Kobelt manufactures marine controls, known for their durability and precision. Kobelt controls, like the Kobelt gashendel (throttle control), and Kobelt motorbediening (engine control), are integral to the handling and performance of boats, allowing for seamless operation. These products are made with high-quality materials, ensuring long-lasting functionality in the challenging marine environment. Additionally, Kobelt offers a wide range of push-pull controls, electronic control systems, and propulsion control solutions, catering to the diverse needs of the marine and industrial sectors.
|
1-2 weeks delivery time Price incl. 19% VAT These cylinders are made entirely of bronze and stainless steel. They are also available in a balanced and unbalanced configuration. If one cylinder is not enough to provide good steering torque, they can be installed in a dual configuration - one cylinder will serve as a drive (servo-driven). The cylinder is designed for a maximum operating pressure of 1000 lbs. The diameter of the cylinder is 3-1/2, "and the piston rod is 1-1/2" in diameter.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This cylinder is the latest development in design and engineering. It is completely made of non-corrosive materials that are not susceptible to corrosion. Heavy urethane will provide a long life of the central cup. Urethane sealing is the key to long years of work, thanks to its small wear and tear under severe friction. The cylinder can be ordered with the end of the rod with a lock nut.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 7094 cylinder is designed for the owner of the boat, which requires maximum performance and reliability. The castings are all made of manganese bronze. Microhoned steel barrel of special design. The steering rods and piston rods are made of stainless steel. Spherical bearings never require replacement. Piston seals - urethane. By special order, the cylinder can be equipped with metal piston rings.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 7094D cylinder is designed for the owner of the boat, which requires maximum performance and reliability. The castings are all made of silicon bronze. The steel barrel is honed under a microscope. Piston rods and rods are made of stainless steel. The spherical bearings at both ends are very large and never need to be replaced. Piston seals made of urethane material. By special order, the cylinder can be equipped with metal piston rings.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 7096 cylinder is designed for those who value reliability and quality. All castings are made of bronze and manganese. Steel barrel microhoned special device. Steering rods and piston rod are made of stainless steel. The spherical bearings at both ends are very large and will never require replacement. Piston seals - urethane. By special order, the cylinder can be equipped with metal piston rings.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The 7098 cylinder has an 8 "ID from 4 to" stainless steel and a fully chrome piston rod, which is designed for an operating pressure of 2000 psi. Spherical bearings are designed so that they will never break or require replacement. A stop nut is provided to ensure accurate adjustment during installation, which will ensure that the piston reaches the bottom. These cylinders are available in bronze or steel castings. The cylinder tube is made of polished polished steel. Stainless steel connecting rods. Standard seals are easy to replace. The cylinder itself will last you for many years.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The very powerful 7100 cylinder has a 10 "ID from 5 to" stainless steel with a chrome piston rod. It is also available in either bronze or steel. A steel tube with spherical bearings at both ends of the cylinder. Fastening at the back provides a very easy installation, since a pre-drilled base plate will create a tight connection to the plane. The cylinder withstands a load of approximately 300,000 pounds (150 tons).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This valve is intended for use in power steering systems. Its aim is to keep all hydraulic fluid in the steering system itself when the power drive is not working. All hydraulic valves, due to their mechanical incompatibility, lose fluid in various quantities, and this will lead to breakdowns. You will never have a leak with this valve. 7143 will keep all fluids in the system and, even in disrepair.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT 7144 is equipped with a control system to provide speed control. It also provides flow control for the automatic filling system. This small flow control can be adjusted to consume a small amount of oil. The main goal is to ensure ideal control over the steering wheel in one direction or another. Its maximum throughput is six gallons per minute.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The goal of the 7145 is to provide two or three speeds for the steering mechanism. It is important to have more than one steering speed. Suitable for steering systems with autopilot. By applying voltage, one solenoid valve and setting flow control for the appropriate speed - steering becomes very simple. Oil will circulate through both valves at all times, but the maximum capacity should not exceed the level of the needle valve. The maximum throughput from both fully open valves is 12 gallons per minute.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT 7147 steering power tracking system is primarily designed for working boats up to 80 'and pleasure craft up to 120' in length. Updating the manual hydraulic steering system with this device will be easy, since most of the system components are suitable for it, and are already installed on the ship. The helmsman can now easily control the steering wheel with full control. Kobelt's power steering system will handle up to 5,000 feet of torque. 7147 can also be used in twin cylinder installations, adding just one cylinder and two hoses. Made of high quality material -bronza and stainless steel.