Rheinstrom refers to a brand specialized in marine equipment, particularly known for their toilets, pumps, and specific models like the Rheinstrom Y4 and Y10. Rheinstrom pumps, including their "pumpen" or pump systems, are designed for use on yachts and boats, providing essential services like waste disposal and water circulation. The Rheinstrom toilet systems are well-regarded for their robust design and efficiency in marine sanitation.
|
1-2 weeks delivery time Price incl. 19% VAT Electric deck pump. The pump is made of bronze and stainless steel. Centrifugal pump shall be located below the waterline. Maximum running time: 120 min. Connection: 25 mm. Water rise: 6 m.
|
€ 370,55
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The electric deck pump, resistant to salt water, does not require maintenance. It is made of bronze and steel. Centrifugal pump with automatic suction. It is recommended to install the check valve on the funnel. Maximum operating time: 120 min. Connectors: 19 mm. Water intake height: 3 meters. Water discharge height: 13 meters.
|
€ 1.071,84
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The electric deck pump, resistant to salt water, with automatic suction, is made of bronze and steel. Install the check valve on the funnel to prevent no-load. Installation above the waterline is possible. Maximum operating time: 180 min. Connectors: 25 mm. Water intake height: 6 m. Water discharge height: 18 m.
|
€ 2.594,50
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT It is suitable as a bilge pump or for pumping black water. It is made of aluminum. The long lever facilitates control. Large valves prevent contamination. Both horizontal and vertical installation is possible. Never clamp contacts! Connectors: 38 mm. Water intake height: 7 m. Water discharge height: 10 m.
|
€ 661,86
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT It works as a bilge pump, as well as a black water pump. It is made of white aluminum with a bronze coating. If clogged, remove the cover and clean the pump. It works from a powerful 12V or 24V electric motor, silent. Connectors: 38 mm. Water intake height: 3.5 m. Water discharge height: 10 m. Maximum duration of operation: 180 minutes.
|
Type:
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Designed for pumping black water from the hold. The body is made of white aluminum or bronze. Low noise, powerful electric motor 12 or 24 volts. Hose connectors rotate 270 degrees. Connection: 38 mm. Water intake height: 5 m. Water discharge height: 8 m. Maximum duration of operation: 180 minutes.
|
€ 1.231,76
Type:
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Sewage tank pump. Stainless steel or bronze housing. There is no automatic pumping function - connect the pump to the tank as low as possible. The structural elements are easily disassembled for cleaning and maintenance. Maximum duration: 120 min/h. Water bleed height: 5 m. Inlet connector: 2 "- 50 in/mm. Output connector: 1 "- 25 in/mm. Dimensions: 270 x 125 x 140 mm.
|
€ 592,19
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Designed for pumping out large fecal tanks with a volume of 1 m³ or more. Stainless steel or bronze housing. There is no automatic pumping function - connect the pump to the tank as low as possible. Water outlet height: 6 m. Inlet connector: 2 "- 50 in/mm. Output connector: 1 "- 25 in/mm. Dimensions: 390 x 180 x 140 mm.
|
€ 1.637,24
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Designed for integration into fecal containers. The body is made of bronze and stainless steel. The motor is mounted on the cover. The set includes a suction pipe from 200 to 600 mm. It is necessary to select a model according to the following principle - pump immersion depth = tank depth minus 40 mm. Maximum duration: 120 min/h. Water discharge height: 5 m. Output connector: 1 "- 25 in/mm. Diameter: 195 mm.
|
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Fuel pump with automatic suction for diesel and diesel fuel. The body and gears are made of bronze, the axis is made of stainless steel. It is equipped with a mechanical axial seal. Maximum duration: 120 min/h. Fuel intake height: 3 m. Fuel diversion height - 15 m. Dimensions: 180 x 100 x 120 mm. Input connector: 3/8 "in/mm.
|
€ 904,37
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Automatic drain station. The built-in electronic system allows you to tilt the structure up to 45 degrees. The body is made of durable polyethylene or stainless steel. The check valve prevents water from penetrating back. Maximum duration of work: 30 min/h. Water discharge height: 6 m. Input connector: 1 1/2 "- 38 in/mm. Dimensions: 550 x 310 x 250 mm.
|
€ 1.681,26
Type:
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The water in the Y8 model is drained using a separate pump or hydraulic unit, which significantly reduces noise. The toilet is virtually maintenance-free. For an additional fee, the toilet will be equipped with an electric switch. In this case, the foot pedal and ball valve are replaced by a panel and a magnetic valve. The toilet body rotates 360 degrees without the help of an adapter. Water bleed height: 5 m. Inlet connector: 3/4 "- 19 in/mm. Output connector: 1 "- 25 in/mm. Power: 300 watts.
