|
1-2 weeks delivery time The Steyr VR00118-0 crankshaft front seal installation tool set is a service tool intended for installing the front crankshaft seal on Steyr engines. Supplied as a spare part for Steyr engine service and maintenance operations.
|
$ 1,479.51
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00121-0 suction bulb component is supplied as a spare part for Steyr engines. It is identified in the input as a suction balloon and suction bulb unit for Steyr Motors applications.
|
$ 304.32
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00122-0 camshaft seal installation tool set is a press-in tool intended for installing the rear camshaft seal on Steyr engines. Supplied as a spare part tool, it is specified as an insert/installation device for camshaft seal fitment.
|
$ 1,040.18
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors VR00124-0 long hexagon socket component is an Allen socket with size 6 intended for 1/2 inch drive use. Supplied as a spare part for Steyr engine applications, it is identified in the product information as a long version socket.
|
$ 80.07
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00125-0 Torx fastening component is specified as a Torx nut for valve adjustment on Steyr engines. It is supplied as a spare part for Steyr engine service work and is identified in the input as “Torx Nut (Valve settings)” with a T40x120 designation.
|
$ 397
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00126-0 unit injector lifting lever is a Steyr Motors spare part intended for Steyr engine applications. This component is identified as a lifting lever for the unit injector system.
|
$ 1,003.93
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors VR00130-0 engine lifting chain is a load-handling component specified with a maximum capacity of 500 kg for lifting Steyr engines during service and installation work. It is supplied as a spare part for Steyr engine applications.
|
$ 1,345.44
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00132-0 collecting pan component is a service tool intended for oil filter change procedures on Steyr engines. Supplied as a spare part, it is used to catch and contain oil during oil filter replacement operations.
|
$ 386.28
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00133-3 injection disengagement cover is a spare part intended for Steyr SE series engines. It is identified in the product information as a cover for the injection disengagement function on SE engines and is supplied as a replacement component for Steyr engine applications.
|
$ 4,647.01
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00135-1 diagnostic switch assembly is supplied with a 5 m cable and is intended as a spare part for Steyr engine diagnostic interfaces. This switch-and-cable set supports diagnostic operation where a dedicated diagnostic switch connection is required.
|
$ 233.61
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00136-0 compression measurement instrument is a service tool intended for measuring parameters on exhaust, fuel, and raw water circuits, as indicated for Steyr engine applications. Supplied as a spare part tool for Steyr engines, it is identified as a compression measurement tool for exhaust, fuel, and raw water measurements.
|
$ 2,418.24
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00144-0 exhaust elbow end-cap component is a spare part for Steyr engines, intended as an end cap for the exhaust elbow assembly. It is identified in the supplied information as an end cap for an exhaust elbow and is listed as a replacement part for Steyr engine exhaust system service.
|
$ 116.82
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors VR00145-0 starting switch is an electrical control component intended to crank an unfired engine. Supplied as a spare part for Steyr engines, this switch is specified for engine cranking operation without firing.
|
$ 902
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors VR00146-0 long-version socket wrench assembly is a 3/8 in drive tool specified as WS10 (size 10) for Steyr engine service and spare parts support. It is supplied as a spare part for Steyr engines and identified in the product text as a Socket Wrench 10 in long configuration.
|
$ 125.60
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00148-0 mechanical control rod adjustment component is a spare part for Steyr engines, intended for mechanical adjustment of the control rod mechanism.
|
$ 242.76
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00150-0 electric oil suction pump kit is an electrically driven oil drain and extraction assembly supplied as a spare part for Steyr engines, intended to remove engine oil during servicing via suction or drain pump operation.
|
$ 1,020.63
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors VR00150-2 mechanical oil drain pump assembly is an engine service component for Steyr engines, identified with reference number O172473/0. Described as an oil suction pump and supplied as a spare part, it is specified as a mechanical oil drain pump; see also part number 5061-0.
|
$ 498.23
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00152-0 manual hand pump assembly is a pressure and negative-pressure service tool supplied as a spare part for Steyr engines. It is specified as a hand-operated pump for generating pressure or negative pressure, with the unit of supply indicated as pcs.
|
$ 1,572.55
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors VR00154-0 valve guide extraction drift is a service tool intended for pressing out valve guides during engine maintenance on Steyr engines. It is identified in the input as an extractor for the valve guide and is supplied as a spare part for Steyr engine applications.
|
$ 340.08
-
+
| ||
|
1-2 weeks delivery time The Steyr VR00215-0 blow-by measuring instrument is a service tool intended for assessing engine blow-by on Steyr engines. Supplied as a spare part for Steyr engine applications, it is identified as a blow-by meter measuring tool under part number VR00215-0.
|
$ 1,910.05
-
+
| ||