Bennett trim tab parts are replacement components used to maintain and repair hydraulic and electric trim tab systems on boats. These parts include actuators, trim planes, hinge plates, backing plates, control units, wiring harnesses, hardware packs, and integrated helm controls. Trim tabs help improve ride quality, reduce porpoising, enhance fuel efficiency, and provide smoother handling by adjusting the boat's running attitude and balance while underway.
|
1-2 weeks delivery time The Bennett 7212E24 is a 72"x12" hydraulic trim tab system for boats, supplied as a complete kit with stainless steel trim planes, hydraulic actuators, power unit, tubing, and rocker control. Designed for maximum lift on extremely large and heavily loaded vessels, improving planing performance, correcting listing, and enhancing fuel efficiency. Size: 1829×305 mm. Voltage: 24V.
|
$ 4,121.55
-
+
| ||
|
1-2 weeks delivery time The Bennett AP000A1BC AutoTrim Pro is an all-in-one automatic trim tab control system for BOLT electric tabs, combining auto trim, manual control, and LED position indication in a single keypad.
|
$ 1,743.69
-
+
| ||
|
1-2 weeks delivery time The Bennett AP000A1HA AutoTrim Pro is an automatic trim tab control system for hydraulic setups, combining auto trim, manual control, and LED position indication in one compact keypad.
|
$ 1,743.69
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT1212 is a 12V electric trim tab system with 12x12" (30x30 cm) planes, designed for boats 5.8–7.3 m. Includes two actuators; controls sold separately.
|
$ 1,566.52
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT1212ED is a 12V electric trim tab system with 12x12" (30x30 cm) planes in a corner mount configuration, designed for boats 6.3–7.2 m. Includes two actuators; controls not included.
|
$ 1,604.37
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT124 is a compact 12V electric trim tab system with 12x4" (30x10 cm) planes for boats 4.5–5.8 m. Includes two actuators; controls not included.
|
$ 1,414.99
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT129 is a 12V electric trim tab system with 12x9" (30x23 cm) planes, designed for boats 5.2–6.0 m. Includes two actuators; controls not included.
|
$ 1,466.30
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT1812 is a 12V electric trim tab system with 18x12" (45x30 cm) planes, designed for boats 6.7–8.3 m. Includes two actuators; controls not included.
|
$ 1,667.92
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT189 is a 12V electric trim tab system with 18x9" (45x23 cm) planes, designed for boats 5.8–7.3 m. Includes two actuators; controls not included.
|
$ 1,566.52
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT2412 is a 12V electric trim tab system with 24x12" (60x30 cm) planes, designed for boats 8.4–10.2 m. Includes two actuators; controls not included.
|
$ 1,795
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT249 is a 12V electric trim tab system with 24x9" (60x23 cm) planes, designed for boats 6.7–8.3 m. Includes two actuators; controls not included.
|
$ 1,667.92
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT612ED is a 12V electric trim tab system with 6x12" (15x30 cm) planes in an edge mount configuration, designed for boats 4.5–6.0 m with limited transom height.
|
$ 1,504.19
-
+
| ||
|
1-2 weeks delivery time The Bennett BOLT912ED is a 12V electric trim tab system with 9x12" (23x30 cm) planes in an edge mount configuration, designed for boats 5.1–6.3 m with limited transom height.
|
$ 1,504.19
-
+
| ||
|
1-2 weeks delivery time The Bennett BNEIC5000 is a 12V trim tab indicator control with variable backlighting and automatic tab retraction. Fully sealed unit with compact dimensions 70 × 70 mm, designed for clear visibility and enhanced system safety.
|
$ 1,001.87
-
+
| ||
|
1-2 weeks delivery time The Bennett BNEIC5002 is a 24V trim tab indicator control with variable backlighting and automatic tab retraction. Fully sealed unit with compact dimensions 70 × 70 mm, designed for clear visibility and safe operation.
|
$ 1,001.87
-
+
| ||
|
1-2 weeks delivery time The Bennett M80 is a hydraulic trim tab kit for small boats, featuring 200×250 mm stainless steel tabs. The system delivers up to 30% more lift compared to conventional trim tabs and includes actuators, hydraulic unit, hoses, wiring, and a control panel with toggle switches.
|
$ 1,623.80
-
+
| ||
|
1-2 weeks delivery time The Bennett M120 is a hydraulic trim tab kit for small boats, featuring 250×300 mm stainless steel tabs. The system provides up to 30% more lift than conventional trim tabs and includes actuators, hydraulic unit, hoses, wiring, and a control panel with toggle switches.
|
$ 1,730.72
-
+
| ||
|
1-2 weeks delivery time The Bennett OBI9000E is an all-in-one helm control with LED indicator for BOLT electric trim tab systems, combining control unit, keypad, and position display in a single compact device.
|
$ 1,060.63
-
+
| ||
|
1-2 weeks delivery time The Bennett OBI9000H is an all-in-one hydraulic trim tab helm control with built-in indicator, featuring LED position display, auto tab retraction, and compact single-unit installation.
|
$ 1,060.63
-
+
| ||
|
1-2 weeks delivery time The Bennett RM12 is a relay module designed to protect trim tab control systems from damage caused by simultaneous button activation. It reduces voltage drop in long wiring installations and prevents fuse failure, ensuring safe and reliable system operation.
|
$ 245.55
-
+
| ||
What is the function of trim tabs and how do electric trim tab systems improve boat performance?
Trim tabs are adjustable control surfaces mounted on the transom that help optimize a boat’s running angle, improve stability, and enhance overall performance. Bennett marine trim tab systems reduce bow rise, minimize listing, improve fuel efficiency, and provide a smoother ride in changing sea conditions.
Modern Bennett marine trim tab systems use actuators, controls, and trim tab hardware working together to deliver precise adjustment and reliable operation. Regular maintenance and timely replacement of worn components help preserve system reliability and ensure consistent performance from this essential piece of marine equipment.
How do dual actuator systems enhance the performance and control of a hydraulic trim tab system on larger boats?
Dual actuator systems provide greater lifting force and more balanced trim tab movement, making them particularly effective on larger boats that require precise attitude control. As an advanced trim tab product, this configuration distributes loads across two actuators, improving responsiveness, reducing stress on individual components, and enhancing overall handling in varying sea conditions.
This dual actuator design is an important trim tab innovation that contributes to smoother operation, improved reliability, and better long-term performance. When maintenance is required, using OEM-grade replacement parts helps preserve the effectiveness of the system and maintain consistent control characteristics.
What role does a hinge plate play in the movement and support of a trim plane?
A hinge plate serves as the pivot point between the trim plane and the transom, allowing the trim tab to move smoothly while supporting operational loads. It helps maintain proper alignment of the trim plane and distributes forces generated during adjustment and boat operation.
As one of the key trim tab replacement parts, a properly functioning hinge plate contributes to system reliability and responsive trim control. If excessive wear or corrosion is present, it may be necessary to replace the component to restore optimal performance and support of this essential trim tab accessory.