|
€ 2.034,35
Voltage:
Item:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Automatic drain. By pressing the foot pedal, the pump starts and the ball valve opens. Within 8 seconds, the toilet is washed and pumped out. An effective bronze cutting mechanism grinds the faeces into the smallest grains. The entire structure is made of high-quality materials - stainless steel, bronze and porcelain. The bowl rotates 360 degrees without the aid of an adapter. Water diversion height: 5 m Water intake height: 1 m Inlet connector: 3/4 "- 19 in/mm. Output connector: 1 "- 25 in/mm. Power: 300 watts.
|
€ 2.189,02
Voltage:
Item:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This beautiful polyester pump casing is suitable for Y10 and Y8 types. Provides better hygiene around the toilet. In addition, the case increases sound insulation.
|
€ 666,60
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The model is Y12-W built into the wall, the only moving part of the structure is the control button. A pump for this toilet can be installed in another room to eliminate noise. Separate buttons flush the toilet and activate the pump for pumping. Complete control panel, Rheinstrom-M electric diaphragm pump and 1 meter hose. Water diversion height: 8 m. Water intake height: 5 m. Input connector: 1 1/2 "- 38 in/mm. Output connector: 1 1/2 "- 38 in/mm. Power: 300 watts.
|
€ 2.015,06
Voltage:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Ideal model for sports yachts. A good combination of price and quality. Pump and support are made of bronze with nylon coating. The long adjustment handle facilitates manipulation. The bowl rotates 180 degrees without the aid of an adapter. Included is a white wooden seat. Water diversion height: 6 m. Water intake height: 2 m. Inlet connector: 3/4 "- 19 in/mm. Output connector: 1 1/2 "- 38 in/mm. Sizes: Compact: 360/445x390x370 mm; Comfort: 370/450x460x400 mm (wide x lengths x height).
|
€ 1.602,40
Type:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Durable lightweight aluminum toilet. Suitable for use on sailboats. The small size and the possibility of installation close to the wall free up space in the toilet room. The universal fastening system allows you to easily and quickly replace your toilet with the Y3 model. The toilet is protected from corrosion thanks to the use of waterproof materials. Water diversion height: 10 m Water intake height: 4 m Inlet connector: 3/4 "- 19 in/mm. Output connector: 1 1/2 "- 38 in/mm.
|
€ 1.432,40
Type:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This toilet will provide you with the usual home comfort. Pump and support are made of bronze with nylon coating. Large valves practically eliminate blockages. The long adjustment handle facilitates control. The bowl rotates 180 degrees without the aid of an adapter. included is a white plastic seat. Water diversion height: 6 m. Water intake height: 2 m. Inlet connector: 3/4 "- 19 in/mm. Output connector: 1 1/2 "- 38 in/mm.
|
€ 2.633,51
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The toilet is offered in 2 models - Y7 with a small bowl and Y7G with a large bowl. The stand is made of bronze with a nylon coating, the bowl is made of porcelain. Both models are offered along with a white seat. Included is a 3/4 "x 19 mm hose.
|
€ 840,21
Item:
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The water heaters of this series have an internal 316 stainless steel tank. Suitable for both vertical and horizontal installation. The set includes a 230V/ 800W heating element, a tank, a heating element, a cold water hose, steel brackets and connectors.
|
€ 670,22
Size, mm:
| ||
Show more
1
2
How do Rheinstrom pumps function, and what applications do they have on yachts and boats?
Rheinstrom pumps, including specific models like Rheinstrom Y4 and Y10, are designed to operate efficiently in marine environments, particularly on yachts and boats. These pumps function by transferring fluids, such as water and waste, through various onboard systems, often working in conjunction with Rheinstrom toilet systems. Whether used for sanitation, bilge pumping, or fresh water supply, Rheinstrom's pumps and pomp components are integral to maintaining essential hydraulic functionalities on maritime vessels.
What are the main features of Rheinstrom toilet systems, and how are they adapted for marine use?
Rheinstrom toilet systems are specifically engineered for marine use, featuring robust construction, efficient waste disposal, and often integration with Rheinstrom pumps, including models like Rheinstrom Y4 and Y10. Adapted to withstand the challenging maritime environment, these toilet systems utilize Rheinstrom pumpen technology to effectively manage waste, minimizing water usage, and ensuring reliability. The combination of these features makes Rheinstrom toilets an essential part of onboard sanitation solutions for yachts and boats.
What are the specifications of the Rheinstrom pomp, and how does it contribute to the overall efficiency of a vessel's hydraulic system?
Rheinstrom pomp (pump systems) are specifically designed to handle various hydraulic needs on yachts and boats, including supporting Rheinstrom toilet systems and other fluid transfer applications. With models like the Rheinstrom Y4 and Y10, these pumps often feature specifications such as corrosion resistance, variable flow rates, and high efficiency in fluid transfer. By meeting these specifications, Rheinstrom pomp contributes to the overall efficiency of a vessel's hydraulic system, ensuring reliable performance and reducing energy consumption in marine environments.