|
1-2 weeks delivery time The Steyr 2301138-0 marine adapter cable assembly is intended for connection of a temperature sensor in Steyr marine engine installations. Supplied as a spare part for Steyr engines, it is specified as an adapter cable for marine temperature sensor applications.
|
$ 277.17
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301141-0 adapter cable assembly is an electrical connection component intended for a marine rack sensor in Steyr engine installations. Supplied as a spare part for Steyr engines, it is specified as an adapter cable for the marine rack sensor interface.
|
$ 457.30
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301142-0 adapter cable assembly is an electrical connection component intended for a marine throttle potentiometer on Steyr engine installations. It is supplied as a spare part for Steyr engines and is identified by Steyr Motors part number 2301142-0.
|
$ 641.19
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301322-0 sensor test adapter is a 9-pin diagnostic interface component supplied as a spare part for Steyr engines. It is specified as a test adapter for a 9-pin sensor connection and is intended for use within Steyr Motors engine service and testing applications.
|
$ 1,029.41
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301323-0 sensor adapter cable assembly is an electrical connection component intended to interface a marine MAP sensor and an LPS sensor on Steyr engine installations. It is supplied as a spare part for Steyr engines.
|
$ 458.27
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301324-0 adapter cable assembly is a spare part intended for Steyr engine installations and identified for use with a Marine Rack Sensor connection. It is supplied as an original replacement component for Steyr Motors marine engine systems.
|
$ 328.28
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301326-0 adapter cable assembly is an electrical interface lead intended for a marine solenoid on Steyr engine installations. It is supplied as a spare part for Steyr engines and is identified by Steyr Motors part number 2301326-0.
|
$ 391.78
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301327-0 ITD adapter cable is an engine electrical interface component supplied as a spare part for Steyr engine applications. Identified as an adapter cable for ITD, it is intended for integration within Steyr engine systems where this specific cable assembly is required.
|
$ 377.62
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301332-0 adapter cable assembly is a spare part intended for connecting a marine RPM sensor within Steyr engine installations. It is supplied as a dedicated adapter cable for Steyr marine engine applications.
|
$ 455.48
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301333-0 adapter cable assembly is a spare part for Steyr engines, intended to connect a marine temperature sensor on installations up to year 2012. It is specified as an adapter cable for marine temperature sensor applications within Steyr engine systems.
|
$ 328.28
-
+
| ||
|
1-2 weeks delivery time The Steyr 2301334-0 adapter cable assembly is a spare part for Steyr engines, specified for Marine P-Oil and P-Boost connections. It is supplied as an original Steyr Motors component under part number 2301334-0.
|
$ 296.94
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 2301335-0 adapter cable assembly is an electrical connection component for a marine throttle potentiometer on Steyr engine installations. Supplied as a spare part for Steyr engines, it is intended to interface the marine throttle potentiometer via an adapter cable connection.
|
$ 600.28
-
+
| ||
|
1-2 weeks delivery time The Steyr 2306031-1 holder bracket is a spare-part mounting component for an engine control gauge used on 6-cylinder Steyr engines, specified as a bracket for an engine timing set. It is supplied for Steyr engine service work where the engine control gauge or timing gauge requires secure positioning during measurement or adjustment.
|
$ 3,500.78
-
+
| ||
|
1-2 weeks delivery time The Steyr 2306031-6 timing gauge holder bracket is a spare part for Steyr engines, intended to support an engine timing gauge during timing measurement and setup on 6-cylinder applications. The input identifies it as a holder for an engine timing gauge and references an M16 engine timing set designation.
|
$ 979.09
-
+
| ||
|
1-2 weeks delivery time The Steyr 2309135-0 piston-pin wire snap ring is a round wire retaining ring supplied as a spare part for Steyr Motors engine applications. It is specified as a wire snap ring for the piston pin and is listed as compatible with Steyr MO266K43, MO256H45, and MO256K43 engines.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 3490767-0 electrical contact wedge component is a spare part for Steyr engines used with a 4-pin socket housing arrangement, specified as a retainer for a plug with 4 contacts. It is identified as a contact wedge for a 4-pin socket housing and described as a retainer for 4-contact plug assemblies.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 3800083-0 hex head bolt component is specified as an ISO 4014 fastener in size M10x110 with property class 8.8 and A3C designation. Supplied as a spare part for Steyr engine applications, it is identified in the documentation as a hex head bolt with shank.
|
$ 6.59
-
+
| ||
|
1-2 weeks delivery time The Steyr 3860150-0 socket head cap screw is a DIN 912 / ISO 4762 fastener specified as M12x60 with property class 12.9 and design variant D. It is supplied as a spare part for Steyr engine applications and is identified as a hex socket head cap screw.
|
$ 9.18
-
+
| ||
|
1-2 weeks delivery time The Steyr 3870032-0 hexagonal nut is an ISO 8673 fastener specified as M20x1.5 with property class 8 and designation A, DAC, A500. It is supplied as a spare part for Steyr engine applications.
|
$ 5.19
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 3930076-0 flat washer is a standardized engine hardware component specified as DIN 125 and ISO 7089, with designation A21-140HV and surface/coating specification DAC A500. Supplied as a spare part for Steyr engines, it is intended for use where an ISO 7089 / DIN 125 washer of size 21 and hardness 140HV is required.
|
$ 2.79
-
+
| ||