The Victron Energy Catalogue presents a comprehensive overview of power and energy solutions used on boats, RVs, and off-grid systems. It covers solar charge controllers with maximum power point tracking, DC to DC converters, battery monitoring, power conversion, and system communication via smart control interfaces. These solutions are applied to manage solar energy, battery performance, and onboard power distribution with high quality, reliability, and performance across modern marine and mobile energy systems.
|
1-2 weeks delivery time The Victron ArgoFET 100-2 is a high-efficiency dual battery isolator using FET technology to eliminate voltage drop during charge distribution. With a 100A current rating and support for both 12V and 24V systems, it enables safe, simultaneous charging of two battery banks from a single alternator or battery charger. It includes a current-limited alternator energize input and comes in a rugged 65 x 120 x 200 mm housing with M8 bolt terminals.
|
$ 140.69
-
+
| ||
|
1-2 weeks delivery time The Victron ArgoFET 100-3 is a FET-based battery isolator for high-efficiency charging of three independent battery banks from a single alternator. Unlike diode isolators, it offers virtually zero voltage loss (<0.02V at low current), and includes a current-limited alternator energize input for full alternator compatibility. Designed for 12/24V systems with up to 100A current capacity, its compact 65 x 120 x 200 mm enclosure and M8 terminals ensure reliable power distribution in marine, vehicle, and off-grid systems.
|
$ 161.73
-
+
| ||
|
1-2 weeks delivery time The Victron ArgoFET 200-2 is a high-capacity, dual-output battery isolator that uses ultra-low-loss FET technology for maximum charging efficiency. Supporting 200 amps of charge current at 12V or 24V, this unit eliminates the voltage drop associated with diode-based isolators, making it ideal for sensitive battery systems. It features M8 bolt connections, a current-limited alternator energize input, and a rugged 65 x 120 x 200 mm chassis for demanding marine, off-grid, and vehicle applications.
|
$ 168.30
-
+
| ||
|
1-2 weeks delivery time The Victron ArgoFET 200-3 is the highest-capacity model in the ArgoFET series, enabling simultaneous, lossless charging of up to three batteries from a single alternator or charger. With support for 200A charging currents at 12/24V, it uses field-effect transistors to eliminate voltage drop and includes an alternator energize input for full compatibility. The device’s rugged 65 x 120 x 200 mm aluminum body and M8 bolt terminals ensure reliable operation in high-demand power systems.
|
$ 197.23
-
+
| ||
|
1-2 weeks delivery time The Victron Cyrix-ct 12/24V-120A (CYR010120011R) is a fully automatic, microprocessor-controlled battery combiner relay for 12V or 24V DC systems. It engages when charging is detected and disconnects when discharge begins, ensuring priority charging of the starter battery. With intelligent trend detection, bidirectional voltage sensing, Start Assist function, and no voltage loss, it is an ideal diode-isolator alternative for marine, automotive, or RV dual-battery systems.
|
$ 68.37
-
+
| ||
|
1-2 weeks delivery time The Victron Cyrix-ct 12/24V-120A (CYR010120110R) Battery Combiner Kit enables safe and efficient addition of a second or third battery to a 12V or 24V DC system. This intelligent voltage-sensitive relay charges all batteries via the alternator or charger while isolating the starter battery when charging stops. It includes cables, lugs, and features emergency start and IP54 protection—ideal for marine, automotive, or RV use.
|
$ 136.74
-
+
| ||
|
1-2 weeks delivery time The Victron Cyrix-ct 12/24V-230A (CYR010230010R) is a heavy-duty microprocessor-controlled battery combiner designed for high-power DC systems. It automatically connects batteries in parallel when charging is detected and disconnects during discharge, with no voltage loss. Featuring bidirectional sensing, LED status indication, a control cable, and emergency Start Assist function, it ensures reliable power distribution in marine, RV, and off-grid installations.
