Westerbeke 26.0 kW EDT Digital single-phase generator

The Westerbeke 26.0 kW EDT generator represents significant advances in compactness, low noise and reliability. Westerlink allows the Westerbeke generator and multiple Westerbeke displays to exchange information via just one data cable. This can result in significant cost savings as numerous cables or harnesses are eliminated. Local control post - Start/Stop panel installed on the generator. Emergency protection: speeding, reduced speed, low oil pressure, high exhaust and coolant temperature. LEDs visually show the status of oil pressure, coolant and exhaust temperature, battery voltage, voltage and frequency of the generator. The LCD screen displays the exact values ​ ​ of the engine speed, oil pressure, coolant temperature, battery voltage and generator, engine engine hours.

• Splash-proof digital display and diagnostic panel for remote control room
• Local control station - Start/Stop panel installed on the generator
• Electronic Management
• Emergency protection: speeding, reduced speed, low oil pressure, high exhaust and coolant temperature
• Circuit Breaker
• Battery Charging Generator
• Power take-off unit
• Self-emptying fuel system in most models
• Internal water cooling circuit
• Water is injected into the exhaust (wet exhaust)
• Seawater Pump
• Anti-vibration shock absorbers
• Drain hose and oil tray
• SPTA User Guide and Specification
• International Limited Warranty 12 months to 5 years for individual engine parts
• Current EPA compliance
• NMEA 2000 Certified Data Components
• Optional digital display (s)
• Additional Start/Stop Start-Stop Panel
• Installed SST Sound Shield
• 24 V electrical system (more than 5.7 kW)
• Non-grounded 12 V electrical system (more than 5.0 kW)
• Unground 24 V electrical system (more than 5.7 kW)
• Keel cooling
• Set of adapters for power take-off mechanism (up to 12 kW)
• Power take-off mechanism with electric coupling (more than 12.0 kW)
• Fuel/water separator
• Wet exhaust silencer
• Spare Parts Kits: Onboard Kit Type A, Extended Kit Type B
• Stainless steel 1 "antisyphon valve
• Onshore Power Switch
• Technical Manual

Features:
• Generator power, kW 26.0
• Phase 1/3
• Single-phase generator current, A 99.9
• Engine power, hp 48.0
• Number of cylinders 4
• Working volume, L 3.30
• Cylinder diameter/stroke, mm 98.0/110.0
• 23:1 compression ratio
• RPM 1500
• Atmospheric air supply system
• Dual circuit cooling system
• Max. long inclination angle, degrees 20
• Fuel consumption at 100% load, l/h 8.9
• Electronic speed controller type
• Fuel filter
• full-flow,
• plug-in
• Fuel line, inlet and outlet (min/max), mm 6.35/9.53
• Exhaust hose diameter, mm 76.2
• Top/side oil neck arrangement
• Starter starting current, A 400-600
• Voltage stability (0 to 100% load), +/-% 2
• Frequency stability (0 to 100% load), +/-% 0.3 (0.5)
• Charging current of the hinged generator, A 60
• Controls
• 2 control posts:
• local control post - Start/Stop panel,
• Remote Control Room - Digital Display
• Dry weight without SST casing, kg 516

Westerbeke generator types:

kW/kVa	RPM	cil.	Mm Size	Ves kg
5,7	1500	3	846x536x566	220
7,5	1500	3	917x589x643	277
9,2	1500	3	917x589x643	277
12,0	1500	4	1003x589x643	310
13,5	1500	3	1041x660x686	411
17,0	1500	4	1143x660x686	430
23,5	1500	4	1288x691x782	584
26,0	1500	4	1288x691x782	584