Victron Energy PMP122300001 - MultiPlus 12/3000/120-16 230V VE.Bus

Victron Energy MultiPlus 12/3000/120-16 230V VE.Bus Inverter/Charger

Key Features:

• Two AC Outputs: The primary output provides uninterruptible power with a rapid switchover time of less than 20 milliseconds, ideal for sensitive electronics. The second output is active only when AC input is available, allowing selective load control to prevent battery discharge.
• PowerControl and PowerAssist Technology: Automatically adjusts to generator or shore power limitations by prioritizing other loads and boosting power from the battery when needed, thus expanding generator or shore power capacity during peak demand.
• High Parallel and Three-Phase Capability: Supports up to six units in parallel, reaching up to 75 kW (90 kVA) and over 2000 A charging capacity. Can be configured for three-phase output or up to six sets of three units for large-scale applications.
• Solar-Ready with Advanced Grid Detection: Efficiently integrates with off-grid or grid-connected PV systems and MPPT Solar Chargers, ensuring reliable AC power availability during grid failures.
• Remote Monitoring and Control Options: Compatible with Victron Color Control GX, Bluetooth-enabled devices, and the VRM Portal, allowing for detailed monitoring and configuration from anywhere.

Specifications:

• Input Voltage Range (DC): 9.5 – 17 V
• Output Voltage (AC): 230 V ± 2%
• Output Frequency: 50 Hz ± 0.1% (adjustable to 60 Hz)
• Continuous Output Power at 25°C: 3000 VA / 2400 W
• Continuous Output Power at 40°C: 2200 W
• Continuous Output Power at 65°C: 1700 W
• Peak Power: 6000 W
• Maximum Efficiency: 93%
• Zero Load Power Consumption: 9 W (AES mode: 7 W, Search mode: 3 W)
• Charger AC Input Voltage Range: 187-265 VAC
• AC Input Frequency Range: 45 – 65 Hz
• Charge Voltage 'Absorption': 14.4 V DC
• Charge Voltage 'Float': 13.8 V DC
• Charge Voltage 'Storage Mode': 13.2 V DC
• Maximum Charge Current: 120 A
• Battery Temperature Sensor: Yes
• Operating Temperature Range: -40°C to +65°C (fan-assisted cooling)
• Protection Features: Short circuit, overload, high/low battery voltage, high input ripple, and overheating protection
• VE.Bus Communication Port: Supports parallel, three-phase operation, remote monitoring, and system integration
• Dimensions (HxWxD): 362 x 258 x 218 mm
• Weight: 10 kg
• Enclosure Material & Color: Aluminum, blue (RAL 5012)
• IP Rating: IP21
• Standards Compliance: EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 for safety; EN 55014-1, EN 55014-2, EN-IEC 61000-3-2 for emissions

Compatibility and Application:

• Ideal for off-grid, marine, RV, and industrial applications where stable inverter and charger performance is crucial.
• Seamlessly integrates with PV systems, MPPT Solar Chargers, and grid-tied configurations, supporting self-consumption setups and backup power solutions.
• Compatible with VRM Portal for remote management, and integrates with NMEA 2000 networks for marine electronics.

Benefits:

• Ensures uninterrupted power with a fast switchover, protecting sensitive equipment and providing stability for essential applications.
• Reduces reliance on shore or generator power with PowerAssist, lowering fuel costs and wear on auxiliary power sources.
• Flexible system expansion options allow for future growth, supporting high-power applications and scalable setups for commercial, industrial, or residential use.
• Remote monitoring and control enhances operational efficiency, allowing full configuration access from any location.
• Reliable, corrosion-resistant aluminum casing with IP21 rating, suitable for challenging environments, and maintaining durability under high humidity and marine conditions.
• Energy-efficient design minimizes idle power consumption, reducing operational costs and enhancing sustainability for long-term use.