|
$ 169.61
-
+
| ||
|
1-2 weeks delivery time The Victron Cyrix-i 12/24V-400A (CYR010400000) is a heavy-duty, microprocessor-controlled battery combiner designed for professional high-current DC systems. It features intelligent voltage trend sensing, automatic 12V/24V system detection, and selectable switching profiles. With 400A continuous and 2000A peak capacity, bidirectional sensing, start-assist function, and LED indicators, it is ideal for marine, industrial, and off-grid energy setups where no voltage loss and battery protection are critical.
|
$ 361.59
-
+
| ||
|
1-2 weeks delivery time The Victron Cyrix-i 24/48V-400A (CYR020400000) is a heavy-duty intelligent battery combiner relay for high-power 24V and 48V systems. It connects batteries in parallel when charging is detected and disconnects during discharge—without any voltage loss. Features include bidirectional sensing, programmable switching profiles, Start Assist function, and LED status indication. Designed for industrial, marine, or off-grid energy setups requiring precise and automated DC battery management.
|
$ 361.59
-
+
| ||
|
1-2 weeks delivery time The Victron BCD 402 is a 2-battery diode-based battery combiner designed for mission-critical DC systems. Rated for up to 40 A, it ensures uninterrupted power delivery by allowing two power sources to supply a single load in parallel. Utilizing Schottky diodes for minimal voltage drop (0.3–0.45 V), this unit is ideal for engine controls, navigation systems, and other essential electronics. It supports both 12V and 24V systems and features M6 bolt terminals in a 60 x 120 x 75 mm housing.
|
$ 51.27
-
+
| ||
|
1-2 weeks delivery time The Victron BCD 802 is a robust dual-input diode battery combiner engineered for critical DC systems that require guaranteed power delivery. It allows two power sources to operate in parallel, supplying up to 80A to the load while isolating the sources from each other. Thanks to high-efficiency Schottky diodes, voltage drop is minimized (0.3–0.45 V), making it ideal for redundant power applications in 12V or 24V systems. The unit features compact dimensions and M6 bolt terminals.
|
$ 63.12
-
+
| ||
|
1-2 weeks delivery time The Victron Battery Balancer (BBA000100100) is designed to equalize the charge levels between two 12V batteries in a 24V system or multiple series strings in 48V setups. It activates at 27V, drawing up to 1A from the most charged battery to rebalance the system. For 48V banks, three balancers can be connected in parallel. Compact and passive, this solution helps extend battery life in off-grid, marine, and industrial applications.
|
$ 68.37
-
+
| ||
|
1-2 weeks delivery time The Victron BatteryProtect BP-65 automatically disconnects loads from a 12V or 24V battery when voltage drops to critical levels, protecting batteries from excessive discharge or engine starting failure. Supporting up to 65A continuous load, it features programmable voltage thresholds, delay timers, over-voltage protection, and compatibility with Li-ion batteries and VE.Bus BMS systems. Its compact 40 x 48 x 106 mm IP67-rated enclosure makes it ideal for automotive, marine, and off-grid power applications.
|
$ 51.27
-
+
| ||
|
1-2 weeks delivery time The Victron BatteryProtect BP-100 disconnects non-critical loads from a 12V or 24V battery to prevent deep discharge and protect system integrity. Capable of handling 100A continuous current, it supports programmable disconnect/reconnect thresholds, over-voltage protection, Li-ion battery compatibility, and VE.Bus BMS control. The MOSFET-based design ensures ultra-low current consumption and ignition-proof switching. The unit is housed in a rugged 59 x 42 x 115 mm case with M8 terminals.
|
$ 74.94
-
+
| ||
|
1-2 weeks delivery time The Victron BatteryProtect BP-220 is a heavy-duty load disconnect unit that automatically protects 12V or 24V batteries from excessive discharge or over-voltage. It supports up to 220A continuous load and includes programmable voltage thresholds, delayed disconnect/reconnect timers, over-voltage protection, and VE.Bus BMS compatibility. Featuring MOSFET-based ignition-proof switching and ultra-low power consumption, this unit is ideal for demanding marine, vehicle, and solar systems.
