Kicker Marine 5 Channel Amplifier KA48KXMA9005 900W Class D System Amplifier

Kicker Marine Amplifier KA48KXMA9005 - KXM 900W 5 Channel Class D System Amplifier

The KICKER® KXMA five-channel marine amp delivers power and performance with a full-system solution in a single, powerful amplifier.

The KICKER Real Marine standard ensures that your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp includes anti-corrosive speaker, power, and RCA terminals, stainless-steel screws, conformal-coated circuit boards, and ABYC/NMMA-compliant power connections. Rigorously tested to meet or exceed marine industry standards for UV, humidity, and saltwater exposure, our commitment to engineering quality and maritime safety makes our products truly "Real Marine."

Gain, crossover, and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ™ delivers up to 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, allowing you to quickly tune your system to perfection. A full-range RCA output makes it easy to add another amplifier without running new signal cable to your KICKER KMC Media Center.

A wired bass controller is included for on-the-fly adjustments to your subwoofer channel levels without leaving your seat.

• Class D Amplifier
• Gain Control With "Gain Match" LED Indicator
• FIT2™ (Fail-safe Integration Technology) Circuitry
• Variable 24dB Crossover
• DSP-Controlled Preamp
• KickEQ™ 6dB Variable Bass Boost
• ABYC/NMMA-Compliant Power Terminals
• Conformal-Coated Circuit Boards
• Easy Access to Settings behind Gasket-Sealed Cover Panel
• Black Anodized Aluminum Chassis
• Top-Mounted, Teal LED Light Pipe
• Stainless-Steel Mounting Hardware Included

This KXMA amplifier delivers up to 125 watts into four full-range channels or 250 watts into two sets of bridged channels. The separate subwoofer channel can deliver up to 400 watts.

Specification:

• RMS Power (Main Channels)
• 14.4V 4 Ohm = 1% THD+N: 100 W x 4
• 14.4V 2 Ohm = 1% THD+N: 125 W x 4
• 14.4V 4 Ohm bridged = 1% THD+N: 250 W x 2
• RMS Power (Subwoofer Channel)
• 14.4V 4 Ohm = 1.5% THD+N: 200 x 1
• 14.4V 2 Ohm = 1.5% THD+N: 400 x 1
• 14.4V 1 Ohm = 1.5% THD+N: 400 x 1
• Length: 12 3/4" (32.4 cm)
• Height: 2 1/8" (5.5 cm)
• Width: 8 5/16" (21 cm)
• Frequency Response (Main): 10-20K Hz (+/- 1 dB)
• Frequency Response (Sub): 10-160Hz (+/- 1 dB)
• Signal-to-Noise Ratio: >95dB A-weighted, re: rated power
• Input Sensitivity: 250mV-10V
• Crossover: Selectable Electronic
• KickEQ Boost: variable to 0-6dB, centered at 40Hz