|
1-2 weeks delivery time The Steyr 2179176-0 protective cap component is a rubber protection cap supplied as a spare part for Steyr engines. Identified by part number 2179176-0, it is intended for use where a protective rubber cap is required within Steyr engine installations.
|
$ 8.59
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179182-1 connection parts set is intended for a single engine control cable installation on Steyr engines. Supplied as a spare part, it is specified as connection parts for an engine control cable in single configuration.
|
$ 274.99
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179329-7 between-joint assembly is an 8-hole, painted driveline joint supplied as a spare part for Steyr engines. It is identified as an EG between joint and is intended for Steyr Motors engine-related applications where this specific joint configuration is required.
|
$ 3,701.68
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179340-0 instrument panel assembly is a 12V SOLAS Marine electrical control and indication panel supplied as a spare part for Steyr engines. Identified as an instrument panel unit, it is specified for 12-volt installations and listed as an original replacement component for Steyr engine applications.
|
$ 8,400.60
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179370-0 sealing push-in cap is a plastic closure cap specified as 62x10 and supplied as a spare part for Steyr engine applications. It is intended to provide a sealed push-in closure where this cap type is used on Steyr engines.
|
$ 68.51
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179498-0 external marine E-box assembly is a Steyr Motors spare part supplied as an E-box assembly for marine installations. It is specified as an “external” marine E-box unit and is intended for use on Steyr engines.
|
$ 7,592.64
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179555-0 sealing ring is an O-ring specified as 82.27x1.78 and supplied as a spare part for Steyr engine applications.
|
$ 4.20
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179562-0 threaded adapter component is a spare part for Steyr engines, specified as a thread adapter with a 3/8-18 PTF connection to an M12x1.5 thread interface.
|
$ 131.39
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 2179597-0 connector fitting is a 0° connector specified with 3/8 to 5/16 sizing and supplied as a spare part for Steyr engine applications.
|
$ 28.55
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179598-0 adapter socket assembly is a 3/8 adapter component supplied as a spare part for Steyr engines. It is identified as a Steyr Motors replacement part and specified as an adapter socket in 3/8 size.
|
$ 16.57
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179665-0 fuel pre-filter assembly with integrated water separator is a spare part intended for Steyr engine fuel system installations, providing pre-filtration and separation of water from the fuel supply upstream of the engine.
|
$ 1,545.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179670-0 radial shaft sealing ring is a rotary shaft seal specified in size 62x85x10 for Steyr engine spare-part applications.
|
$ 311.31
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179684-0 identification sticker is a spare-part label intended for the engine room and supplied in English and Chinese. It is specified as a replacement part for Steyr engine installations.
|
$ 29.76
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179716-0 water pump assembly is a replacement cooling-system pumping unit supplied as a spare part for Steyr engines. It is provided as a complete water pump assembly for Steyr Motors engine applications.
|
$ 687.14
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179854-2 hollow screw component is a restricted through-type fitting with M10x1 thread specification, supplied as a spare part for Steyr engines.
|
$ 72.50
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179874-0 protocol converter module is a J1939 to NMEA2000 converter supplied as a spare part for Steyr engine installations. It is intended to interface J1939 and NMEA2000 communication networks as specified for Steyr engines.
|
$ 6,364.56
-
+
| ||
|
1-2 weeks delivery time The Steyr 2179937-0 alternator unit is a 28 V, 110 A charging-system component specified for 6-cylinder Steyr engines. It is identified as an additional alternator and supplied as a set including a raw water pump; this spare part is stated to be used only in conjunction with the engine.
|
$ 16,782.80
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 2179977-0 protective cap is a spare part intended for use on Steyr engines, supplied as a protection component for engine applications.
|
$ 114.81
-
+
| ||
|
1-2 weeks delivery time The Steyr 2180113-0 bearing retainer ring is an original spare part intended for Steyr engine applications. It is supplied as a bearing retention component for Steyr Motors installations and is identified by part number 2180113-0.
|
$ 124.20
-
+
| ||
|
1-2 weeks delivery time The Steyr 2180114-0 adapter component is a belt tensioner adapter supplied as a spare part for Steyr engines.
|
$ 853.07
-
+
| ||