Sea Recovery A14C1400-2 - Aquamatic Compact

Sea Recovery A14C1400-2 - Aquamatic Compact

With one touch, the Aqua Matic will produce water from start to finish, allowing boaters more time to relax and enjoy the cruise. Equipped with an automated pressure regulating system and fresh water flush, the Aqua Matic can fully operate and perform self maintenance functions without the need for an operator. The automated pressure regulating system balances pressure levels automatically based on any water condition, allowing boaters to avoid the time consuming duty of manually adjusting the pressure. Capable of producing 1,400 GPD (5,300 LPD).

The new Aqua Matic is NMEA 2000 compliant, giving boaters the power to monitor and communicate with the system through any NMEA compatible display. (Check with display manufacturer for compatibility). Functions and controls are available anywhere throughout the NMEA 2000 network, and are quickly configured with a single touch of the menu. Boaters can even start up and shut down your system from your remote display. The simple-to-use touch screen displays pictorial images of all operating conditions. The digital and bar graph readout of all system conditions; available in U.S. standard, metric, and multiple languages. The High Pressure Pump runs smooth and is free of pulsations, creating quiet performance.

Shipped from the factory ready to install and function, with no optional items required. Includes a complete installation kit and a comprehensive and detailed Owner's Operation and Maintenance Manual.

Technical Specifications:

• Brand: Sea Recovery
• Number of Membranes: 2
• Application: Leisure Marine
• Configuration: Compact
• Product Type: Watermaker
• Performance: +-15% at 820 PSI / 57 BAR, 77°F / 25°C & 35,000 PPM TDS typical sea water
• Water Flow Rate: 1,400 Gal/day, 5,300 L/day
• Pump Type: Exclusive high efficiency Booster Pump;Optional Patented High Pressure Quintiplex Radial Axial Plunger Pump is water lubricated, does not require oil changes and operates 8,000 hours between required maintenance Radial Axial Plunger Pump is water lubricated, does not require oil changes and operates 8,000 hours between required maintenance
• Reverse Osmosis Membrane Type: Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element
• Filter Type: Sea Strainer with a cleanable Monel Mesh Screen filter, Charcoal Filter Assembly, Commercial Prefilter, and Oil Water Separator
• Power Source: AC
• Pressure Adjustment Control Type: Automatic
• Minimum Inlet Pressure Rating: 1/2" MNPT (Male National Pipe Thread, Amer. Std)
• Salt Rejection: 99.2, Average 99.4 %
• Salinity Monitoring: Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design.
• Salinity Range: Designed for seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)
• Water Feed Temperature Range: Max. 122°F / 50°C, Min. 33°F / .5°C
• Output Water Temperature Range: Ambient to feed water temperature
• Feed Water Flow Rate: 4.5 gpm / 17 lpm (depending on system)
• Chlorine Tolerance: 0.1 ppm
• pH Range: 3-11 (typical seawater pH is 8)
• Pressure Rating: Feed Water: Maximum 35 psi / 2.41 bar / 2.46 Kg/cm2
• Operation Type: Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2
• Water Production (GPD): 1,400
• Weight: 171 lbs / 76 Kg
• Height: 17" / 421 mm
• Width: 18" / 457 mm
• Length: 37 15/16" / 964 mm
• External Water Installation Connection Type: See Brochure Under Product Support
• Electrical Requirements: See Brochure Under Product Support
• Configuration: Compact