|
$ 123.59
-
+
| ||
|
1-2 weeks delivery time The Victron BatteryProtect BP-48-100 disconnects non-critical DC loads in 48V systems to prevent battery damage from deep discharge or over-voltage. With a 100A continuous current rating and 250A surge handling, it offers programmable thresholds, delay timers, and compatibility with VE.Bus BMS. Built with solid-state MOSFET technology for silent, spark-free operation, it ensures safe operation in critical off-grid, telecom, and industrial applications.
|
$ 168.30
-
+
| ||
|
1-2 weeks delivery time critical loads from your 12V or 24V battery before over-discharge or over-voltage can cause damage. Rated for 65A continuous load, it features Bluetooth programming, MOSFET switching for silent operation, and full compatibility with VE.Bus BMS and Li-ion battery systems. Setup is easy via VictronConnect, and the device includes programmable thresholds, time delays, and an instant system overview from your phone.
|
$ 76.26
-
+
| ||
|
1-2 weeks delivery time The Victron Smart BatteryProtect BP-100 is a powerful DC load disconnect unit designed for intelligent battery management. Supporting up to 100A continuous current in 12V or 24V systems, it offers full Bluetooth configuration, programmable disconnect thresholds, over-voltage protection, and compatibility with Li-ion batteries and VE.Bus BMS. The solid-state MOSFET design ensures silent, spark-free switching. VictronConnect allows instant readout and diagnostics via smartphone or tablet.
|
$ 99.93
-
+
| ||
|
1-2 weeks delivery time The Victron Smart BatteryProtect BP-220 is a high-power, Bluetooth-enabled solid-state disconnect unit that supports up to 220A continuous load. It prevents battery over-discharge and protects sensitive equipment from voltage spikes in 12V or 24V DC systems. Bluetooth configuration via the VictronConnect app allows full programming of disconnect/reconnect thresholds, while compatibility with VE.Bus BMS ensures seamless integration with Li-ion systems. Built with MOSFET technology, it ensures silent, spark-free switching in demanding environments.
|
$ 148.58
-
+
| ||
|
1-2 weeks delivery time The Victron Smart BatteryProtect BP-48-100 protects 48V battery systems from excessive discharge and over-voltage damage by disconnecting non-critical loads. With a 100A continuous load rating and Bluetooth configurability via VictronConnect, it allows full control over disconnect/reconnect thresholds and system behavior. This unit features delayed switching, MOSFET-based ignition-proof design, and full VE.Bus BMS compatibility — all within a compact, high-resilience IP67-rated enclosure.
|
$ 193.28
-
+
| ||
What is a solar charge controller in Victron Energy systems and how does it manage solar charge from solar panels in 12V and 48V energy systems?
A solar charge controller in Victron Energy systems manages mppt solar charge by continuously optimizing voltage and current from solar panels to protect and efficiently charge a smart battery in both 12V and 48V power solutions. Using smartsolar mppt technology, integrated monitoring via ve.can, and support from components such as lynx power, dc-dc converter, battery monitor, and voltage and temperature sensor, it ensures stable performance, quality and performance, and reliable energy management across modern marine and off-grid applications.
As part of Victron Energy products, these solar controllers work within a wide range of products designed by a leading manufacturer of power solutions founded in 1975. Combined with systems such as orion dc-dc solutions, lynx distributor and lynx shunt ve.can, bluesolar mppt and smartsolar mppt tr ve.can solar technologies, and monitoring tools like the bmv-712 smart battery monitor and cerbo gx, they form high-quality solar and energy management systems focused on reliability, quality products, and efficient victron energy power delivery.
What role does an MPPT solar charge controller play in managing solar charge efficiently in the Victron Energy Catalogue?
MPPT solar charge controller plays a key role by optimizing solar charge input to achieve maximum energy yield, even under changing light conditions, setting a new standard in the solar industry. It works alongside inverter chargers, battery monitor solutions, and components such as lynx shunt, smartshunt, battery balancer, and isolated dc-dc converter to deliver high-quality solar power, stable 120v output, and efficient energy management across modern power solutions.
How do inverter charger supports reliable power supply for sensitive onboard equipment?
