Whisper Power 60110027 - MG 12/12-30A-i DC/DC CONVERTER, Galvanic Isolated

Whisper Power 60110027 - MG 12/12-30A-i DC/DC Converter

The Whisper Power MG 12/12-30A-i DC/DC Converter is expertly designed to provide a stable 12 VDC output, ensuring that your electronic equipment is protected from voltage fluctuations caused by battery spikes or drops. This galvanically isolated converter enhances stability with its separated power circuits, making it an excellent choice for applications that require a dependable voltage supply.

Key Features

• Voltage stabilization to maintain a consistent output voltage
• Galvanic isolation for added safety and stability
• Premium quality industrial design for high reliability and longer life cycle
• Silent operation with no humming, utilizing only temperature-controlled fans for cooling
• No interference with radios, VHF, or other sensitive equipment
• Compact, fast, and plug-and-play installation for easy setup
• Can be run in parallel for supporting high-demand appliances

Dimensions & Weight

Length: 83 mm (3.3 in) | Width: 186 mm (7.3 in) | Height: 133 mm (5.2 in)

Weight: 1.4 kg (3.1 lb)

Technical Specifications

Converter Type: Voltage stabilization

Input

Nominal Input Voltage: 12 VDC

Input Range (Specifications Met): 9 .. 18 VDC

Input Range (No Defects): 0 .. 18 VDC

Output

Nominal Output Voltage: 12.5 VDC

Voltage Adjustable: Yes

Output Accuracy: 3%

Ripple (Peak Output Voltage): 1%

Maximum Power Output: 490 W

Continuous Output Power: 420 W

Maximum Output Current: 30 A

Continuous Output Current at 40 °C: Up to 30 A

General Specifications

Efficiency: >87%

Consumption No Load: < 25 mA

Ambient Operating Temperature: -10°C to +40°C

Storage Temperature: -25° to +85°C

Relative Humidity in Use: Up to 95%, non-condensing

Galvanic Isolation: Yes, 500 Vac

Cooling: Mechanical

Protections

Current / Short Circuit: Restricted by current rating

Overheating Shutdown: Power restricted by temperature

Mechanical Specifications

Faston In/Out: Max thread thickness 6 mm²

Mounting Holes: Diameter 4 mm, rh 91 x 177

International Protection Rating: IP20

Housing: Frame 8, Anodized aluminium with ABS end caps

Housing Colour: RAL 9006 blank aluminium

Meets the Following Standards: EN61000-6-3, EN61000-6-2, LVD 2006/95/EC, Automotive EMC 2004/104/EC, RoHS 2011/65/EU

Note: The above specifications are subject to change without prior notice.