|
1-2 weeks delivery time The Steyr 2300565-0 injector bore cleaning mandrel is a service tool spare part for Steyr engines, specified for pumped insert decoking and injector bore cleaning. It is identified in the input as a cleaning pin/mandrel intended to clean the injector bore area during maintenance procedures.
|
$ 135.79
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300631-0 front-position seawater pump repair kit is a spare part intended for Steyr MO236-FDE engines. It is specified as a repair kit for the front seawater pump.
|
$ 240.25
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300636-0 crankshaft timing belt sprocket puller assembly is a service tool intended for removing the crankshaft timing belt sprocket on Steyr engines. Supplied as a spare part for Steyr engine applications, it is identified as a toothed belt wheel puller for crankshaft timing belt sprocket removal.
|
$ 922.04
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300638-2 glow plug insert adapter is a compression measurement interface component for Steyr engines, intended for use with a compression pressure gauge during compression testing. Supplied as a spare part for Steyr engine service work, it is identified in the input as an adaptor for glow plug compression test procedures.
|
$ 369.59
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300641-1 offset pointer assembly with counter nut is a spare part intended for pumped nozzle adjustment on Steyr engines. Supplied as an offset pointer with a retaining counter nut, it is specified as a service component for Steyr Motors engine applications.
|
$ 219.08
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300700-0 Allen socket component is a 10 mm hex (WS10) socket with a 1/2 inch drive, supplied as a spare part for Steyr engines. The input description also references a 10 mm hex interface for cap screws, aligning this socket with internal-hex fastener service work in Steyr engine maintenance.
|
$ 131.39
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300702-0 drive adapter component is a ratchet drive adapter specified with a 3/8 inch female drive on the inside and a 1/4 inch male drive on the outside. Supplied as a spare part for Steyr engines, it provides a drive-size interface for ratchet and tool engagement in service operations.
|
$ 55.72
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300703-0 torque wrench tool is a service and maintenance component supplied as a spare part for Steyr engines, specified with a 3/8 inch drive and torque ranges stated as 5–60 Nm, 4–40 Nm, and 4–20 Nm, and referenced as a ratcheted torque wrench in the provided part information.
|
$ 1,958.36
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300704-0 torque wrench unit is a 1/2 in drive service tool specified with a 20–120 Nm torque range for Steyr engine maintenance applications. It is supplied as a spare part/tool for Steyr engines; the source text also lists the torque-wrench range as 10–120 Nm.
|
$ 1,474.92
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 2300705-0 torque wrench tool is specified for 60 to 320 Nm tightening torque and uses a 1/2 inch drive interface. Supplied as a spare part for Steyr engines, it is intended for controlled torque application during service and assembly work.
|
$ 1,831.37
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300709-1 slotted ring-nut wrench is a dedicated service tool for oil cooler work on Steyr engines. It is specified as a Size 4 slotted ring-nut wrench and supplied as a spare part for Steyr engine applications.
|
$ 155.77
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300710-0 offset box wrench is a cranked ring wrench supplied as a spare part for Steyr engine service work. It is specified in size 30/32, providing two ring-end sizes in one tool for maintenance tasks on Steyr engines.
|
$ 257.41
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300711-0 hand tool assembly is a size 30 combination open-end and ring wrench intended as a spare part for Steyr engines. It is identified as an open-end wrench size 30 with WS30 and SW30 sizing references.
|
$ 177.73
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300712-3 feeler gauge measuring 0.25 mm is a service and inspection tool supplied as a spare part for Steyr engines. It is specified as a 0.25 mm gauge with width 13 and supersedes the previous part number 2300712-1.
|
$ 16.97
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300713-1 cartridge filter wrench is a dedicated oil filter wrench supplied as a spare part for Steyr engines, intended for installation and removal of oil filter cartridges during service operations.
|
$ 427.73
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300714-1 piston installation tool is a dedicated service tool used to support piston insertion during engine work on Steyr engines. Supplied as a spare part, it is identified in the product information as a piston insertion tool and piston slip sleeve.
|
$ 133.20
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 2300715-0 ratchet and socket set is a 1/4 inch button drive tool set supplied as a spare part for Steyr engines. It is identified in the provided information as a ratchet set with 1/4 inch drive configuration.
|
$ 1,712.95
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300716-0 ratchet and socket set is a 1/2" drive tool set specified as a ratchet set with button-drive actuation and 12-point sockets. Supplied as a spare part for Steyr engines, it is identified as a Steyr Motors item under part number 2300716-0.
|
$ 3,745.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300718-0 valve seat grinding tool is a hand-operated valve lapping device for service work on Steyr engines, specified as a valve hand lapper with a 32 mm diameter. Supplied as a spare part for Steyr engine maintenance applications.
|
$ 62.31
-
+
| ||
|
1-2 weeks delivery time The Steyr 2300736-1 eccentric shaft adjustment gauge is an engine setting tool intended for eccentric shaft adjustment on Steyr SE engines. Supplied as a spare part for Steyr engines, it is used as an adjustment gauge to support precise engine alignment during setup work.
|
$ 1,083.98
-
+
| ||