Bennett trim tab parts are replacement components used to maintain and repair hydraulic and electric trim tab systems on boats. These parts include actuators, trim planes, hinge plates, backing plates, control units, wiring harnesses, hardware packs, and integrated helm controls. Trim tabs help improve ride quality, reduce porpoising, enhance fuel efficiency, and provide smoother handling by adjusting the boat's running attitude and balance while underway.
|
1-2 weeks delivery time The Bennett A1115 is a stainless steel lower hinge pin for trim tab actuator cylinders, compatible with A1113 and A1113RC hinge assemblies. Ensures secure connection and proper actuator movement.
|
$ 3.72
-
+
| ||
|
1-2 weeks delivery time The Bennett A1200S is a hydraulic actuator cylinder for trim tab systems, with a total length of 290 mm and stroke of 58 mm. Made from corrosion-resistant plastic with integrated oil passages for reliable marine operation.
|
$ 253.56
-
+
| ||
|
Bennett A1200SRC – Hydraulic Short Actuator for M80/M120 Trim Tabs (2.5" Stroke, w/ Rivet Clearance)
1-2 weeks delivery time The Bennett A1200SRC is a hydraulic short actuator designed for M80 and M120 trim tab systems, featuring a 2.5" (63.5 mm) stroke and rivet clearance design. It provides reliable and maintenance-free operation, ensuring precise trim tab movement and long-lasting performance.
|
$ 213.84
-
+
| ||
|
1-2 weeks delivery time The Bennett AR512 is a 12V auto tab retractor for trim tab systems, automatically returning tabs to the fully retracted position when ignition is turned off. Designed to protect actuators and stainless steel shafts during trailering and storage.
|
$ 246.29
-
+
| ||
|
1-2 weeks delivery time The Bennett BAW2005 is a 1.5 m (5 ft) actuator extension cable for BOLT electric trim tab systems, designed to extend the wire harness between actuators and control units.
|
$ 84.68
-
+
| ||
|
1-2 weeks delivery time The Bennett BAW2010 is a 3.0 m (10 ft) actuator extension cable for BOLT electric trim tab systems, designed for extended installations and longer actuator wiring runs.
|
$ 99.85
-
+
| ||
|
1-2 weeks delivery time The Bennett BAW2015 is a 4.5 m (15 ft) actuator extension cable for BOLT electric trim tab systems, designed for extended installations and modular wiring configurations.
|
$ 112.48
-
+
| ||
|
1-2 weeks delivery time The Bennett BAW2020 is a 6.0 m (20 ft) actuator extension cable for BOLT electric trim tab systems, designed for long-distance installations and extended wiring setups.
|
$ 124.64
-
+
| ||
|
1-2 weeks delivery time The Bennett BCN6500 is a 12V control box for BOLT electric trim tab systems, designed to operate with the BCN6700 keypad and provide automatic tab retraction and reliable system control.
|
$ 327.47
-
+
| ||
|
1-2 weeks delivery time The Bennett BEA2000 is a 12V electric actuator for BOLT trim tab systems with a 2.5" stroke and fixed upper hinge, designed for reliable marine performance.
|
$ 606.08
-
+
| ||
|
1-2 weeks delivery time The Bennett BEA2100 is an upper hinge spacer designed for use with all Bennett BOLT electric actuators. It ensures correct actuator positioning and alignment during installation, supporting reliable operation and long-term performance. Compatible with BOLT actuator systems, this spacer is used as part of the upper hinge assembly to achieve a secure and stable fit.
|
$ 34.09
-
+
| ||
|
1-2 weeks delivery time The Bennett BEA3000 is a 12V electric trim tab actuator featuring an adjustable upper hinge, designed for BOLT systems. Constructed from durable black nylon, it is fully waterproof, submersible, and maintenance-free. The actuator includes a 6 ft (approx. 1.8 m) wire harness with waterproof connectors and operates with a 2.5" stroke, ensuring reliable performance and easy installation in marine environments.
|
$ 606.08
-
+
| ||
|
1-2 weeks delivery time The Bennett BHW4003 is a 0.9 m (3 ft) extension cable for BOLT electric trim tab helm controls, designed to extend wiring length and simplify installation routing.
|
$ 122.20
-
+
| ||
|
1-2 weeks delivery time The Bennett BHW4005 is a 1.5 m (5 ft) extension cable for BOLT electric trim tab helm controls, providing additional length for flexible installation and cable routing.
|
$ 124.64
-
+
| ||
|
1-2 weeks delivery time The Bennett BHW4007 is a 2.1 m (7 ft) extension cable for BOLT electric trim tab helm controls, designed to extend wiring distance and support flexible installation layouts.
|
$ 124.64
-
+
| ||
|
1-2 weeks delivery time The Bennett BHW4010 is a 3.0 m (10 ft) extension cable for BOLT electric trim tab helm controls, designed for longer installations and extended cable routing.
|
$ 138.07
-
+
| ||
|
1-2 weeks delivery time The Bennett CC3003-P is an upper hinge with integrated coil designed for the port side of Bennett trim tab actuator systems. It ensures stable actuator pivot movement and reliable operation, featuring a durable construction and gray finish for proper identification and installation on the port side.
|
$ 111.25
-
+
| ||
|
1-2 weeks delivery time The Bennett CC3003-P is an actuator upper hinge with integrated position sensor for port-side trim tab systems. Includes a 6 m cable for connection to trim tab indicators. Designed for accurate tab position monitoring.
|
$ 143.09
-
+
| ||
|
1-2 weeks delivery time The Bennett H1170A is a hydraulic trim tab hardware pack including mounting brackets, fasteners, pins, and fittings for installation and maintenance of Bennett trim tab systems. Designed for durability and reliable marine use.
|
$ 79.39
-
+
| ||
|
1-2 weeks delivery time The Bennett H1170B is a dual actuator hardware pack for trim tab systems, designed for installation and connection of two hydraulic cylinders. Includes all required fittings for reliable setup and operation.
|
$ 79.39
-
+
| ||
What is the function of trim tabs and how do electric trim tab systems improve boat performance?
Trim tabs are adjustable control surfaces mounted on the transom that help optimize a boat’s running angle, improve stability, and enhance overall performance. Bennett marine trim tab systems reduce bow rise, minimize listing, improve fuel efficiency, and provide a smoother ride in changing sea conditions.
Modern Bennett marine trim tab systems use actuators, controls, and trim tab hardware working together to deliver precise adjustment and reliable operation. Regular maintenance and timely replacement of worn components help preserve system reliability and ensure consistent performance from this essential piece of marine equipment.
How do dual actuator systems enhance the performance and control of a hydraulic trim tab system on larger boats?
Dual actuator systems provide greater lifting force and more balanced trim tab movement, making them particularly effective on larger boats that require precise attitude control. As an advanced trim tab product, this configuration distributes loads across two actuators, improving responsiveness, reducing stress on individual components, and enhancing overall handling in varying sea conditions.
This dual actuator design is an important trim tab innovation that contributes to smoother operation, improved reliability, and better long-term performance. When maintenance is required, using OEM-grade replacement parts helps preserve the effectiveness of the system and maintain consistent control characteristics.
What role does a hinge plate play in the movement and support of a trim plane?
A hinge plate serves as the pivot point between the trim plane and the transom, allowing the trim tab to move smoothly while supporting operational loads. It helps maintain proper alignment of the trim plane and distributes forces generated during adjustment and boat operation.
As one of the key trim tab replacement parts, a properly functioning hinge plate contributes to system reliability and responsive trim control. If excessive wear or corrosion is present, it may be necessary to replace the component to restore optimal performance and support of this essential trim tab accessory.