|
1-2 weeks delivery time The Steyr MA0301040 drive adapter set is a propulsion adapter spare part for Steyr engines, specified for a long sliding shaft configuration with a length of 354 mm and an 8-hole mounting pattern.
|
$ 5,439.58
-
+
| ||
|
1-2 weeks delivery time The Steyr MA0308010 repower kit set is a spare part intended for Steyr engine applications, supplied as a Mercruiser Commercial 6 cylinder repower kit including an exhaust pipe. It is identified in the product information as a complete kit for Mercruiser Commercial 6 cylinder installations.
|
$ 5,291.81
-
+
| ||
|
1-2 weeks delivery time The Steyr MA0308020 repowering kit is supplied as a spare part for Steyr engine applications and is specified for Mercruiser 4-cylinder repowering configurations. The kit is listed for COM and Stand setups and includes a coupler as part of the kit contents.
|
$ 5,393.54
-
+
| ||
|
1-2 weeks delivery time The Steyr MA0408010 drive shaft extension kit is supplied as a spare part for Steyr engine applications and is specified as a Mercury drive shaft extension kit without the shaft. The kit is also referenced for Mercury and Quicksilver applications in the provided product information.
|
$ 9,301.41
-
+
| ||
|
1-2 weeks delivery time The Steyr MA0903020 manual oil drain pump kit is a hand-operated pump kit specified for 4-cylinder Steyr engines. Supplied as a spare part, this kit is intended for manual oil draining service in Steyr engine applications.
|
$ 1,443.74
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors MA1111010 propulsion drive adapter is a drive interface component for SE Series engines, specified as a sliding-shaft adapter in the short 210 mm configuration with a 6-hole mounting pattern. Supplied as a spare part for Steyr engine propulsion installations.
|
$ 5,757.09
-
+
| ||
|
1-2 weeks delivery time The Steyr MA1111020 propulsion drive adapter is a propulsion system interface component specified as an adapter for a sliding shaft with a 354 mm length and an 8-hole mounting pattern. It is supplied as a spare part for Steyr engine installations.
|
$ 5,485.50
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors MA1111030 drive adapter kit is a spare-part drive shaft extension kit specified for Mercury applications and supplied without the shaft. It is listed as a spare part for Steyr engines and identified as a drive adapter kit for a drive shaft extension arrangement.
|
$ 8,590.69
-
+
| ||
|
1-2 weeks delivery time The Steyr MA1201020 manual oil drain pump kit is a hand-operated oil blower and drain pump kit specified for 6-cylinder Steyr engine applications. Supplied as a spare part for Steyr engines, this kit is intended for manual oil drainage service tasks.
|
$ 1,032.36
-
+
| ||
|
1-2 weeks delivery time The Steyr MA1205010 repowering set is a spare part kit for Steyr engine applications, specified for Volvo Torflex and supplied with an exhaust pipe. The input data identifies suitability for DP290 as well as R4 and R6 configurations.
|
$ 8,696.35
-
+
| ||
|
1-2 weeks delivery time The Steyr MA1410010 drive shaft extension kit is a spare-part kit specified for a Mercury Centa coupler configuration and supplied without the shaft. It is identified as a drive shaft extension kit for Steyr engine applications and is listed as a spare part for Steyr engines.
|
$ 11,148.49
-
+
| ||
|
1-2 weeks delivery time The Steyr MA2010010 hydraulic adapter hose kit is a spare parts set specified as a kit of hydraulic adapter hoses for a Bravo stern drive thread interface. It is supplied as a spare part for Steyr engine installations where this thread interface and hydraulic hose adaptation is required.
|
$ 2,787.62
-
+
| ||
|
1-2 weeks delivery time The Steyr MA2108010 front power take-off kit is a spare part for Steyr engines, specified as a front PTO kit for 4-cylinder configurations with a Visco rating of 65 Nm.
|
$ 3,855.95
-
+
| ||
|
1-2 weeks delivery time The Steyr MA2108020 front power take-off kit is a spare parts kit intended for Steyr engine installations, specified for 6-cylinder configurations with a 65 Nm rating. It is identified as a front PTO kit associated with the front axle interface.
|
$ 2,374.26
-
+
| ||
|
1-2 weeks delivery time The Steyr ME0301050 connection cable assembly is an extension cable for an engine panel with a specified length of 6.3 m. Supplied as a spare part for Steyr engines, it is intended for panel connection and extended cable routing where additional harness length is required.
|
$ 1,194.14
-
+
| ||
|
1-2 weeks delivery time The Steyr ME0301060 connection cable assembly is a 10 m extension cable intended for panel connections on Steyr engines. It is supplied as a spare part for Steyr engine installations where an extended panel cable run is required.
|
$ 1,950.98
-
+
| ||
|
1-2 weeks delivery time The Steyr ME0909040 switch panel assembly is a start/stop panel specified for SCC2 control systems and supplied as a spare part for Steyr engines. Identified as ME0909040, it is listed as a switch panel for SCC2 applications.
|
$ 2,280.48
-
+
| ||
|
1-2 weeks delivery time The Steyr ME0909050 keypad panel assembly is a SOLAS push button interface designed for SCC 2 systems on Steyr engines. Supplied as a spare part, it functions as a keypad-style control panel for operating the associated SCC 2 installation.
|
$ 5,060.05
-
+
| ||
|
1-2 weeks delivery time The Steyr ME0912010 intermediate wiring cable is a 10 m panel cable specified as an intermediate cable for the Solas panel. Supplied as a spare part for Steyr engine installations, it is identified as “Intermediate Cable Panel 10.0 Meter” and is intended only for the Solas panel application.
|
$ 1,655.40
-
+
| ||
|
1-2 weeks delivery time The Steyr ME1003010 intermediate cable assembly is a 12 m panel interconnection cable specified for SOLAS panel installations as a spare part for Steyr engines. It is supplied as an intermediate cable for panel wiring runs where a 12 meter length is required.
|
$ 2,268.44
-
+
| ||