Sherwood R10870G is a bronze impeller pump from Sherwood with a listed shipping weight of 3.00 kg.
|
$ 1,992.83
-
+
| |||
|
1-2 weeks delivery time The Sherwood R50G is a bronze impeller pump from Sherwood with a listed shipping weight of 2.70 kg.
|
$ 1,998.37
-
+
| |||
|
1-2 weeks delivery time The Sherwood 14160 pump body is a replacement pump housing component from Sherwood with a shipping weight of 0.70 kg.
|
$ 419.70
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00252 gasket is a cover gasket from Sherwood with a listed shipping weight of 0.10 kg.
|
$ 6.26
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00336 drain plug is a Sherwood spare part with a listed shipping weight of 0.10 kg.
|
$ 8.03
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00339 drain plug is a Sherwood spare part supplied with a shipping weight of 0.10 kg.
|
$ 10.78
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00343 is a serrated washer with a listed shipping weight of 0.10 kg.
|
$ 2.07
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00413 pin is a Sherwood spare part with a listed shipping weight of 0.10 kg.
|
$ 21.60
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00528 pin is a Sherwood replacement pin with a listed shipping weight of 0.10 kg.
|
$ 90.60
-
+
| |||
|
1-2 weeks delivery time The Sherwood 00727 shaft key is a small Sherwood spare part with a listed shipping weight of 0.10 kg.
|
$ 3.37
-
+
| |||
|
1-2 weeks delivery time The Sherwood 01311 pin is a Sherwood spare part with a shipping weight of 0.10 kg.
|
$ 9.34
-
+
| |||
|
1-2 weeks delivery time The Sherwood 01482 cover screw is a replacement fastener supplied as a Sherwood spare part. Shipping weight: 0.10 kg.
|
$ 2.56
-
+
| |||
|
1-2 weeks delivery time The Sherwood 02075 graphite bushing is a small replacement component with an inner diameter of approximately 12.7 mm, an outer diameter of approximately 19.1 mm, and a length of approximately 23.9 mm. Shipping weight is 0.10 kg.
|
$ 55.97
-
+
| |||
|
1-2 weeks delivery time The Sherwood 04257 is a ball bearing with a shipping weight of 0.20 kg.
|
$ 59.17
-
+
| |||
What are Sherwood raw water pumps used for?
Sherwood raw water pumps are used in marine cooling systems to draw seawater or freshwater from outside the vessel and circulate it through the engine cooling circuit or heat exchanger.
They are commonly installed on inboard marine engines and other equipment that requires a reliable external cooling-water supply.
How do I choose the correct Sherwood pump?
The correct Sherwood pump should be identified by the existing pump model, engine make and model, original part number, mounting arrangement, shaft or drive type, and inlet and outlet connection sizes.
Similar-looking Sherwood pumps may differ internally or use different mounting configurations, so the original reference should be checked whenever possible.
What is the difference between a Sherwood water pump and a raw water pump?
In marine applications, the term Sherwood water pump often refers to a raw water pump that circulates external water through the engine cooling system. Raw water pumps are different from freshwater circulation pumps used within a closed cooling circuit.
The exact pump function should be confirmed from the engine or cooling-system documentation.
What Sherwood parts are commonly replaced during maintenance?
Common Sherwood parts used during servicing may include impellers, seals, gaskets, wear plates, covers, shafts, bearings, and complete service kits.
The required parts depend on the specific pump model and the condition of the existing components.
How often should a Sherwood raw water pump be inspected?
The pump and impeller should be inspected regularly as part of the engine cooling-system maintenance schedule. Inspection frequency depends on operating hours, water conditions, pump model, and engine manufacturer recommendations.
Reduced cooling-water flow, leaks, unusual noise, or overheating may indicate that the pump requires inspection or servicing.
Can a Sherwood pump be rebuilt instead of replaced?
Many Sherwood pumps can be serviced using individual replacement parts or repair kits when the main pump housing and other major components remain in suitable condition.
The extent of repair depends on wear to the shaft, bearings, seals, cover, cam, and other internal components.
What information is needed to identify Sherwood replacement parts?
Useful information includes the Sherwood pump model, part number, engine manufacturer and model, photographs of the existing pump, connection sizes, and any numbers stamped or printed on the housing.
These details help distinguish between similar pumps and identify compatible Sherwood parts or service kits.