An inverter charger supports reliable power supply by converting battery energy into clean, stable AC output such as 2 x 120v, protecting sensitive equipment from voltage fluctuations and load spikes. Working together with solar inverters, MPPT solar charge control, battery monitor systems, and components like a shunt and distributor, it ensures continuous blue power, controlled current up to 50 amp, and consistent performance for navigation, communication, and control electronics.
How does the Victron Energy MultiPlus-II inverter/charger integrate with lithium and LiFePO4 batteries in 24V systems?
The Victron Energy MultiPlus-II inverter/charger integrates with lithium and LiFePO4 batteries in 24V systems through advanced battery management and communication protocols, ensuring safe and efficient charging and discharging cycles. It supports VE.Bus communication with compatible BMS units, enabling real-time monitoring, dynamic charge control, and load management. This integration allows for optimized performance, extended battery life, and reliable power delivery in demanding off-grid, marine, and mobile applications.
| Feature | Integration Method & Benefit |
|---|---|
| BMS Communication | Uses VE.Bus port for direct data exchange with a compatible Battery Management System. |
| Adaptive Charging | Adjusts charge voltage and current in real time per the BMS's instructions. |
| Load Management | Can shed non-essential AC loads if battery voltage drops to a critical level. |
| System Synchronization | Coordinates with other VE.Bus devices for scalable, balanced 24V power. |
What are the main benefits of VictronConnect Bluetooth monitoring for SmartSolar MPPT and DC-DC chargers?
VictronConnect provides a direct, user-friendly window into your system's performance, allowing instant adjustments from a smartphone. This Bluetooth link turns complex data from solar controllers and DC-DC units into actionable insights to maximize solar efficiency. You can fine-tune charging profiles for different battery systems, like AGM or deep cycle banks, and verify your setup performs optimally. This level of victron energy monitoring helps you optimise every charge cycle.
How does a Lynx Shunt VE.Direct provide accurate battery monitoring and power distribution in off-grid setups?
The Lynx Shunt delivers precise, real-time data on current flow and state of charge, forming the foundation for intelligent energy storage management. Its integration acts as the system's financial accountant, tracking every amp-hour consumed and produced.
Key contributions include:
- Providing critical data for the Cerbo GX communication centre.
- Enabling safe disconnect functions based on accurate readings.
- Forming the core of a scalable, modular power distribution hub for demanding off-grid systems. It is the backbone of the victron lynx power distribution ecosystem, ensuring reliable current measurement.
What role does the Orion XS DC-DC converter play in mobile power systems with 35A, 50A, or 70A charging?
The Orion XS series is engineered to reliably charge a service battery from a vehicle's alternator, even over long cable runs. Models like the 35A charger or 120A charger ensure your RV or mobile base's auxiliary batteries are consistently replenished while driving. Its robust design is ready to power your adventures by preventing drain on the starter battery. For high-demand installations, the XS 1400 model offers substantial power in a compact form factor.
How does VE.Can SmartSolar integration with Cerbo GX improve monitoring for complex solar power systems?
This integration creates a unified network where high-power MPPT RS solar chargers communicate seamlessly with the central Cerbo GX. It enables holistic oversight and control, turning scattered components into a single, smart ecosystem.
Benefits are:
- Centralized logging and visualization of all PV array and battery data.
- Advanced system automation and optimization based on total energy flow.
- Uninterrupted monitoring and remote access via VRM for complex, multi-source solar systems. This seamless energy management is a cutting-edge feature for professional-grade installations.
What warranty coverage applies to Victron Energy MultiPlus and DC-DC battery chargers under UL 1741 standards?
Victron's products come with a 5-year warranty, reflecting their confidence in product durability. This commitment is backed by decades of know-how translate into robust designs that meet strict UL 1741 certification for safety. The warranty assures users of dependable performance in a wide range of use cases, from residential backup to mobile applications. This coverage extends to advanced features like PowerAssist in the Quattro-II and the built-in transfer switches in 120V VE.Bus systems, ensuring your investment is protected.