Sherwood pumps are widely used in marine engine cooling systems to circulate raw water through heat exchangers and other cooling components. Sherwood raw water pumps are designed for continuous marine operation and are available in different configurations to suit a range of inboard engines and cooling-system layouts. The category includes Sherwood water pumps, replacement pumps, impellers, seals, gaskets, covers, shafts, service kits, and other Sherwood parts used for maintenance and repair. When selecting a replacement pump or spare part, the pump model, engine application, original part number, mounting arrangement, and connection sizes should be checked carefully.
|
1-2 weeks delivery time The Sherwood 25372 adapter piece is a Sherwood component intended for the Sherwood G1510 bronze impeller pump. Shipping weight: 0.70 kg.
|
$ 544.57
-
+
| |||
|
1-2 weeks delivery time The Sherwood 25384 shaft is a Sherwood replacement component identified by part number 25384.
|
$ 891.64
-
+
| |||
|
1-2 weeks delivery time The Sherwood 25390 panel cover is a counterclockwise version replacement cover component.
|
$ 129.13
-
+
| |||
|
1-2 weeks delivery time The Sherwood 25393S is a mechanical seal component supplied under the Sherwood brand.
|
$ 105.36
-
+
| |||
|
1-2 weeks delivery time The Sherwood 25394 is a major repair kit supplied without a shaft. It is intended for servicing and overhaul work where the shaft is not included.
|
$ 619.97
-
+
| |||
|
1-2 weeks delivery time The Sherwood 25395 major repair kit is a large maintenance kit supplied without a shaft. It is listed as compatible with the Sherwood G1010 pump and is an alternative to the Sherwood minor service kit 25073 and 25073-SHW. Shipping weight: 0.70 kg.
|
$ 293.64
-
+
| |||
|
1-2 weeks delivery time The Sherwood 25396 service kit is a major repair kit supplied without a shaft. Shipping weight: 0.80 kg.
|
$ 335.64
-
+
| |||
|
1-2 weeks delivery time The Sherwood 26000 impeller is a Sherwood replacement impeller with a listed shipping weight of 0.90 kg.
|
$ 425.49
-
+
| |||
|
1-2 weeks delivery time The Sherwood 26000K impeller kit is a neoprene impeller used as standard in many impeller pumps on board for pumping simple media such as water. It has a 95 mm diameter, 23.8 mm shaft diameter, 80 mm depth, and 12 blades, with a listed shipping weight of 1.00 kg.
|
$ 426.52
-
+
| |||
|
1-2 weeks delivery time The Sherwood 27000 impeller is a Sherwood replacement impeller with a listed shipping weight of 0.80 kg.
|
$ 226.74
-
+
| |||
|
1-2 weeks delivery time The Sherwood 27000K impeller kit is a neoprene replacement impeller for Sherwood impeller pumps used for pumping simple media such as water. Key dimensions are 84 mm diameter, 19 mm shaft diameter, and 73 mm depth, with a 12-blade design and an approximate shipping weight of 1.00 kg.
|
$ 227.14
-
+
| |||
|
1-2 weeks delivery time The Sherwood 29000 impeller is a Sherwood spare part with a listed shipping weight of 1.10 kg.
|
$ 528.46
-
+
| |||
|
1-2 weeks delivery time The Sherwood 29000K impeller kit is a neoprene impeller used as standard in many Sherwood impeller pumps for pumping simple media such as water. It measures 95 mm in diameter and 102 mm in depth, with 12 blades, and has a shipping weight of 1.40 kg.
|
$ 522.47
-
+
| |||
|
1-2 weeks delivery time The Sherwood 30000 impeller is a Sherwood spare part with a listed shipping weight of 1.40 kg.
|
$ 785.63
-
+
| |||
|
1-2 weeks delivery time The Sherwood 30000K impeller kit is a neoprene replacement impeller used in many impeller pumps on board for pumping simple media such as water. It has a 114 mm diameter, 110 mm depth, a 10-tooth spline keyway, and 10 blades, with a shipping weight of 1.50 kg.
|
$ 786.35
-
+
| |||
|
1-2 weeks delivery time The Sherwood 97176 flange is a Sherwood component with a listed shipping weight of 0.50 kg.
|
$ 192.77
-
+
| |||
|
1-2 weeks delivery time The Sherwood X15000 impeller is a Sherwood spare part with a listed shipping weight of 0.30 kg.
|
$ 110.02
-
+
| |||
|
1-2 weeks delivery time The Sherwood 11811 filter is a 40 mesh filtration component with a shipping weight of 0.10 kg.
|
Our managers will contact you and clarify the terms of the order
| |||
|
1-2 weeks delivery time The Sherwood 16126 filter is a 20-mesh filter with a listed shipping weight of 0.20 kg. It is no longer available; the closest replacement is Sherwood 18029.
|
Our managers will contact you and clarify the terms of the order
| |||
|
1-2 weeks delivery time The Sherwood 18010 inline strainer is a 3/4-inch strainer specified as 20/80 mesh. Shipping weight is 0.40 kg. This item is no longer available; the closest replacement listed is Sherwood 18001.
|
Our managers will contact you and clarify the terms of the order
| |||
What are Sherwood raw water pumps used for?
Sherwood raw water pumps are used in marine cooling systems to draw seawater or freshwater from outside the vessel and circulate it through the engine cooling circuit or heat exchanger.
They are commonly installed on inboard marine engines and other equipment that requires a reliable external cooling-water supply.
How do I choose the correct Sherwood pump?
The correct Sherwood pump should be identified by the existing pump model, engine make and model, original part number, mounting arrangement, shaft or drive type, and inlet and outlet connection sizes.
Similar-looking Sherwood pumps may differ internally or use different mounting configurations, so the original reference should be checked whenever possible.
What is the difference between a Sherwood water pump and a raw water pump?
In marine applications, the term Sherwood water pump often refers to a raw water pump that circulates external water through the engine cooling system. Raw water pumps are different from freshwater circulation pumps used within a closed cooling circuit.
The exact pump function should be confirmed from the engine or cooling-system documentation.
What Sherwood parts are commonly replaced during maintenance?
Common Sherwood parts used during servicing may include impellers, seals, gaskets, wear plates, covers, shafts, bearings, and complete service kits.
The required parts depend on the specific pump model and the condition of the existing components.
How often should a Sherwood raw water pump be inspected?
The pump and impeller should be inspected regularly as part of the engine cooling-system maintenance schedule. Inspection frequency depends on operating hours, water conditions, pump model, and engine manufacturer recommendations.
Reduced cooling-water flow, leaks, unusual noise, or overheating may indicate that the pump requires inspection or servicing.
Can a Sherwood pump be rebuilt instead of replaced?
Many Sherwood pumps can be serviced using individual replacement parts or repair kits when the main pump housing and other major components remain in suitable condition.
The extent of repair depends on wear to the shaft, bearings, seals, cover, cam, and other internal components.
What information is needed to identify Sherwood replacement parts?
Useful information includes the Sherwood pump model, part number, engine manufacturer and model, photographs of the existing pump, connection sizes, and any numbers stamped or printed on the housing.
These details help distinguish between similar pumps and identify compatible Sherwood parts or service kits.