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Simplicity and durability are important, this device includes all this. Castings are made of bronze with all stainless steel hardware to ensure years of uninterrupted service. This base unit provides the same function on marine vessels on the principle of power steering on a car. Manually turning the steering wheel on large ships, at high speeds, can bring a lot of physical effort. This device, combined with a hydraulic power source, will provide easy control. In case of failure of hydraulic pressure, the switching valve will direct hydraulic fluid from the steering pump directly to the control cylinders.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This device is designed specifically for controlling positioning devices. It can be equipped with 2 microswitches and potentiometers. Microswitches give an on/off signal in either direction, and the potentiometer will provide a stepless control mode in both directions. This device is supplied with a return spring or latch. The potentiometer is available in any 1k or 5k and the entire unit is made of bronze and stainless steel. Its compact design allows the device to be installed in almost any small space.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This device is mainly intended for use in an electronic steering mechanism. It can be used for many other purposes. The device is made of bronze and stainless steel and will provide for many years of uninterrupted service. Calculated to a maximum of 18 inches (450. mm) to achieve optimal performance. Consult our specialist when ordering.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This device is ideal for many marine and industrial applications, such as a nose thruster, steering gear and winch control, as well as monitoring hydraulic tracking devices such as water cannons and throttle control systems. This is a compact device, the components of which are made of bronze and stainless steel - this will provide many years of uninterrupted service. The potentiometer can be installed by the customer or at the plant, upon agreement.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This is a small version of the feedback box. All components are made of bronze and stainless steel construction, available with one of two potentiometers. The second can be ordered separately. Its compact waterproof design will allow it to be installed anywhere. Due to non-aggressive metals, it is intended for seawater. Its goal is to give the position of the steering angle without any effort and ensure the ideal operation of the steering system.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The action of the lever moves the potentiometer and also comes into contact with the brake. The potentiometer can be installed at the plant. Various potentiometers and transfer meters are available to meet the customer's requirements, everything can be done at the factory, when ordering. The device is available either by spring return to the middle position or with a neutral stop system. This device is ideal for many marine and industrial applications, such as a nose thruster, steering gear and winch control, as well as control of hydraulic servo devices and even propulsion and throttle control. All components are made of brass and stainless steel.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This lever is used in hydraulic steering power systems. The operator can maneuver the boat without much effort. The device is controlled by two internal microswitches. Its waterproof bronze and stainless steel design will provide years of uninterrupted operation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Model 7171 is made of bronze and stainless steel, and is suitable for installation anywhere on the ship. Its waterproof design will prevent moisture from entering the unit. This device will provide complete control of the steering system. It is equipped with a stopper in the middle position of the handle. 7171 is available with 2 micro switches (1 on each side), 2 potentiometers.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The main goal of the 7172 is to provide an electronic signal to the hydraulic steering mechanism to correctly position the rudder direction. Usually 7172 is equipped with two potentiometers. 7172 is made entirely of bronze and stainless steel and is designed for long service life and uninterrupted service.
|
Our managers will contact you and clarify the terms of the order
| ||
What are the key features of Kobelt marine controls, and how do they contribute to the precise navigation of marine vessels?
Kobelt marine controls are renowned for their robust and precise design, utilizing state-of-the-art technology to ensure accurate navigation and control of marine vessels. The Kobelt steering system, including the Kobelt 7175 model, integrates seamlessly with other navigation components, allowing for smooth and responsive steering. Key features such as Kobelt gashendel and Kobelt motorbediening offer customizable control options, ensuring compatibility across various types of boats, contributing to their reputation for reliability and precision in the maritime industry.
In addition to steering systems, Kobelt offers a comprehensive range of marine control solutions, including pneumatic controls, push-pull controls, and rugged mechanical push-pull controls, catering to the diverse needs of maritime vessels.
In what types of boats and marine applications are Kobelt Controls most commonly utilized, and why?
Kobelt controls are most commonly utilized in commercial vessels, workboats, and luxury yachts due to their precise control and reliability. Incorporating Kobelt marine controls, such as the Kobelt 7175 model, allows these boats to achieve efficient and responsive navigation. The robust construction of Kobelt parts and the adaptability of systems like Kobelt motorbediening make them suitable for various marine applications, offering versatility and a high level of performance that meets the demanding conditions of maritime environments.
Kobelt controls systems are highly favored in the maritime industry, particularly in commercial vessels, workboats, and luxury yachts, for their exceptional precision and reliability. With Kobelt marine controls like the Kobelt 7175 model, these vessels benefit from smooth and efficient navigation, ensuring optimal performance even in challenging conditions. Kobelt's extensive range of products, including push-pull control systems, hydraulic steering helm pumps, and electronic systems for engine and propulsion, reflects their commitment to providing the widest selection of high-quality marine control solutions.
What types of Kobelt Items do you have in your catalogue?